Professional Documents
Culture Documents
EE100 Courseoutline Spring 2020
EE100 Courseoutline Spring 2020
EE100 Courseoutline Spring 2020
Course Details
Credit Hours 1
Core Core Course for Electrical Engineering
Elective No
Open for Student Category SBASSE
Closed for Student Category N/A
Course Prerequisite(s)/Co-Requisite(s)
Pre-requisites: None
Co-requisites: None
Page 1of 3
Lahore University of Management Sciences
Grading Breakup and Policy
Assessment Module Numbers Weightage
Lab Tasks 7 5 x 4 + 2 x 6 = 32%
Assignment 1 6%
Course Project 1 5 + 3 x 4 + (14 + 3 + 5 + 3) = 42%
Viva/Lab Evaluation 1 20%
Attendance Policy: Attendance shall be marked by course TA within 20 mins of class start time. No attendance shall be marked afterwards. Each
lab attendance carries 1% of each lab
Missed Lab Policy: If you have missed your lab session then you should attend another lab section within same week with prior information,
otherwise 50% marks will be deducted on submitted lab task.
Late Lab-Submission Policy: If you delay your lab submission by one/two day 30/50% marks reduction penalty shall be applied. No submission is
allowed after two days.
Textbook(s)/Supplementary Readings
Textbook:
Lectures and handouts will be provided where necessary
Supplementary Reading:
A- Design and Technology, 2nd Edition, James Garratt, Cambridge University Press
B- Beginner’s Guide to SOLIDWORKS - Alejandro Reyes MSME, CSWE, CSWI
C- Basic Engineering Drawing, R.S. Rhodes & L.B. Cook
COURSE OVERVIEW
Week Related CLOs &
Module Topic Reference
No. Additional Remarks
Introduction to the course and its contents
Introduction to basic electronics components
Introduction to Arduino Board and its Programming
1 Lab Task 1: Basic Circuit Working A-Ch6
o Circuit prototyping using breadboard
o Controlling LED with potentiometer and button using
Arduino CLO1, CLO2
Introduction to computer circuit schematic design and Lab Task 1: 4.0%
simulation in Proteus software Lab Task 2: 4.0%
Tutorials: Create a simple circuit design in Proteus ISIS Lab Task 3: 4.0%
PCB Lab Task 2: Design a Reflex test PCB design and simulate it. Lab Task 4: 6.0%
2 Lecture Notes *Lab Task 5: 5.0%
Demonstration: PCB Fabrication: Introduction to conventional
/non-conventional PCB fabrication process. *: Course Project Related
Task
Demonstration: Etching and soldering
Demonstration: PCB CNC milling and drilling
Introduction to PCB layout design in Proteus software
3 Lecture Notes
Lab Task 3: Reflex test game PCB design and etching
4 Lab Task 4: Reflex test game PCB Soldering and testing. Lab Instructions
Page 2of 3
Lahore University of Management Sciences
Introduction to lathe machine and its operations
Workshop Technologies
o Conventional: (Introduction to the Process and basic
tools) (Casting, Forging ,Welding, Molding,
Machining, Fitting )
10 Lecture Notes
o Non –Conventional Prototyping Techniques/Additive CLO4
manufacturing (3D Printing, Selective Laser Lab Task 10: 4.0%
Machining Sintering,) Lab Task 11: 4.0%
Processes Demonstration: Conventional Machining Operations Assignment: 6.0%
Lab Task 10: Machine Tools and Processes Assignment deadline
CNC Machine Basics (1 Week)
Demonstration: 3D Printer
Demonstration: CNC Milling machine
11 Lecture Notes
Lab Task 11: G-Codes for a part file
Assignment: Machining a part on Lathe, Robot Chassis cutting
using Laser Cutter, Robot Name design 3D-printing
Introduction to your robot components
12 Lecture Notes
Robot building: Making your first mobile robot CLO1, CLO2, CLO3
Course System integration, Testing and troubleshooting for the mobile Competition: 14.0%
13 robot Lecture Notes Aesthetics : 3.0%
Project
Arduino Programming Basics Individual Participation: 5%
Poster: 3.0%
14 Course Project: Robot Competition
Examination Details
Combine/Separate: No
Final
Duration: N/A
Examination
Exam Specifications: N/A
Mid-Term
No
Examination
Page 3of 3