Professional Documents
Culture Documents
linkedin.com/pulse/wattage-vs-lumens-know-difference-better-lighting-peter
27 artículos
With the push for LED lighting, there is a lot to take into consideration now for lighting levels. One of the
biggest arguments isa light Wattage versus the Lumens and determining brightness. The old way of looking
at how bright a light will be is to look at the wattage, and with incandescent lamps, the higher the wattage the
lamp is, the brighter it is. Now we need to focus on the Lumens of the lamp to determine the brightness of
the lamp, especially when it comes to LEDs.
For instance:
• 40 Watt incandescent lamp produces only 380-460 lumens and uses 40 Watts of energy per hour.
• 100 Watt incandescent lamp produces 1700 – 1800 lumens and uses 100 Watts of energy per hour.
• Direct sunlight is around 100k lumens and uses no amount of energy per hour.
This was an inefficient way of lighting and there have been many advances, such as the introduction of
compact fluorescent lighting as well as metal halide, low pressure sodium and high pressure sodium.
Fluorescent and compact fluorescent produce better lighting with lower wattage; however, have some
environmental factors to take into consideration. Metal halide, LPS and HPS produce better lighting than
standard incandescent; however, they are typically much higher in wattage and use much more power than
their CFL or LED counterparts.
For instance:
• A 100 Watt incandescent is now replaced with a 32 Watt CFL or a 15 Watt LED
Switching to CFL or LED can provide the same or better lighting while using a fraction of the original power.
For example, I use 7 Watt LED bulbs in my kitchen can lights and it is very bright. This was switching out from
32 Watt CFL lamps. Outside there were three 150 Watt incandescent bulbs for around a 150 sq ft area and
have since been replaced with 13 Watt CFL lamps. Now the areas are lit with much better lighting while only
costing a small percentage of the original power requirement.
Solar lights are also typically lower to the ground and then can produce more lighting with a lower Watt
lamp and using a higher Lumen efficiency.
Most solar lighting systems use fixtures ranging from 20 Watt LED (2000+ Lumens) to 90 Watt LED (9000+
Lumens) and are typically in the 35 Watt to 50 Watt range for most applications. High security or light level
requirements use the brighter lights and residential and remote areas use the lower range.
And since most well manufactured LED fixtures, such as the Bridgelux fixtures, provide directional LED. This
means the lights is directed at the ground with specific distributions to provide the required coverage.
Standard lamps are round and provide light / Lumens in all directions, whereas the LEDs push the light
directly to the area it is needed. One of the biggest mistakes are people making the switch from older lamps
at around 400 Watts and only moving down to a 300 Watt LED. A much lower wattage LED can be used.
In the end, taking into consideration the lighting levels and Lumens over the Wattage of the lamp will provide
a more energy efficient lighting system. Higher Lumen and lower Wattage lamps, especially with LEDs, will
provide the best lighting with the lowest energy costs.
Publicado por
Reacciones