Professional Documents
Culture Documents
Let’s see the six recommended practices for improving the power
quality:
2. Dedicated Panelboards
In addition to individual branch circuits, supply sensitive electronic
equipment from dedicated panelboards separate from other
loads such as motors and lighting. Install separate, dedicated
panelboards and feeders from the service entrance to supply the
segregated loads.
5. Electromagnetic Interference
Properly grounded metal-clad cables, shielded cables, or metal
conduits provide electromagnetic shielding and minimize interference
for circuits that serve sensitive electronic equipment. Many other
design techniques can be employed to minimize electromagnetic
interference.
6. Non-Linear Panelboards
Install panelboards that are suitable for non-linear loads to supply
sensitive electronic loads. Such panelboards typically have double-
capacity neutral buses to allow for individual neutral conductors for
each phase conductor and double-capacity neutral lugs for the
panelboard feeder.
Edvard Csanyi
Electrical engineer, programmer and founder of EEP. Highly
specialized for design of LV/MV switchgears and LV high power
busbar trunking (<6300A) in power substations, commercial buildings
and industry facilities. Professional in AutoCAD programming.
4 Comments
1.
ΣΤΑΥΡΟΣ ΤΣΑΚΑΛΑΚΗΣ
OCT 13, 2018
GOOD
(reply)
2.
David Castillo
JU L 1 7 , 2 0 1 7
That badly this page now no longer gives the option to be able to
download the file in PDF only nothing left to print it was better.
(reply)
3.
Kamogelo Peter
MAR 03, 2015
I HAVE N2 ELECTRICAL ENGINEERING CERTIFICATE INCLUDING
ELECTRICAL TRADE THEORY .AM LOOKING FOR LEARNERSHIP
AT ESKOM GENERATION