L # At 5m tusk 4] 3S A RADA]
Shandong Kerui Machinery Manufacturing Co.
ZJ14055-50D/4/5 3H ic
ZJ14055-50D/4/S High pressure Manifold
Ck S$ Serial NO.; 1504044)
br RR A
Delivery Documents
LERBS ih MARA
JIANGSU SHUANGXIN PETROLEUM MACINERY CO., LTD.
=O-sk#%aA
April 2015a &
Table of contents
l, FRE CLOBEM BAKERS
High Pressure Manifold Certificate of Conformity and Test Report
2. HAA LEBEN KARERS
Product Certificate of Conformity and Test Report
» 445 #&4 NDT report
» #4 & 4% Material Book
. #4 4% 4 4 Wall Thickness Test Report
. SRECRAEMH
Hi-Pressure Manifold Operation Manual
7, XM tk & Shipping List
8. §£ #14 F&A Hi-Pressure Manifold Drawing
a up w
9. AARGA A Biz # NDT Operator certificates
10. API 4 ISO < # API and ISO certificateLAMBA HAA BR al
JIANGSU SHUANGXIN PETROLEUM MACHINERY CO., LTD
JSSX/JL16-08
Batrin
CERTIFICATE OF CONFO}
7 ih 4 Product Name: jj /R FC High pressure manifold
H8% Drawing NO. : ZJ14055-SOD/4/5
14) 4H'S Serial Number: 1504044
‘ili ALS] Date of Manufacture: April, 2015
Asi EAU, FFE SY/T 5244-2006/API SPEC 16C HABER, HEFT!
THIS PRODUCT IS QUALIFIED AFTER INSPECTION AS PER THE STANDARD
SY/T 5244-2006/API SPEC 16CAND ALLOWABLE TO DELIVERY.
HEA: FMM: 2015.04
APPROVED BY DATE: April. 2015mit BRS
Product Pressure Test Report
PAM RRC aS
Product Name __| High pressure manifold | __ Drawing NO. Ne
ADE e BEEN
Nominal Size 5 Nominal pressure Sas
“Lee 290~101'C BUT SY/T 5244-2006/
Working temperature Execute standard API SPEC 16C
a eS SEB
Serial Number “ Specification level =
Fe RTH
Product Inspection Items
acd eA Air PEA BRA We
SIN Inspection item _|_Unit Requirements Inspection result_| Conclusion
RIE S3MPa, fH 3min
ke |S ‘Testing pressure S3MPa + ae a
wae | 2 holding time 3 min BASLE AT ake
1 2 =| pa No visible leakage,
Hydrostatic - yaa Qualified
wenden ee 7RJE S3MPa, #4JR 15min, | distortion and
i 8 Testing pressure 53MPa, | unusual noise
RG holding time 15min,
ped M€Ft3l 3.5MPa, FFE 3min,
ok EE ie Pressure increasing from zero
> | mate [RO], | 103.5MPa, holdingsmin FEA LBM a
Hydrostatic [|] ” | MEFEBIZSMPa, ABLE 1Smin, | No visible leakage | Qualified
leakage test | 7] & Pressure increasing from zero
Ra to 35MPa, holding 1Smin
a ot SECT PH, ERE BOER aie
Appearance ‘Smooth surface and good painting | Acceptable Qualified
WMA
Conclusion:
ARF cn FRIA SY/T 5244-2006/API SPEC 16C #xitiiiliz, ARIA H!
This product is acceptable as per the standard SY/T 5244-2006/API SPEC 16C
ESE ce
Inspector
i OME
Approved byLAMBA AMMA IRS Bl
JIANGSU SHUANGXIN PETROLEUM MACHINERY CO., LTD
JSSX/JL16-08
Fh 49K Product Name: 3-6 #8)/ 14H Stand pipe valve group
FS Drawing NO. + ZJ14055-50D/4/5-06
tii) 44% Serial Number: 1504044-06
‘ili FS Date of Manufacture: April, 2015
A BRK, FE SY/T 5244-2006 /API Spec 16C ATOR, HEFT!
THIS PRODUCT IS QUALIFIED AFTER INSPECTION AS PER THE STANDARD.
SY/T 5244-2006/API Spec 16CAND ALLOWABLE TO DELIVERY.
HONEA: (eal FM: 2015.04
APPROVED BY DATE: April. 2015Pmt eis
Product Pressure Test Report
Pr hBPs Ew Ae
Product Name Stand pipe valve group Drawing NO. ae Toe
RE = BED
Nominal Size z Nominal pressure SoMa
LAR 290~121°C BUT bate SY/T 5244-2006/
Working temperature Execute standard API Spec 16C
a aS EAH
Serial Number haa aies Specification level ee
Prem EH A
Product Inspection Items
ee GRR WA PEER BREE We
SIN Inspection item _|_Unit Requirements Inspection result _| Conclusion
KIB S3MPa, 3/5 3min
tke |S Testing pressure S3MPa , zee ae
mune |b B holding time 3 min BRAS ATPE |
1 é = | Mpa No visible leakage, :
Hydrostatic - - ee Qualified
7&JK S3MPa, #4K 15min, | — distortion and
strength test | s .
i 8 Testing pressure S3MPa, unusual noise
Ra holding time 15min,
Fey FBI 3.5MPa, FAK 3min,
iekIE lz Pressure increasing from zero
> | mante [RO |. | t03.5MPa, holding3min FEAT BR ra
Hydrostatic | 2 * | RIVHISMPa, FAK 15min, | No visible leakage | Qualified
leakage test | 1] § Pressure increasing from zero
Ba to 35MPa, holding 15min
3 ae OM SEE, meERE ER th
Appearance Smooth surface and good painting | ___ Acceptable Qualified
Pee
Conclusion:
ACP ih PEAR SY/T $244-2006/API Spec 16C +nHkiilii, BAM AH!
This product is acceptable as per the standard SY/T 5244-2006/API Spec 16C.
HR fh
Mie]
Inspector
tk OE (Ex
Approved byTAME A HVA IRS Bl
JIANGSU SHUANGXIN PETROLEUM MACHINERY CO., LTD
JSSX/JL16-08
Fh Product Name: Sf) HRI J#1 Surface valve
FAS Drawing NO. + Z314055-50D/4/5-12
th) i Serial Number: 1504044-12
‘#fali#i AH Date of Manufacture: April, 2015
AP BHR, F84 SY/T 5244-2006 /API Spec 16C HARBOR, HEF LT!
‘THIS PRODUCT IS QUALIFIED AFTER INSPECTION AS PER THE STANDARD
SY/T 5244-2006/API Spec 16CAND ALLOWABLE TO DELIVERY.
HORA: is #l FIM 2015.04
APPROVED BY DATE: April. 2015mit ERA
Product Pressure Test Report
Pane ‘LTT FL BS
Product Name ‘Surface valve Drawing NO. DSO
ARE a BLED
Nominal Size 4 Nominal pressure Se
TPE 29T~121'°C BUTE SY/T 5244-2006/
Working temperature Execute standard API Spee 16C
wy Bis MGB
Serial Number ee Specification level ae
Pea AL
Product Inspection Items
cee ise nene) Air PREMERA RRER Vee
SIN | _Inspection item _| Unit Requirements Inspection result _| Conclusion
FRI S3MPa, ‘FAUE 3min ,
ke |x Testing pressure S3MPa , eae
wom | 4 2 holding time 3 min BRAGA |
1 : =| Mpa No visible leakage, :
Hydrostatic - oars Qualified
: FRIE S3MPa, FE 15min, | distortion and
strength test | x F 4
bu 3 Testing pressure 53MPa, unusual noise
gg holding time 1Smin,
Ke SHB) 3.SMPa, HIE min,
HRALEE Iz Pressure increasing from zero
> | waite [esl Mpa |t03-SMPa, holding3min Fe LB Ate
Hydrostatic |< ASF Bl 3SMPa, Fa 15min, | No visible leakage | Qualified
leakage test | 1) § Pressure increasing from zero
Ra to 3SMPa, holding 1Smin
3 Be Mt SABO, nee: ABR a
Appearance Smooth surface and good painting | Acceptable | ‘Qualified
MAIS
Conclusion:
Acj™ GARR: SY/T 5244-2006/API Spec 16C RMEHie, AKI!
This product is acceptable as per the standard SY/T 5244-2006/API Spec 16C.
are let
Inspector ert
ft ME
Approved byLAMBA HMMA BR Bl
JIANGSU SHUANGXIN PETROLEUM MACHINERY CO., LTD
ISSX/JL16-08
7° uh2 PK Product Name: IL PF RGHY Riser gooseneck
i] DrawingNO.: 214055-SOD/4/5-01
PGS Product NO.: 1504044-01-1
14)” FISH Date of Manufacture: 2015.04 April,2015
AP thew, Fer APISPEC 16C ASER, MEP!
THIS PRODUCT IS QUALIFIED AFTER INSPECTION AS PER THE STANDARD.
API SPEC 16C AND ALLOWABLE TO DELIVERY.
aE AS | a FMA: 2015.04
Approved by Date: April,2015Pm ea
Product Pressure Test Report
Pie Br me
Product Name Rimetincanenst TREO. Z514055-S0D/4/5-01
ALS oF mA
Model 5 ‘Nominal pressure ponies
LAP Y Serb
Working temperature aie Execute standard APISPECI6C
Fame aL
Product NO. uae Date of Manufacture Bula os
Peak AA
Product Inspection Items
reg eK sty RMA IILIE A HEEE || ie
S/N Inspection Items Unit Requirements ec Conclusion
ARIE S3MPa, Whitt 3min,
Sk ER se
as RIVET ER. ee
MPa | Testing pressureS3MPa,
holding time 3 min,The surface
has no visible leakage
First hydrostatic
strength test
Acceptable | Qualified
ARIE S3MPa, iit 15min,
NU hk FERRIER aM
2 as wea | Teanga Mr ee || ee
‘Second hydrostatic balding Pas 15 min,The ¢ Acceptable | Qualified
sheng test has no visible leakage
Sha, WETS re 5 Al
2 || aes Smowth sutieandaced | AStatte | Qualified
PPE painting me saute
ROME
Conetusion:
ANP” AMAR APL SPEC 16C fxHEHE, ARH!
This product is acceptable as per the standard API SPEC 16C
PR secs UL) CAE)
Inspector oot i
th HE
Approved by
Date: April,2015LFMEA AMMA IRS A]
JIANGSU SHUANGXIN PETROLEUM MACHINERY CO., LTD
JSSX/JIL16-08
FE GhL AK Product Name: 377M Riser gooseneck
A DrawingNO.: 214055-S0D/4/5-01
FGF ProductNO.: 1504044-01-2
HJ” FLSA Date of Manufacture: 2015.04 April,2015
AS hb, TA API SPEC 16C ATOR, WEFT!
THIS PRODUCT IS QUALIFIED AFTER INSPECTION AS PER THE STANDARD
API SPEC 16C AND ALLOWABLE TO DELIVERY.
HEA: JA FU: 2015.04
Approved by Date: April,2015mit RRS
Product Pressure Test Report
Pein BK TEES aS
Product Name Riser gooseneck Drawing NO. AALS 0D OL
ES ” BEEN
Model 3 Nominal pressure acme
Le thE ms aT eRe
Working temperature pce at Execute standard IBESEEG 166
PS ABA
Product NO. LOH aE? Date of Manufacture oe
Pe MT
Product Inspection Items
re ou tr ne es a
SIN Inspection Items Unit Requirements aa Conclusion
SUK BER, ARIK S3MPa, Hit 3min,
AFCA WIR. + Pe A
; % brvall PE ae meer | at
First hydrostatic Seis Peess ae Eas Acceptable | Qualified
holding time 3 min,The surface
Steagivies: has no visible leakage
JKIE S3MPa, Jill 15min,
Sage Tee meme | of
2 | second hydrostatic | MP#) Testing pressureS3MPa, Acceptable | Qualified
3 holding time 15 min,The surface
esrengih ieee has no visible leakage
SRT, ERE .
Se OM BAER ate
2 Appearance Snooth se sped | Acceptable | Qualified
mM :
Conclusion:
ARF Hd APISPEC 16C pret, BRIO!
This product is acceptable as per the standard API SPEC 16C .
ise
i eal
Approved by
Date: April,2015LFMBA MMA IRA A]
JIANGSU SHUANGXIN PETROLEUM MACHINERY CO., LTD
JSSX/JL16-08
F°HhZAK Product Name: i /E HP High pressure straight tube
A & DrawingNO.: Z114055-50D/4/5-02
F* i443 Product NO.: 1504044-02-1
tH” FIM Date of Manufacture: 2015.04 April,2015
AP HB, FE APISPEC 16C ABR, WEFT!
THIS PRODUCT IS QUALIFIED AFTER INSPECTION AS PER THE STANDARD
API SPEC 16C AND ALLOWABLE TO DELIVERY.
HEA: Hl Hii: 2015.04
Approved by Date: April,2015FRRERS
Product Pressure Test Report
PARR wEAS as
Product Name High pressure straight tube Drawing NO. 21 g0ss-sODAlS-02
ES ” PEED
Model 8 Nominal pressure BoMbs
LAP iE 4 DT bre
Working temperature a Execute standard aneteee e
Ph Hy AME
Product NO. a Date of Manufacture en
ath AR A
Product Inspection Items
: Fi :
ms) man jae] pete BRP ||: we
SIN Inspection Items Unit Requirements ae aan Conclusion
* eee ARIE S3MPa, Jilh} 3min,
a ae area omer | th
1 First drostaic | MP#| Testing pressureS3MPa, Acssatibte :| Qualified
tent holding time 3 min,The surface
arent has no visible leakage
oo ey ie es JRIE S3MPa, Jittt 15min,
7S | | eae pele “ak
. a | Testing pressureS3MPa, :
Secon rere holding time 15 min,The surface | ceePtable | Qualified
eoenene has no visible leakage
SeGLIE AH, MRR IETE fe
3 4 a Smooth surface end good | WHR ee
ppearance Santis Acceptable | Qualified
P= EAU APLSPEC 16C AME, HM ere!
This product is acceptable as per the standard API SPEC 16C .
EA Re
Inspector
Approved by
FORE (AF)
i : és
ation’
Date: April,2015,LAMBA MURA IR A
JIANGSU SHUANGXIN PETROLEUM MACHINERY CO., LTD
IJSSX/JL16-08
Peuh%Ps Product Name: Ml TL FH High pressure straight tube
fA & DrawingNO.: ZJ14055-50D/4/5-02
P*iFG Product NO.: 1504044-02-2
Hi” FB Date of Manufacture: 2015.04 April,2015
Asp Zeke, PA APLSPEC 16C BRIGR, HEFL!
‘THIS PRODUCT IS QUALIFIED AFTER INSPECTION AS PER THE STANDARD
API SPEC 16C AND ALLOWABLE TO DELIVERY.
HORA. (Ex FIM: 2015.04
* A
Approved by Date: April,2015mit ERA
Product Pressure Test Report
PBA BEE aS 5
Product Name High pressure straight tube Drawing NO. Zu ab ae
ALS ” HEED
Model a Nominal pressure cae
LEA BE 8 DUT RHE
Working temperature eA Execute standard ABLSEECAGC,
Pha Ss wy A
Product NO. Jomsoae tage Date of Manufacture anise
7h A
Product Inspection Items
Fi ‘
Bg eee ui, pV RA BREA | we
SIN Inspection Items | Unit Requirements pas Conclusion
Sh —detok BNE ARIE S3MPa, Jatt} 3min,
ATA NS. oe +
‘ % nia | ah eR | the
First hydrostatic ole Ba By Acceptable | Qualified
Sener holding time 3 min,The surface
Sree) has no visible leakage
SB Ue BRIE AR Sora JAiltt 15min,
GAA MISH. ty Zz
21 g atti static | MP2 | Testing pressureS3MPa, ae ott
ree A ee a holding time 15 min,The surface
mg has no visible leakage
Pha, TERE
de OM OER ah
Ss Appearance eee re a Bood Acceptable | Qualified
This product is acceptable as per the standard API SPEC 16C
ER MUU CATED
tnpecoe fit
Date: April,2015LEMS A MMM IRA A
JIANGSU SHUANGXIN PETROLEUM MACHINERY CO., LTD
JSSX/JL16-08
F*h4%K Product Name: itif&%3 High Pressure Bend
8 -& DrawingNO.: ZJ14055-50D/4/5-03
* 4a" Product NO.; 1504044-03-1
ii” FUSE Date of Manufacture: 2015.04 April,2015
AT ht, A APLSPEC 16C AREHK, HEF HT!
‘THIS PRODUCT IS QUALIFIED AFTER INSPECTION AS PER THE STANDARD
API SPEC 16C AND ALLOWABLE TO DELIVERY.
¥
HORA SK FL: 2015.04
Approved by Date: April,2015mit eR a
Product Pressure Test Report
PEE Se as
Product Name High Pressure Bend Drawing NO. ALI >-- ODA
aS ” we
Model 2 Nominal pressure ae
CAPA a DMT nie
Working temperature ete, Execute standard BETSEBC AGG,
Pine a A
Product NO. Dyn Date of Manufacture aloy
Path RT
Product Inspection Items
zn
ee meme hte AMARA a
SIN Inspection Items Unit Requirements ait | Conclusion
ult
SU RE ome
1 = MPa | ” Testing pressureS3MPa, feet att
First hydrostatic holding ES 3 min, The qurtace: Acceptable Qualified
strech test has no visible leakage
we A . aE att
2 MP: F
Second hydrostatic iH Rane eis eS face | Acceptable | Qualified
eaeanin st has no visible leakage
Sha, TEE k
3 = wm Smooth surface and good ABR ait
pearance eathine Acceptable | Qualified
HA +
Conclusion:
ANF MHI API SPEC 16C PRiEHE, ARH!
‘This product is acceptable as per the standard API SPEC 16C .
a eee —
rmpecor [th
om [ky
| Approved by len!
Date: April,2015LAMBA AMMA IRA A]
JIANGSU SHUANGXIN PETROLEUM MACHINERY CO., LTD
ISSX/JL16-08
2% Product Name: ij/k*#¥ High Pressure Bend
A & DrawingNO.: —214055-50D/4/5-03
Fai Product NO.; 1504044-03-2
HHJ~ FU Date of Manufacture: 2015.04 April,2015
ARAM, Fi APISPEC 16C ABR, HET!
THIS PRODUCT IS QUALIFIED AFTER INSPECTION AS PER THE STANDARD,
API SPEC 16C AND ALLOWABLE TO DELIVERY.
HEA: FM: 2015.04
Approved by Date: April,2015Fakes
Product Pressure Test Report
PBR PROT Ae
Product Name High Pressure Bend Drawing NO. ZA S SOD ISIS-N3,
UALS ” WEED
Model : Nominal pressure Bors
LPR oa SUT RHE
Working temperature esate Execute standard SEISEECAGG
Pe ahh Hy” A
Product NO. Isc Date of Manufacture ae ot
Pea
Product Inspection Items
= i ;
re a ee rae RAR ol”. ie
SIN Inspection Items | Unit Requirements eealt | Conclusion
8 — Veli ok BE KES S3MPa, [Att 3min,
w
REALE. momr | am
: First hydrostatic | MP#| | Testing pressures3MPa, Acceptable | Qualified
nek eat holding time 3 min,The surface
has no visible leakage
SRK SRR E AE a Dil 15min,
; a Ms [ee arewer | ate
, esting pressureS3MPa, 7
te holding time 15 min,The surface | A°°ePtable | Qualified
ee has no visible leakage
SAGE, WIFE fe BE Sie 4
3 A a ‘Smooth surface and good HABER tt
\ppearance Sie Acceptable | Qualified
IE:
Conclusion:
ASP" AHIR APLSPEC 16C #77, AREA!
This product is acceptable as per the standard API SPEC 16C
a Ree — RPL (AR)
inpecor (HLA Ss ‘
ih 3
Approved by UE! Date: April,2015LAMBA AMAA IRA By
JIANGSU SHUANGXIN PETROLEUM MACHINERY CO., LTD
ISSX/JL16-08
PEMA AK Product Name: ji/K#E High Pressure Bend
I -& DrawingNO.: 214055-50D/4/5-04
Fea Product NO.; 1504044-04
iJ” FUME Date of Manufacture: 2015.04 April,2015
AP AM, Fe APLSPEC 16C HARBER, HET IT!
THIS PRODUCT IS QUALIFIED AFTER INSPECTION AS PER THE STANDARD
API SPEC 16C AND ALLOWABLE TO DELIVERY.
HEA: FM: 2015.04
beh
Approved by Date: April,2015Pik BARA
Product Pressure Test Report
Pheer Ese aS 7
Product Name High Pressure Bend Drawing NO. BILAOSS-SODNS OH
PUBL ” REED
Model ey ‘Nominal pressure pe
TAPE ee DUT ee
wicca et 29~121°C eat API SPEC 16C
Pea i a A
Product NO. a al Date of Manufacture ARIS.
Point) AAA
Product Inspection Items
me) eee ay AEC IRIE AK Beek | He
aN Inspection Items | Unit Requirements a Conclusion
8 — det ER eee
1 cei ssn, | MPO| Testing presumstihis, pinoer ot
First hydrostatic bold ee he curface | Accertable | Qualified
strength test has no visible leakage
lk TERLODA fee oe
2 = MPa | Testin; presureS3MP eae ox
Second! hydrostatic holding time 13 min,The gurface | Acceptable | Qualified
strength fet has no visible leakage
SacBee, WSEAS rt: De i &
RO Ie
Conclusion:
ASE GH APLSPEC 16C AHMET, BASH!
This product is acceptable as per the standard API SPEC 16C .
HR ae
imonir (ll
3
ie He ie xl
Approved by Date: April,2015