Professional Documents
Culture Documents
www.dextragroup.com
2 Dextra | | The Ultimate Splicing System
Benefits
STEP 1
▪▪ No reduction of the bar cross section area.
STEP 2
▪▪ Allows full ductile elongation of bars. Even when both bars cannot be turned,
▪▪ Type 2 coupler suitable for seismic areas. the Bartec® system uses a standard
TYPE
Rebar preparation:
A 3-Steps Process
90°
The end of the reinforcing bar is The sawn end of the reinforcing Finally, the enlarged end of
sawn square. bar is then enlarged by a the rebar is threaded to the
patented cold forging process. required length.
The core diameter of the bar is
increased to a pre-determined
size.
www.dextragroup.com 3
Applications
Caging splice
Coupler and
To connect cages that haven’t been threaded stud
connection.
Smaller diameter rebar
Transition splice
When there is a need to splice bars of different sizes,
it is allowable in most cases to reduce the size of the
larger bar and to use a standard coupler.
Small size
Large size
Headed Bars
Also called “End Anchors” they are convenient alternative
to hooked bars to provide end anchorages in congested
areas. Bartec® standard anchorage heads are circular and
have a net bearing area of 4 times or 9 times the cross- Prefabricated Cages
section of the bar.
Quality Assurance
Weldable couplers
For composite construction where concrete reinforcement
bars must be welded to structural steel, use Bartec® TH006540 QSC-706
Generic specification
POCC TH.CЛ87. RU.MCC.
H01502 142.313.28406
› No reduction of the nominal cross section area of the parent bars.
ICC EVALUATION
› Parallel-thread system. SERVICE
ESR-2166 & N° 130-2013
ESR-1705
Design tools
Available on www.dextragroup.com
Note : The information in this catalogue is considered up to date at the time of publication. We reserve the right to make technical
and design changes at any time. Dextra shall not accept liability for the accuracy of the information in this publication or for any
printing errors.
Bartec brochure - January 2018 - PS
rabia
Saudi A
Tower,
Jeddah
am
ge, Vietn
an Brid
Nhat T
Vietnam
ark 81,
Landm
HEADQUARTERS
THAILAND EUROPE NORTH AMERICA
Dextra Manufacturing Co.,Ltd. Dextra Europe SARL Dextra America Inc.
Tel: (66) 2 021 3800 Tel: (33) 1 45 53 70 82 Tel: (1) 818 261 5166
www.dextragroup.com