Professional Documents
Culture Documents
21
MTCO 1390 / TSU 1391
Dear user,
The MTCO 1390 records the vehicle speed, the distance trav-
elled and the driving and stationary times of the vehicle.
Connect the MTCO 1390, just like the device type MTCO 1324,
to the test device via the test and programming interface (1).
CTC measuring
Automatic measuring track
Manual measuring track
Device testing
Speed test
Odometer test
Test chart
Variable speed
Clock test
Programming
Installation data TCO
k constant
n constant
Wheel circumference
Odometer
VIN (Vehicle identification number)
Configuration
CAN configuration
Product code
Drive shaft ppr
Installation date
Calibration date
Seal number
Max. speed
RPM recording
Rear axles
Date – time
Programming TCO
Programming CTC
Time zone
Change-over times
Activate KITAS
Manufacturing data
Distance covered
Erase error memory
Save TCO data
Read TCO Data
Write TCO Data
Load DTCO data
Language
German
English
French
User defined
Download language*
Checksum/test
Adjustments*
With the CTC you can test the following functions of the
MTCO 1390:
• Speed test
• Odometer test
• Test chart (without recording of the working times)
• Variable speed
• Clock test
Carry out the device testing in the same way as for the device
type MTCO 1324.
With the CTC you can programm or request the following data
from the memory of the MTCO 1390:
• Installation data*
• Date – time
• Manufacturing data
• Distance covered
• Erase error memory
Carry out the programming in the same way as for the device
type MTCO 1324.
You can enter the following installation data with the pro-
gramming of the MTCO 1390:
• k constant
• n constant
• Wheel circumference
• Odometer
• VIN (Vehicle identification number)
• Configuration
• CAN configuration
• Product code*
• Drive shaft ppr
• Installation date
• Calibration date
• Seal number
• Max. speed*
• RPM recording*
• Rear axles*
Carry out the entry of the installation data in the same way as
for the device type MTCO 1324.
* The entry of the present data differs from the procedure for
the device type MTCO 1324 and will be described in detail on
the following pages.
You can set the individual versions in the 6th to the 16th place
of the product code.
2 TCO evaluation
# PRODUCT CODE #
The CTC reads out the tachograph type and the pa-
TCO - EVALUATION rameter data.
PLEASE WAIT
2 TCO evaluation
# MAX. SPEED #
The CTC reads out the tachograph type and the pa-
TCO - EVALUATION rameter data.
PLEASE WAIT
For the 7 day device, the rpm ranges will be recorded on the
front side of the chart.
Example The following limit values for the rpm recording have been
programmed into the MTCO 1390 ex works::
• Lower limit: 900 [min-1]
• Upper limit: 1400 [min-1]
When entering the limit values for the rpm recording, the val-
NOTE ue for the upper limit (HIGH LIMIT) must exceed the value for
the lower limit (LOW LIMIT).
7 TCO evaluation
# HIGH LIMIT #
The CTC reads out the tachograph type and the pa-
TCO - EVALUATION rameter data.
PLEASE WAIT
2 TCO evaluation
# REAR AXLES #
The CTC reads out the tachograph type and the pa-
TCO - EVALUATION rameter data.
PLEASE WAIT
Connect the TSU 1391, just like the device type MTCO 1324,
to the test device via the test and programming interface (1).
CTC measuring
Automatic measuring track
Manual measuring track
Device testing
Odometer test
Variable speed
Clock test
Programming
Installation data TCO
k constant
n constant
Wheel circumference
Odometer
VIN (Vehicle identification number)
Configuration
CAN configuration
Product code
Drive shaft ppr
Installation date
Calibration date
Seal number
Date – time
Programming TCO
Programming CTC
Time zone
Change-over times
Manufacturing data
Distance covered
Erase error memory
Save TCO data
Read TCO Data
Write TCO Data
Load DTCO data
Language
German
English
French
User defined
Download language*
Checksum/test
Adjustments*