Professional Documents
Culture Documents
Soldering Classification
Soldering Iron
Is a hand tool that is used in soldering, It
supplies heat to melt solder. To attach two
metal parts. A soldering iron is composed
of a heated metal tip and an insulated
handle.
Soldering Stand
A soldering Stand is used to keep the hot
soldering iron away from you and the
work area. It is made out of metal and
comes with a clening sponge to clean the
Soldering Iron Tip.
Desoldering Pump
Is used in removing soldered wires and
components on PCBs for troubleshooting
and repairing Purposes.
Name: Caraig, Marcus Jahred Abracosa Section: Grade 8-Tulips
Teacher: Mrs. Luisa L. Calderon Subject: EPAS 8
Cutting Classification
Scissors
Is a hand-operated shearing instrument
that is used for cutting cloth, Paper, and
other materials.
Utility Knife
Is a tool that is being used in cutting various
trades and crafts for any purposes. It is
fixed with a blade cutting edge suitable
for any general works. Such as Electronic
Purposes.
Hacksaw
Is a fine-toothed saw, Originally and
mainly made for Cutting metals.It is consist
of a metal arch with a handle that fits
around a narrow blade.
Name: Caraig, Marcus Jahred Abracosa Section: Grade 8-Tulips
Teacher: Mrs. Luisa L. Calderon Subject: EPAS 8
Splicing Classification
Wire Stripper
I a tool that is designed to remove the
Protective Covering of a wire or a cable.
Because wire comes with different sizes,
there are many holes that fits in any size of
a wire.
Driving Classification
Phillips Screwdriver
Is used to drive or fasten positive slotted
screws. It is a screwdriver that could take
greater torque and could provide tighter
fastening.
Flat Screwdriver
Has a wedge-shaped flat tip, used to
tighten or loosen screws that have a
straight or negative slot.
Screwdriver
Is a tool that is used for tightening or
loosing screws. It consists of a metal rod
with a flat or crossed-shaped end that fits
in the screws.
Name: Caraig, Marcus Jahred Abracosa Section: Grade 8-Tulips
Teacher: Mrs. Luisa L. Calderon Subject: EPAS 8
Boring Classification
Electric Drill
Is used for boring holes on Plastic or Metal
chassis with the use of drill bits having sizes
from 1/6” – 1/4”.
Name: Caraig, Marcus Jahred Abracosa Section: Grade 8-Tulips
Teacher: Mrs. Luisa L. Calderon Subject: EPAS 8
Auxiliary Classification
Ball-Peen Hammer
Is a type of hammer used in metalworking.
It has two heads, one flat and the other
called Peen is a rounded Shaped.
Magnifying Glass
This is used to produce a Magnified image
of an object. Or it helps us to see an
object mor clearly and focused.
Name: Caraig, Marcus Jahred Abracosa Section: Grade 8-Tulips
Teacher: Mrs. Luisa L. Calderon Subject: EPAS 8
Files Classification
Flat File
I parallel in width and tapered in Thickness,
they are used for flat Surfaces and Edges.
Round File
Also called as “Rat-Tail File” Used in
enlarging round holes or cutting a
scalloped edge.
Half-Round File
Is Tapered in width and Thickness. And is
narrower than a standard half round and
used for filling inside of rings.