Professional Documents
Culture Documents
Positive/Supply
Printer Type
Air
LOCATION SUBSTRATE
Application Inhouse Air Dryer
COMPONENTS TO CHECK
Charge Electrode
✔
Secure
Screws
Line ✔
Connections
✔
Charge Electrode Drop Generator
✔ ✔
EHT Plates
LED light/BUP
✔ ✔
Gutter ✔
✔ Nozzle
CHARGE ELECTRODE CONDITION
BEFORE AFTER
DEFLECTOR PLATES CONDITION
BEFORE AFTER
AIR FILTER
BEFORE AFTER
BEFORE AFTER
AX -SERIES
PARAMETERS
Production Statistics Adjustment
Getting Statistics Pressure (mbar)-
Counter Modulation
Products Detected- Pump Speed (rpm)-
Options
Resettable Counter(1)- Actual Visc. (cP)-
Prints Since Power On- Pressure Expected Visc. (cP)-
View Logs
Message-From Editor Ink Temp. (°C)-
Message Count- Upper Visc. (cP)-
External
Signal Failures- Lower Visc. (cP)-
I/F
Machine Time- Conduit Compen’n- 3M
Since Power On- Heater State- ENABLED
Jet Time- Gutter Pump (rpm)-
Since Power On-
Adjustment
ABC Jet 1 -
Modulation
Mod’n Level-
Pressure Mod’n Mode- Fixed
BUP Time-
Charge Level (V)-
External
Head Temp. (°C)-
I/F
OK
99 25 112
3003 -132 Auto
3.7 OPEN 298
42
ENABLED CLOSE
465
OK
52
1021
Message Position Details
Print Speed 400
Delay 100
Height 100
Width
Stroke Pitch .43
No. of Characters
Raster
Print Quality
END OF DOCUMENT