Professional Documents
Culture Documents
1. You can find the information of Level, Height, Elevation, Mass.Mass Moment of Inertia, and Centre of mas
“Reports” tab> Post analysis Check report.
2. For the displacements( dx and dy) and rotation (Rz) of all modes, please go to Building analysis> Post anal
Analysis Results Display
i. For the displacements in x and y directions, you can Select the mode shape from the right panel (see imag
“Displacements” > Click “X” and “Y”, respectively> Read the displacements graphically.
Note: You can use the “Filter” in the “General” tab to filter the storey or members if there are too
http://help.protasoftware.com/en/Help/ShowContentForF1/317 28-Jan-20
Page 2 of 3
i. For the rotation in z, you can Select the Mode Shape from the right panel (see image below)> Click the “Pro
tab > select a Node around the centre of diaphragm > read from the list.
How to Create the mode displacement of center of mass diaphragm excel csv file:
• Load your project (that has an eigenvalue analysis) > Building Analysis > Post Analysis > Analysis Model &
• Pick a mode shape. A message will appear indicating the txt file has been created in the folder (as below)
http://help.protasoftware.com/en/Help/ShowContentForF1/317 28-Jan-20
Page 3 of 3
• The diaphragm displacements of the selected loading will be printed to the respective “csv” file.
• Explore using windows explorer and Double-click the file to open it in Excel.
http://help.protasoftware.com/en/Help/ShowContentForF1/317 28-Jan-20