Professional Documents
Culture Documents
Single ERS Support kit is designed for
installation of Single ERS mounted on
pole, mast, tower leg etc.
Flexibility
The Single ERS mount kit supports- Pole
mount and wall mount. Pole mount can be
installed on a wide range of vertical
structure such as pipes, angles and square
tubes. Wall mount can be directly drilled
and fitted in wall using the fasteners.
Quality
All components of the assembly are made
of hot dipped galvanized S355 steel with
mean galvanized coating of 90 microns
which supports corrosion resistance.
Easy to Assemble
Handling and installation of the parts of
assembly as parts are light weighted and
are not complicated.
MECHANICAL SPECIFICATION
Brackets Steel with Hot Dip Galvanization
Fasteners Grade 8.8, Galvanized/Zinc-Al-Flake coating
SUPPORTING STRUCTURE
Tube Ø50mm to Ø150 mm
90 Deg. Equal Angle 50mm x 50mm to 100mm x 100mm
Square Tube 50mm X 50mm to 120mm x 120mm
PERFORMANCE
Maximum equipment weight up to 30kg
Recommended Torque 6.0 Nm
Maximum wind speed 67m/s (240km/h, 149mph)
Compliant to RoHS.
Ericsson AB
www.ericsson.com 287 01-SXK 109 2006/1