Professional Documents
Culture Documents
BASIC OF STEP 7
Document Ref: CDSPLTRG_S700E001_100
Version History
Serial Version Highlights Version No Date
1. First release 1.0.0 21/12/2015
Preface
This document is developed for Basic of Step-7 user or learner. Before reading this document
user or learner must have basic knowledge of SIMENS PLC & its architecture. User of this
document should have sufficient knowledge about SIEMES PLC programing and should be
familiar with STEP7 programing software.
The document is prepared in reference to the Siemens standard manuals & literatures and
practical experience. Snap shots used in this manual are taken from real time software Step7 V5.5
+ SP2.
Pictures & screen shots used in this document is from an example project which may vary from
user actual program.
Table of Contents
1. Getting Started
1.1 Creating a project
Step1: Open the STEP-7.
Step2: Go to file and click on NEW to create a new project.
Step3: Enter the name of the project & select the desired location.
2. Hardware Configuration.
2.1 Inserting the Objects.
Step1: First Insert the Rack as required with the reguired MLFB no.
Step2: Insert Power Supply as required with the reguired MLFB no.
Step3: Now Insert the CPU as required with the reguired MLFB no.
Step4: Insert the CP card, Insert the MAC Address & IP Address.
Step5: Click on New to add a Subnet, Select the Ethernet(1) & Press Ok.
Step7: Select DP master address & network speed by (default 1.5 mbps).
Step11: Select the I/O Module as per MLFB no. required, drag and Drop the module.
Step12: Change Analog I/O type click on object properties of analog module. Change type.
Step2: Select the CPU in which you want to download and Press OK.