You are on page 1of 1

EcoView TM WALLCOVERING

PHYSICAL PROPERTIES
U.S. UNITS METRIC UNITS
Total Weight 10.2 oz/lin yd 231 g/sq. meter
Break Strength 108 x 77 (warp x fill) lb/sq in 14.2 x 5.4 kg/cm2
Tear Strength 68 x 51 (warp x fill) Elmendorf unit 68 x 51 (warp x fill) Elmendorf unit
Backing Osnaburg Osnaburg
Width 52/54” 132/137 cm

FEDERAL SPECIFICATIONS
Vycon® EcoViewTM wallcovering meets Type II specifications per G.S.A. Federal Specification CCC-W-408D
using test procedures detailed in Federal Specifications CCC-T-191-B.
FIRE RATING
All EcoViewTM wallcovering products meet or exceed G.S.A. Federal Specification CCC-W-408D for Type II
wallcoverings. All products are Class “A” Fire Rated and accepted for use under the New York State Fire,
Gas and Toxicity Law and New York City Toxicity Law.
FIRE HAZARD CLASSIFICATION RESULTS
• TESTED IN ACCORDANCE WITH ASTM E-84 TUNNEL TEST
• CLASS “A” FIRE RATED
• FLAME SPREAD 15
• SMOKE DEVELOPED 0
This product is intended for use in buildings that are properly designed and maintained to avoid
moisture infiltration, condensation and/or accumulation at wall cavities and wall surfaces, particularly
in warm, humid climates.
INSTALLATION
All installations must conform to J. Josephson’s current Hanging Instructions, included with each
shipment, and Product Technical Information which are available at www.VyconWallcovering.com
FEATURES LOW VOCs
EcoViewTM products have such low VOCs (volatile organic compounds) that they meet the California section
01350 IAQ test requirements for wallcoverings.
FEATURES HIGH PERMEABILITY
All EcoViewTM wallcoverings exhibit high permeability ratings of greater than 20 Perms based on test results
from U.S. Testing according to ASTM E96- Procedure A dry cup method.
ANTI-MICROBIAL FEATURES
Non-woven wallcoverings contain bactericides and mildew inhibitors to discourage the growth of mold and
mildew under normal conditions.
AVAILABILITY AND RUN SIZE
All EcoViewTM wallcoverings have a minimum run of 900 yards.
5-YEAR WARRANTY AGAINST MANUFACTURING DEFECTS
Use only adhesives and primers as recommended by the manufacturer.
ENVIRONMENTAL STATEMENT
We are dedicated to complying with today's environmental issues, and have eliminated all heavy metals
such as lead, mercury, cadmium and chromium from our inks and adhesives.
NOTE: The assigned numerical ratings and other tests referenced in this text are not intended to reflect
hazards presented by this or any other material under actual fire conditions.
For more detailed specifications, please call your local representative.

www.VyconWallcovering.com Printed on FSC certified paper 08/2008

You might also like