Professional Documents
Culture Documents
17AR-02747-20190208-CRN Rev-0F02026 2C 14332657 01
17AR-02747-20190208-CRN Rev-0F02026 2C 14332657 01
February 8, 2019
In accordance with Section 4.3.2 of the CSA B51-09, “if a design is registered in all provinces and territories, the
CRN stamped on the nameplate and marked on the data report may be shortened to include the designation of first
registration plus the letter “C”…”
Therefore WIKA INSTRUMENTS LTD has selected the option of stamping Canada wide approved Pressure
Devices under the designation of “0F02026.2C”. Supporting documentation’s from all Provinces and Territories are
attached in this document.
HEAD OFFICE
WIKA INSTRUMENTS LTD. WIKA INSTRUMENTS LTD. WIKA INSTRUMENTS LTD. WIKA INSTRUMENTS LTD. WIKA INSTRUMENTS LTD. WIKA INSTRUMENTS LTD..
3103 Parson Road 2679 Bristol Circle, Unit #1 4932 – 52 Street S.E. #204, 9804 – 100 Avenue 901 First Avenue North 4627 Frances Street
Edmonton, AB Canada Oakville, Ontario L6H 6Z8 Calgary, AB Canada T2B 3R2 Grande Prairie, AB T8V 0T8 Saskatoon, SK S7K 1Y4 Burnaby, B.C. V5C 2R9
Tel: (780) 463-7035 Tel: (905) 337-1611 Tel: (403) 237-5960 Tel: ( 780) 513-7460 Tel: (306) 664-1105 Tel: (604) 299-3855
Fax: (780) 462-0017 Fax: (905) 337-2716 Fax: (403) 264-0095 Fax: (780) 513-7379 Fax: (306) 244-7037 Fax: (604) 299-4566
$ffi
the pressure equlpment safety aulhorily
Edmo nton, o, o" n": l:'"i: i:"-t[
Tel: (780) 437-9100 / Fax: (780) 437-7787
The design subrnission, tracking number 2018-04567, originally received on July 13, 2018 was surveyed
and accepted for registration as follows:
As indicated on AB-41 Statutory Declaration form and submitted documentation, the code of construction is
other e n g ineering an al y si s.
- This registration is valid only for fittings fabricated at the location(s) covered by the QC certificate attached to
the accepted AB-41 Statutory Declaration form.
- This registration is valid only until the indicated expiry date and only if the Manufacturer m.aintains a valid
quality management sysfem approvad by an acceptable thhd-party agency until that date.
- Should.the approval of the quality management system lapse before lhe expiry date indicated above, this
registration shall become void.
An invoice covering survey and registration fees will be fonararded from our Revenue Accounts.
lf you have any question don't hesitate to contact me by phone at (7S0) 433-0281 ext 3382 or fax (780)
437 -77 87 or e-mail stojanovic@absa.ca.
Sincerely,
STATUTORY DECLARATION
Registration of Fittings
ln this space, show facsimile of
Executive Vice President Process manufacture/s logo or
Franz-Josef Vooel lnsirumentation trademark as it will appear on
the fitting.
(name of applicanl) (position title) (must be in a position of authority)
located at
(name of manufaclurer)
6391 1 Ge
lWtffitl
do solemnly declare that the fittings listed hereunder, which are subject to the Safety Codes Act
(check one)
data which identifies the.dimensions, materials of construction, pressure/temperature ratings and the basis
for such ratings, and the harking of the fittings for identification.
I further declare that the manufacture of these fittings is controlled by a quality control program which has been
verified by the following authority, ISO 9001 as being suitable for the manufacture of these
fiftings to the stated standard. The fittings covered by this declaration, for which I seek registration, are
(brief descriplion of
ln support of this application, lhe following information, calculations and/or test data are attached:
(sign)
NOTES:
tpatev
To the best of my knowledge and belief, the application meets the requirements of
Standard 851, Clause 4.2, and is accepted for registration in Category
codes Act
^ff"f
Registration N ,'0",, ,0F02026'2 01K<
Date Registered: .lut 3 0 t0|$ Expiry Date: Y N, IOLO
Tho intormation you provide is necessary only for the administration ot lhe programs as required by u@.intt"
Pressure Equipmsnl Discipline.
2202 2nd Avenue
Regina, SK S4R 1K3 Canada
1 (866) 530‐8599
info@tsask.ca
www.tsask.ca
REGISTRATION OF A PRESSURE FITTING DESIGN
21‐Nov‐18
Wika Instruments Ltd.
3103 Parsons Road
Edmonton, AB
T6N 1C8
Athan Syrgiannis, P.Eng.
Codes and Standards Compliance
Remarks:
1) Addition to registered design.
2) CRN registered under reciprocal agreement and conditional upon compliance with the notes on the ABSA
registration dated July 30, 2018.
Extract of
Documentation CRN approval 0F02026.2
Harald Gollas
Corporate Approvals
© 2011 WIKA Alexander Wiegand SE & Co. KG, all rights reserved.
The specifications given in this document represent the state of engineering at the time of
publishing. We reserve the right to make modifications to the specifications and materials.
This extract shall not be reproduced except in full, without the written approval of WIKA
Alexander Wiegand SE & Co. KG.
WIKA Alexander Wiegand SE & Co. KG Tel. +49 9372 132-0 Kommanditgesellschaft: Sitz Klingenberg – Komplementärin:
Alexander-Wiegand-Straße 30 Fax +49 9372 132-406 Amtsgericht Aschaffenburg HRA 1819 WIKA International SE - Sitz Klingenberg -
63911 Klingenberg E-Mail info@wika.de Komplementärin: WIKA Verwaltungs SE & Co. KG – Amtsgericht Aschaffenburg HRB 10505
Germany www.wika.de Sitz Klingenberg – Amtsgericht Aschaffenburg Vorstand: Alexander Wiegand
HRA 4685 Vorsitzender des Aufsichtsrats: Dr. Max Egli
Project Ref.-No: 17AR-02747
General
1.1 Revision history of certification
Issue / Date Changes / references
revision
01 2011-03-11 Internal request 09AR-00072
Initial Release, models as stated in the CofC
02 2017-06-26 Internal request 14AR-01568
• Addition of new model designations, refer to the relevant tables
• Update of drawings
• Addition of manufacturing locations
WIKA Alexander Wiegand SE & Co. KG Tel. +49 9372 132-0 Kommanditgesellschaft: Sitz Klingenberg – Komplementärin:
Alexander-Wiegand-Straße 30 Fax +49 9372 132-406 Amtsgericht Aschaffenburg HRA 1819 WIKA International SE - Sitz Klingenberg -
63911 Klingenberg E-Mail info@wika.de Komplementärin: WIKA Verwaltungs SE & Co. KG – Amtsgericht Aschaffenburg HRB 10505
Germany www.wika.de Sitz Klingenberg – Amtsgericht Aschaffenburg Vorstand: Alexander Wiegand
HRA 4685 Vorsitzender des Aufsichtsrats: Dr. Max Egli
Project Ref.-No: 17AR-02747
N-1x MG-1
O-10 MH-x-xx
P-1x MHS-1
P-3x N-1x
PS-2x O-10
PSA-2x OT-x
PSD-3x P-1x
R-x R-x
S-1x P-3x
SA-1x PS-2x
PS-3
SL-1 PSA-2x
PSA-3x
TIS-1x PSD-1x
TIS-2x PSD-3x
PSD-4-xxx
UT-1x S-1x
XCM-1 SH-1
891.xx TIS-1x
S-20 TIS-2x
IS-3 TTF-1
TI-1 UT-1x
MPR-x XCM-1
TPR-x 891.xx
PSA-31 S-20
LW-1 IS-3
LF-1 TI-1
PS-3 MTF-x
PSD-4 MHC-1
PSD-4-ECO MHS
E-2 MY-17
S-21 PS-3
IS-4 E-2
AUT-1 S-21
GD-20 IS-4
CPG500 GD-20
CPG1500 CPG500
CPT6000 CPG1500
CPT6200 CPT6000
CPT6300 CPT6200
CPT6400 CPT6300
CPT7000 CPT6400
CPH7000 CPH7000
x - Any letter or number
All model designations maybe followed by numbers or letter, maybe separated by “-“.
WIKA Alexander Wiegand SE & Co. KG Tel. +49 9372 132-0 Kommanditgesellschaft: Sitz Klingenberg – Komplementärin:
Alexander-Wiegand-Straße 30 Fax +49 9372 132-406 Amtsgericht Aschaffenburg HRA 1819 WIKA International SE - Sitz Klingenberg -
63911 Klingenberg E-Mail info@wika.de Komplementärin: WIKA Verwaltungs SE & Co. KG – Amtsgericht Aschaffenburg HRB 10505
Germany www.wika.de Sitz Klingenberg – Amtsgericht Aschaffenburg Vorstand: Alexander Wiegand
HRA 4685 Vorsitzender des Aufsichtsrats: Dr. Max Egli
Project Ref.-No: 17AR-02747
1.5 Mechanical and Mechatronic Pressure – data sheets are in separate binders
Table 2: Overview mechanical and mechatronic pressure devices included in CRN approval
No changes compared with the last revision
Bourdon Tube Gauges Diaphragm Gauges / Differential Pressure Gauges
Capsule Gauges
111.1x 4xx.12 700.0x
111.2x 432.25
113.13 432.55 711.11
113.53 43x.x0, 45x.x0 712.25 DP
130.15 43x.x6, 45x.x6 712.25 DX
1x1.15 716.05
13x.11 53x.5x, 53x.3x 7xx.12
2x1.11 PG43SA-C 7xx.14
21x.20 PG43SA-S 732.2x
212.25 PG43SA-D 73x.x1
21x.34 APGT / PGT series 73x.18
21x.40 series
21x.5x 891.34.1998
2x4.11 DPGT series
222.3x series
230.15
232.25 DPG40
23x.3x DPS40
23x.5x DPGS40
26x.x0 DPGT40
26x.3x DPGS40TA
31x.11
312.20
332.11 DPGT43
33x.30 DPGS43
332.34 DPGT43HP
33x.50 DPGS43HP
332.54
34x.11 733.02
516.12, 516.11 7x2.15
516.41
PG23LT
PG23CP
PGT series
PGS series
series
series
All gauges model 6xx.xx, A2G-xx, 516.11, 516.40, 7x6.11: pressure <15psi, no CRN required
x - Any letter or number
WIKA Alexander Wiegand SE & Co. KG Tel. +49 9372 132-0 Kommanditgesellschaft: Sitz Klingenberg – Komplementärin:
Alexander-Wiegand-Straße 30 Fax +49 9372 132-406 Amtsgericht Aschaffenburg HRA 1819 WIKA International SE - Sitz Klingenberg -
63911 Klingenberg E-Mail info@wika.de Komplementärin: WIKA Verwaltungs SE & Co. KG – Amtsgericht Aschaffenburg HRB 10505
Germany www.wika.de Sitz Klingenberg – Amtsgericht Aschaffenburg Vorstand: Alexander Wiegand
HRA 4685 Vorsitzender des Aufsichtsrats: Dr. Max Egli
Project Ref.-No: 17AR-02747
All model designations maybe followed by numbers or letter, maybe separated by “-“.
990.xx
981.xx
983.xx
970.xx
Hydra Series
M93x.xx (seal mounted to gauge from above list)
Levelguard (seal mounted to level transmitter from above list)
FWG
FWP
FWA
FEW
TWA
PWJ
x - Any letter or number
All model designations maybe followed by numbers or letter, maybe separated by “-“.
The above models are covered under this CRN registration if mounted to a CRN approved measuring
instrument.
IFC Model 73
MFT Model 74
TF5x Model 75
SC15xx Model 76
SB15 TGS55
SW15 TGS73
TI 20 / 3x / 5x TGS53
TI.V 2x / 3x / 4x TGS54
TI.R 45 / 60 TG5x
TI 8x TI.xx.3A
TT 3x / 5x TG7x
MODEL 3x
Model 4x
Model 5x
Model 7x
TGS53
: CRN approval summary (2019)
WIKA Alexander Wiegand SE & Co. KG Tel. +49 9372 132-0 Kommanditgesellschaft: Sitz Klingenberg – Komplementärin:
Alexander-Wiegand-Straße 30 Fax +49 9372 132-406 Amtsgericht Aschaffenburg HRA 1819 WIKA International SE - Sitz Klingenberg -
63911 Klingenberg E-Mail info@wika.de Komplementärin: WIKA Verwaltungs SE & Co. KG – Amtsgericht Aschaffenburg HRB 10505
Germany www.wika.de Sitz Klingenberg – Amtsgericht Aschaffenburg Vorstand: Alexander Wiegand
HRA 4685 Vorsitzender des Aufsichtsrats: Dr. Max Egli
Project Ref.-No: 17AR-02747
TGS54
x - Any letter or number
All model designations maybe followed by numbers or letter, maybe separated by “-“.
The above models are covered under this CRN registration if mounted to a CRN approved thermowell. The
models listed as ‘installation also without thermowell’ are covered under this CRN registration if the application
allows for an installation without thermowell.
910.11, 910.12
910.13
910.15
910.25, 910.32, 910.80, 910.81
All model designations maybe followed by numbers or letter, maybe separated by “-“.
1.9 Additional models with pressurized wetted parts – data sheets are in separate binders
Table 6: Overview additional models included in CRN approval
Additional models
WIKA Alexander Wiegand SE & Co. KG Tel. +49 9372 132-0 Kommanditgesellschaft: Sitz Klingenberg – Komplementärin:
Alexander-Wiegand-Straße 30 Fax +49 9372 132-406 Amtsgericht Aschaffenburg HRA 1819 WIKA International SE - Sitz Klingenberg -
63911 Klingenberg E-Mail info@wika.de Komplementärin: WIKA Verwaltungs SE & Co. KG – Amtsgericht Aschaffenburg HRB 10505
Germany www.wika.de Sitz Klingenberg – Amtsgericht Aschaffenburg Vorstand: Alexander Wiegand
HRA 4685 Vorsitzender des Aufsichtsrats: Dr. Max Egli