Professional Documents
Culture Documents
① Push to open.
2. Insert the 'formatted" SD card into a card reader in your
y cover will
③ Battery ill ope
open
n do
d
downwa
wnward
downward. ④ SD card is inserted in a slot
②Slide in the direction of the
arrow on the battery cover.
by direction of a figure. PC.
*It is releasable if a card is pushed once again.
3. Please run "T14sgUpdate.exe".
FX-22:
SD card slot
*Don't
*D
Don mistake the
both sides/ the
b
direction of
SD card.
k SD card
② It inserts until it locks d into
i t SD
S card slot.
① A side cover is opened.
*It is releasable if a card is pushed once again.
Update
3. Please select "YES" and touch
RTN .
-1-
3. Update software of T14SG/FX-22
1. Please insert the SD card which includes the update
file.
2. Push the HOME/EXIT button.
3. While still holding the HOME/EXIT button, power on
the transmitter.
T14SG:
HOME/EXIT U.MENU/MON.
button button
FX-22:
HOME/EXIT U.MENU/MON.
button button
-2-
T14SG/FX-22 Installing Speech Data Ver.2
Before installing the speech data, you will need to update your T14SG/FX-22 software to Version 2.0 or later.
If the software version of T14SG /FX-22 is before Ver.2.0, the speech data can not be installed.
Ver.4.x software of T14SG/FX-22 is not able to play the Ver.1 sound data. After updating to Ver.4.x , please install the Ver.2 sound data
to T14SG/FX-22.
There are three language versions, English, German, and Japanese, in speech data. It is possible to install only one language.
If you install a second language, it will override the first one that you installed.
[Installing procedure]
1. Making of card for installing speech data
1. Please unzip the zipped file. The following files will be
created.
(QJOLVK9HUVLRQ
؞7VJ,QVWDOO6RXQG(QJH[H
؞7VJ8SGDWHGDW
؞76*B,167$//B6281'GDW
؞7VJ6SHHFK(QJELQ
؞7VJ6SHHFK(QJELQ
؞7VJ6SHHFK(QJELQ
*HUPDQ9HUVLRQ 2. Install speech data of T14SG/FX-22
؞7VJ,QVWDOO6RXQG(QJH[H 1. Please insert the SD card which includes the installing
؞7VJ8SGDWHGDW speech data.
؞76*B,167$//B6281'GDW 2. Push the HOME/EXIT button.
؞7VJ6SHHFK*HUELQ
؞7VJ6SHHFK*HUELQ
3. Still holding the HOME/EXIT button, power on the
؞7VJ6SHHFK*HUELQ
transmitter.
-DSDQHVH9HUVLRQ INSTALLSOUND
INSTALLING
؞7VJ6SHHFK-SQELQ
for three seconds. The speech
data begins to install.
2. Install the already formatted SD card into your PC's
card reader. 6 . A f t e r a b o u t 16 s e c o n d s , INSTALLSOUND
INSTALLSOUND
7. The uploading may appear to INSTALLING
progress slowly.
COMPLETED
minutes.(About. 2 min.)
And, COMPLETED is displayed.
Please turn off the power.
4. Select the drive that your card reader is assigned to in (Don't turn off the power before COMPLETED is
your PC. Click "OK". displayed.)
Update
-3-
1M23N27932 T14SG/FX-22 Software Update Changes
(Version 7.x)
7KLV VRIWZDUH XSGDWH PRGL¿HV IHDWXUHV IRXQG RQ WKH 6*); ,I \RX KDYH TXHVWLRQV DERXW WKHVH XSGDWHG GLUHFWLRQV SOHDVH FRQVXOW \RXU
LQVWUXFWLRQPDQXDORUIXWDEDUFFRPIRUIXUWKHUGHWDLOV5HIHUWRWKHRULJLQDOPDQXDOZKHUHDSSOLFDEOHEXWUHSODFHWKHVWHSVLQGLFDWHGEHORZZLWK
WKHVHLQVWUXFWLRQV
76*);KDGODQJXDJHV&KRRVHIURPWKHVH¿OHV
2.【All Model Types】Altitude Sensor "SBS-02A"
Language table It corresponds to SBS-02A, so that the indicator is changed to
9HUVLRQ1R 6HOHFWDEOHODQJXDJH 0.1m step from 1m step. And, the sensor name is changed to
9HU (QJOLVK -DSDQHVH *HUPDQ "SBS-01/02A" from "SBS-01A".
9HU$ (QJOLVK 'XWFK )UHQFK * The adjustment setting of the alarm is 1m step.
9HU% (QJOLVK 6SDQLVK &]HFK * When "SBS-01A" is used, the digit of 0.1m is indicated always 0.
9HU& (QJOLVK 5XVVLDQ ,WDOLDQ
Number of
3
usable slots
0.1m step
It corresponds to
SBS-02A
SBS-01C
Alarm setting is
1m step.
It corresponds to
SBS-02A
Airbrake
doesn't move.
)87$%$&25325$7,213KRQH)DFVLPLOH
<DEXWVXND&KRVHLPXUD&KRVHLJXQ&KLED-DSDQ
©FUTABA CORPORATION 2017, 03 (2)