Professional Documents
Culture Documents
Reference Manual
2018 ver 4.0
Description
Microsoft, Windows are registered trademarks of Microsoft Corporation in the United States
and other countries.
Macintosh, Mac, MacOS are registered trademarks of Apple.inc.
Adobe, PDF, Acrobat PDF is a trademark of Adobe Systems. Inc. Or a registered trademark in
a specific region.
Other services and product names are trademarks or registered trademarks of each company.
Index
-1-
1 About Drill Studio
-2-
2 Installation and start-up
The package version is supported at the time of purchase and you can receive full support
for two years from purchase.
From the third year onwards you can continue to support by upgrading.
The drill studio will always be updated to improve functionality.
Even if you purchase a packaged version, you can obtain the latest version of the update file
via the Internet.
Also, although it is charged, we will send you an update CD-ROM, so please contact us.
-3-
Installation of Drill Studio (for Windows)
Double-click the downloaded file or CD-ROM to open it.
-4-
Now that the installation is ready, press [Install]
please keep on moving.
-5-
Installation of Drill Studio (for MacOS)
Double-click the downloaded file or CD-ROM to open it.
Setup runs.
Please perform setup according to the instructions.
-6-
If the password is correctly entered, it will be installed
automatically.
Please wait until processing is completed.
-7-
3 Set screen resolution and graphics quality
The following screen will be displayed at first startup.
By setting screen resolution and graphics quality you can set speed priority and image
quality priority.
If it is not displayed, and even after the second time, you can display the resolution setting
by doing the following operation.
Windows [ctrl]
holding down this, double-click the drill studio icon to start up.
Mac [option]
Screen resolution
For the list displayed here, the corresponding resolution of your monitor is displayed.
Normally you select the maximum size (same size as the current screen resolution).
If you leave a check in Windowed, you can start up as a window at startup and adjust
the size.
However, the setting at the end will be reproduced at the next startup, so the setting
here will be temporary.
Graphic quality
Rendering frame number, drawing calculation accuracy, etc. are changed based on
this setting.
The more you go to the bottom, the cleaner the drawing, the slower the processing speed.
Normally set it to good or better.
When it works with Fantastic, or when you need to create a large number of contests,
change according to the specifications of the PC and the environment.
-8-
4 Unlock and activate
● Lite version
With only the 2D function, you can not use the part related to 3D
(display of the puppet model, editing by changing the viewpoint, etc.).
You can perform the same operation as in the full version for 2D editing work.
● Full version
All Drill Studio functions can be used.
● Full package
Since we will pay you at the time of purchase, you do not need to purchase a separate key.
(Releasing key issuing procedure required)
Activation
When the key is issued, start the drill studio, select [Help] [Activation], enter your registered
address and activation key, and click [Activation].
If it can be canceled normally, the status in the lower left is displayed as certified.
When activation is completed, close the drill studio and restart it.
Release is successful if all functions become available.
Even if you purchase the packaged version, you will need to issue the activation key.
If there is no online environment and online activation is impossible, fax authentication will be
performed.
-9-
Offline Activation
Click the Offline actibation button and enter all the information.
In that case too, sorry to trouble you, but please send us a request to reset our registration
information to our company.
Key expiration date
The key is available semipermanently, but the major version is valid only in the same drill studio.
2018 Ver. 4 . 1 . 3
メジャーコード メジャー マイナー ビルド
2018 If you purchase the 4.x series, you need to purchase the upgrade key
to use 2019 5.x series.
2018 Support for 4.x series will be until the end of March 2020.
Although it can be continued after that, it will be out of the scope of operation guarantee, so
we recommend you to upgrade every year.
-10-
5 Screen composition and basic usage
Main area
Sub area
Sub sheet
Sheet Count line base
Timeline
Sound waveform Sheet placement base count
-11-
6 Types and roles of tool pallets
Mode tool
It is a tool that you can select member placement,
label placement, line, text, picture mode.
Only objects corresponding to the mode being laundered can
be selected and edited.
Selection tool
It is a set of three selection methods and a set of
lock/unlock buttons, and snap buttons to snap to the grid so
that they can not be selected.
Editing tool
Saving / printing / redoing / restoring /
returning to the presheet position / point check / hold /
is a set of tools.
Scale tool
Hand,/enlargement,/reduction are set,
change the magnification and position of the camera
It is a tool.
-12-
Sheet edit tool
Add Sheet / Make Sub Sheet / Do not Print /
Add Sub Sheet / Register Camera /
It is a useful tool for sheet variants that are set.
Status tool
Information such as the current sheet number and
count number is displayed.
With the ◀ ▶ button, you can move the timeline in units of
sheets, counts, bars..
Playback tool
You can play back, rewind, fast forward, etc.
Mute control of click sound, music and so on, and playback
at 1/2 speed and 3 times speed are also possible.
Special effects
Follows the leader, pinwheel, etc. It is a tool that can set
special motion.
-13-
7 New creation and addition of members
New drill
Select [File]> [New] to initialize the sheet.
Selecting a new drill will initialize all information and will be empty.
If there is an item currently being edited, a confirmation of saving is displayed.
Add members
or [File]> [Add Member] select and set members.
Sets the number of members per part.
Members can add later,
but if you create a lot of sheets,
it will be difficult to add,
so please set as accurate as possible.
Members can not appear from the middle.
Please set it from the beginning and
devise it by arranging it outside the field.
The number of members is not the total
number but sets the number of people to
add to the current members.
The added members will appear aligned for each part from the bottom
left of the field.
Depending on the format of the sheet, some parts appear outside the sheet,
Zoom out to see the created members.
If members already exist in that place, they will appear overlapping.
Colored squares represent the color of the mark.
Click on this square to display the color setting screen and change the color.
You can change the mark color later.
Instruments list
Brass
Trumpet
Melophone
Baritone
Euphonyumu
tuba
trombone
Horn
Euphonyumu
(Shoulder top)
Susaphorn
Woodwind
Clarinet
Bass clarinet
flute
Piccolo
Soprano saxophone
Alto Saxophone
Tenor saxophone
Baritone saxophone
-14-
Battery Percussion
Snare drum
Tenor drum
Bass drums
(1 to 5)
Cymbal line
Glocken
Xylophone * Bass drums can be set up by any number of people.
(If you set more than 5 people, the bass drum will be all the same size after 5th.)
Flag
rifle
Saber
Drum measure
Drum major (baton)
Pit percussion
Stand cymbal Glocken Xylophone Marimba Vibraphone Chime
bath drum Timpani Gong Pit member
Prop
Cubical sphere column
triangular prism
-15-
8 Save · Open file · sound
Save / Save as
or select [File]> [Save] and open the saved dsm file.
From the file browser 2018, it is now possible to open an OS standard browser.
? It has become possible to perform operations such as saving and opening with familiar operation.
The saved file is Drill Studio Motion File (. Dsm).
This data also includes the music data you are using.
Distribution of created dsm file is free, but please be careful about copyright regarding the use
and distribution of data including music files.
Load sound
Select [File]> [Sound reading] and set the sound source.
-16-
9 Create and edit counts
Create count
Create Count
Create only one count at the timeline location.
Count driving
Press this button to play it and the timeline will move to the left. In case
Tap [Space key] according to the count and enter the count.
Add count
Specify the tempo after the last count that is currently present and add the count.
add to
Count split
Split the counts before and after the location of the timeline by the specified number.
8 split
Count equalization
By [real-time input] etc., we will evenly allocate count with variation.
-17-
Measure settings
You can set a measure.
Click the count at the beginning of the measure to align the timeline.
Click this tool button, enter the time signature, the number of measures to set.
If you want to set it to all after it, there is no problem if it is too large.
The count of the head of the bar is displayed in green, and you can let the measure
automatically be calculated.
Split move
You can move all the sheets, counts behind the current timeline position at once.
This function is useful when the song changes and the measure increases or is cut.
You can move it by dragging the red part.
To end the move, right click on the red part or click the tool button again.
When you click the count once, the position of the timeline moves to the location of the
clicked count.
Clicking it again turns red and it becomes selected state.
The selected count can be moved by dragging.
By dragging from [Sheet placement space] as a starting point, it can be enclosed in boxes
and selected collectively.
You can also make multiple selections by holding down the shift key and clicking.
Right click on the count to display the edit menu.
-18-
Right-click on the count context menu
Create a sheet here
Create a new sheet for the clicked count.
For details, please see "Creating Sheet P24".
Measure setting
same effect can be obtained.
Also, you can perform the following operations by right clicking on the
count line base.
-19-
10 Set a title
Title setting
Title + subtitle
designer
Copyright information
-20-
11 Change of sheet design (How to use basic setting)
-21-
How to use basic setting
Sheet background image (for old version file)
This is a function for editing files created with older versions.
To set a new background image, please refer to "Insert image".
Sheet setting
Use standard format
You can use six different sheet formats prepared in advance.
Sheet size
Set the sheet size not to be the actual print paper size, but to fit the 1/100 scale field.
The size unit is millimeter, and the aspect ratio of the number to be set must be 1: √ 2 equivalent
of the paper standard.
When designing on 1/100 scale, print it by enlarging or reducing it to the actual paper size when printing.
The size of the margin also changes according to the sheet size, so set it according to the sheet design
you want to create.
Recommended setting size (mm)
A0 size 1189 × 841 B0 size 1456 × 1030
A1 size 841 × 594 B1 size 1030 × 728
A2 size 594 × 420 B2 size 728 × 515
A3 size 420 × 297 B3 size 515 × 364
A4 size 297 × 210 B4 size 364 × 257
B5 size 257 × 182
Subsheet ABC
If you check here, the sub sheet notation 23-1, 23-2, 23-3 usually can be 23A, 23B, 23C.
grid setting
Height Width
Enter the size you want to create the grid. In consideration of acting outside the field line, specify a size
larger than the field size.
Enter a value converted from 1/100 scale to millimeter unit.
stride length
Specify the stride of one step.
This number is the actual size in centimeters. (Such as 62.5)
offset
You can move the grid you create up, down, left, right from the center with respect to the paper.
Generate grid
Stage scale · stage offset
The value set in the above item is reflected by pressing this button.
You can set the size and display position of the 3D stage (concert hall etc.).
Please change the value according to the sheet format.
-22-
12 Setting and changing the stage
You can switch between sheet display and stage display with the stage tool.
You can set different texts, images, figures in stage mode and sheet mode.
Only the ones created in the sheet mode are reflected in printing.
-23-
13 Creating and editing sheets
Sub sheet
Change selected sheet to sub sheet (or main sheet).
Print lock
Change the selected sheet to the setting not to print.
Although it is possible to set not to print sub sheets, the sheet on which
this button is pressed becomes a sheet not to be printed regardless of
the main / sub sheet. The sheet with this setting is displayed in gray.
-24-
Add and edit sheets
Movement of the sheet can only move between the sheet and the sheet, you can not overtake
the front and rear sheets.
Although you can not move the sheet to a place where there is no count,
if you create a sheet with count and remove the count later, the sheet will remain.
If you move the sheet at this time, you will move to an unexpected place, please be sure to redo
the count and move again.
Remove sheet
remove the selected sheet.
You can also remove it with the Delete key.
Camera set
is the same function.
Remove camera
Delete the registered camera work.
-25-
14 Contest production
Sheet
count
scroll bar
Timeline bar
Count line base
● Double-clicking the count line bar moves the timeline bar to that position.
● Drag the timeline bar to move it.
● When you click a sheet, the timeline bar moves to the position of that sheet.
● If you right click on the count, the timeline bar will move to that count position.
● By moving the scroll bar at the bottom of the screen, you can see the previous sheet
without moving the timeline.
The editing result is reflected in the preview on the sheet of the timeline.
It is designed to show the atmosphere of the current setting at a glance.
Please be aware that if you do not always recognize the sheet being edited,
unintended sheets may be edited.
-26-
15 Select and move members
shape selection
Drag to draw a square, you can select members at once.
The selected order is remembered, but if it is selected at the same time it may be irregular order.
It is a useful tool for simple operations such as movement and rotation.
Additional selection is possible by pressing the [shift] key.
Polygon selection
Click repeatedly to draw a polygon and right click to close the polygon.
You can select members surrounded by that polygon.
It is a useful tool for selecting complex members such as arcs and circles.
As you right-click, it will be selected all at once, so the selection order will be irregular.
If you press the shift key, additional selection is possible.
Drag selection
After dragging, you can select members after tracing with the brush.
Continuous additional selection is possible even if you cancel the click once.
It is a tool specialized to specify order.
It can also be used for deformation selection.
Lock
Lock selected members and objects so that they can not be edited.
unlock
Unlock all locked members and objects.
snap
When the SNAP button is on, the cursor will snap to the point.
You can change the snap system based on the set value.
▲ ▼ works at 0.5 intervals, but if you enter it directly, fine settings such
as 0.25 are possible.
Snap affects all drawing tools.
Enable snapping when arranging lines, arcs, circles etc. accurately.
When snap is on, a red x mark will be displayed near the cursor.
This place becomes the place to click.
The snap interval criterion is always calculated from the center point (0, 0).
Since it is a frequently used function, a shortcut of [control] + G is prepared.
-27-
Move and expand members, rotate
You can move a member by dragging the selected member.
All selected members will move at the same time.
Rotation and enlargement are performed using bounding boxes.
When you select a member, the bounding box is displayed.
Drag the corner arrow to rotate and drag ■ to enlarge.
Rotation and magnification do not rotate or enlarge the mark itself.
The points of the members are rotated relative to each other and expanded.
Therefore, if only one person is selected, expansion and rotation are meaningless.
rotation
scaling
If you rotate, enlarge, move, etc. together, the order of selection is irrelevant so there is
no problem.
-28-
How to use the member position tool
Interval tool
By turning this button on, you can arrange the interval fixedly.
▲ ▼ is set at 0.5 intervals, but if you enter it directly, you can set more detailed values.
“Interval”are reflected only in the line tool and curve tool.
Line arrangement
Set the start point with the first click, the end point with the second click, draw the line,
evenly on the line.
Selected members will be placed.
You can cancel by right clicking before making the second click.
Arc arrangement
Draw the arc that touches the first click point and the second click point,
and decide the arc by the third click.
Selection members are evenly placed on the arc.
You can cancel by right clicking after the first click.
Circle arrangement
Specify the center with the first click, specify the radius with the second click,
and set the member's placement angle with the third click
Designate and draw a circle. Selected members are evenly placed on the circle.
You can cancel by right clicking after the first click.
Mirror arrangement
First, complete half of the figure, make the member order as mirror source, and select.
Next, select the mirror tool and select the member you want to move.
The mirroring is arranged in order with respect to the preselected member.
The mirror algin is reflected on the left and right with a pink line.
Pink lines can be moved by dragging.
Mirroring is not possible, so in that case please make it right and left and rotate.
-29-
Curve placement
By clicking the point and dragging it, I draw a Bezier curve. You can right-click to end the curve.
If you press contol + Z while drawing a curve, you can return the point arrangement one before.
Also, right click to end curves.
Before making decisions, it is possible to select and adjust handles and points.
Equally chosen members will be placed.
By turning on the interval, you can create a curve with a fixed interval.
When drawing a straight line, do not drag and do not put out a handle is a point.
Technique is necessary to draw Bezier line as desired. You can draw beautiful curves
by hitting points at the top, bottom, left and right vertices of the figure to stretch the
handle vividly and vertically.
handle
point
You can draw a straight line by drawing a line with only a click.
The line placement tool can draw only one straight line, but it is useful when you want
to draw a continuous straight line with the curve tool.
It is also possible to draw a box with the curve placement tool by using the snap function
and the interval function or to create regular shapes depending on the ingenuity.
⑨ ⑩
⑦ ⑧
⑥ ⑤
④ ③
① ②
-30-
Accurate placement with alignment tool
Align vertically
Arrange selected members in a vertically.
The front and rear positions are maintained at the first position.
Align horizontally
Arrange selected members in a horizontally.
The left and right positions are maintained at the first position.
Horizontal equal arrangement
Place selected members equally horizontally.
The front and rear positions are maintains the first position.
Alignment tool
Snap is on, it is snapped at the specified point and accurate drawing is possible.
Snap affects all drawing tools.
If you want to arrange lines, arcs, circles, etc. accurately, enable snapping.
Also, because it is a frequently used function, you can enable it with the shortcut [control] + G.
-31-
16 Setting the camera angle
When the 2D button is pressed, it becomes 2D fixed, it becomes the display completely
from directly above with no perspective display.
2D view 3D view
Even from the same angle directly above, the view changes in 2D and 3D.
If both the portrait and landscape are pressed, dragging while right clicking,
You can rotate the camera freely.
Spot tool
Clicking this button allows you to see the current target from directly above.
The target is always on the extended line of the camera, and the distance to
the target changes during camera operation.
You can display it with the target button and check it.
ターゲット
-32-
Top angle
Move to the angle where you saw the entire sheet (whole stage) from directly above
wherever the camera is.
Box angle
Whether the camera is located anywhere, it moves to the angle where the entire sheet
(the whole stage) is viewed diagonally.
Target
Display the camera target. The position of the current target is displayed,
making camera operation easy to understand.
Even if it is displayed, it is not affected by printing, but please note that it will be reflected
on the movie.
target
Scaling view
You can use the zoom tool to control the screen freely.
Hand tool
By pressing this button and dragging the screen you can translate the current
angle as it is.
The same effect can be obtained by clicking inside the mouse button (clicking the wheel).
In the case of Mac, the same effect can be obtained while pressing Command button.
Zoom in tool
Zoom in the current angle as it is.
The same effect can be obtained by moving the mouse wheel.
-33-
17 View objects
Change shiw/hide
View object tool
Models show/hide
Label show/hide
Grid show/hide
Change line color
Previous point show/hide
A line connecting the point of the previous main sheet and the current position
from there is drawn.
show/hide is also reflected in the print result.
-34-
18 Play, stop, fast forward
Status tool
Information on the current sheet number, count, measures, etc.
are always displayed in the status tool.
Sheet number and count are set automatically.
When you set a measure, measures and beats are automatically calculated.
In addition, ◀ ▶ can move the timeline by sheet, count, bar measure.
Playback tool
You can control such as playback and rewind with this tool.
If the sound source is not set correctly
(the waveform is not displayed),it will not play correctly.
If the initial silence tone generator is set correctly, you can play it.
We will expanded the preview line so that counts and sheets can be easily edited.
Normal Expanded
-35-
19 Setting various actions
Horn action
Selectted members for which you want to set the action and select
[Selected]> [Horn Action]. Horn actions can be set for each sheet individually.
Three actions [Horn down / Horn up / Pull up] are applied to the selected member.
The action will be reflected from the previous main sheet to the current sheet.
For example, when you horn up a member in a horn-down state, the bell starts moving from
the start count and the bell completes with an end count.
Thereafter, as long as there is no instruction, the bell-up continues as it is.
With setting 2, you can set two types of actions between one sheet.
Turn setting
Selected members for which you want to set the action and
select [Selected]> [Turn Setting]. Turns can be set for each sheet individually.
-36-
Hold (Holt)
You can selected members and hold the specified member with [Select member]> [Hold].
The same result can be obtained with [control+ H] shortcut.
Normally, members who do not move points also take a mark time.
If you want to hold it, select this menu.
If the member is moving between sheets, it will automatically return
to the point on the previous sheet.
Hold is done between sheets, and detailed setting by beat can not
be done.
If you want to action in the middle of a sheet, you need to create a
sub sheet.
Since the drill studio has a function to calculate measures, even if you move the whole at
double tempo, set the count according to the score and set double time for all members.
-37-
Pause library
You can make various poses.
Select a member and choose [Selected]> [Pause Library].
Action library
You can make various successive actions.
Select a member and choose [Selected]> [Action Library].
-38-
20 Follow The Leader Pinwill
FTL tool
-39-
Auto Follow
With auto follow, you can more easily follow the leader setting.
It is a convenient function for creating outer peripherals such as
RPC · LPC (Pin Feel Center) and various spins.
First, create the first sheet and the next sheet, and create a sub sheets therebetween.
You can quickly create it using the sub sheets creation tool (in the sheet
editing tool).
-40-
Pinwill (PW)
The pinwheel rotates line by line or group by the specified point as the axis.
Subsheet completion
Interpolates the position of the intervening sub-sheet so that it moves linearly from the position
of the previous main sheet to the position of the current sheet.
Follow Follow the leader, pinwheel etc. to create a detailed sub-sheet, use it when moving a member
of another group in a straight line.
→
× ×
×
× × × × ×
-41-
Advanced (outer parade)
Example of creating a paradise parade
You can create outer parade formation using
pinwheel and autoflow.
The outer circumference movement to be created
is as shown on the left.
First, calculate the total number of counts that the entire rotation is completed.
If the interval is 2, it is impossible to rotate in the same interval, so it is necessary to
devise such as to widen the interval and shorten the interval after rotation.
In this case, I will try to put in a container that expands the interval to 4 before the
pinwheel and returns it to 2 after rotation.
The pinwheel shall be 16 counts.
Therefore, until the whole rotation completes and the interval shrinks to 2,
it becomes 36 counts.
Depending on your organization, such calculations may be difficult, so it's a good idea
to take a relatively long count in the meantime, and later adjust the sub sheet to the main
sheet or remove the sheet.
-42-
When the movement in the front row is completed, the sheet that reaches the target
position becomes the last sheet, right click on the sheet, select "Make Main Sheet",
and change to the main sheet.
Since you can not use the auto follow function unless you make it the main sheet,
you must set the main sheet when using auto follow.
In this state, the container is completed, but when you check it in 3D,
the horn or body faces the front.
If you want to move the direction of travel, select the main sheet of completion
of movement, select a member, select tracking from "turn setting" on "Select member"
menu, and specify the total count.
For details, please see "Turn Setting (P36)".
-43-
21 Change member marks and move labels, edit
You can change the color of the mark, the character and size used for the mark.
By checking the item you want to change, you can edit the numerical value of the item.
You can also set the serial number automatically after the mark or label.
Also, with this property, you can make various changes such as the size of the member's model,
hat, texture and so on.
When you change the text of the member mark, the center may be shifted depending on the
type of letters such as symbols.
In order to prevent it, you can fine-tune the offset.
M.H
-44-
Move label position
Depending on the shape of the row, the labels may overlap, making it difficult to see.
In such a case, you can move only the position of the label for each sheet.
By turning on label editing, you can select labels and move them.
The moved label will be reflected on that sheet only.
If you want to reflect on all sheets, please use the offset of label position
by [Properties] of the previous page.
-45-
22 Insert text/graphics/images
You can draw various shapes with the draw line tool.
Every time you click, all the lines are connected and created.
Right click to decide.
Draw the arc through the point of the first click and the second click,
and decide the arc by the third click.
-46-
If you want to remove a shape, right-click the shape and select [Remove].
You can also remove it with the [Delete] key.
If you want to edit the point of a shape, double-click the shape you want to edit.
The point will then be displayed and you will be able to move the point.
However, points created with circles, ellipses, and pens can not be modified.
These lines can be deleted and edited, so you can create original marker lines.
-47-
Insert text
Text tool
Click the text edit mode button to display the text tool.
In text edit mode, there are four different modes, roughly
like lines and images.
-48-
Text Edit and delete
To delete the text box itself, right-click on the text tbox and select .
You can delete it with the [Delete] key.
You can move the text box by dragging.
You can not select or move if it is not in text editing mode.
Also, texts created in all sheet mode can not be selected when not in full sheet mode.
(Single sheet text box can not be selected in all sheet mode)
Seven text boxes created in full sheet mode are created on the default sheet.
-49-
When you try to edit the title in the upper left, it changes like this.
This is called a tag.
Title and subtitle are done with title setting.
That information that is set will be displayed in the place where
this tag was inserted.
When editing is finished, it will be converted automatically.
Subtitle tag[/st]
space
Title tag[/t]
space
Tiltle+
「 」+ Subtitle
Tag list
Sheet number 12 12-2 12-A etc.
When the count number sub sheet is printed, the count from the
previous sheet,
If you do not print sub sheets, count from the previous main sheet.
All counts up to that sheet.
Title set in title setting.
Subtitle set by title setting.
Designer set by title setting.
Copyright information set by title setting.
Measure at the head of the sheet.
The last measure of the sheet.
The number of measures on that sheet.
(It will be counted as one measure even in the middle of a bar.)
The start beat of that sheet.
The beat of the seat.
Composite notation representing the measure of that sheet.
22-24 22 (1-2) 22 (3) -24 (2) and so on.
-50-
Insert an image
Image tool
Click the image edit mode button to display the image tool.
In the image editing mode, as with lines and text, there are
roughly four types of modes.
For the image, create an image box with an appropriate size and set the image there.
Click the original size button and adjust the aspect ratio to the original.
? By holding down [Shift] key while enlarging / reducing, scaling can be done while fixing
the aspect ratio.
-51-
You can change the transparency of the image, make the members easier to see, or insert
them under the grid.
Images can be enlarged / reduced by the bounding box of the four corners that appear
when you select them.
To return to the original image size, press the button of [Original size].
You can fix the ratio by holding down the Shift key and enlarging or reducing it.
Separate images can be set for stage and sheet as well as text and graphics.
By preparing processed images for sheets, you can create sheets that are easy to see
during printing.
-52-
23 Setting the original costume
Change costume
You can set original costumes with [Edit]> [Costume settings].
You can set costumes for each section and change the style of the hat.
You can also change the color of the battery instrument here.
The created costume settings can be saved as a costume file with "save setting file".
Also, you can assign your own costumes by model alone even in
[Selected]> [Properties].
-53-
Texture setting
To create a texture, you need the basics of 3D modeling and the technique of image processing.
To create a texture image, please use image editing software.
The format that can be used is PNG format.
The texture map is published on the drill studio website.
Hat List
Sheiko Hat1
Hat2 Military
-54-
24 Create Prop
Customize Prop
Four kinds of props are prepared, a square, a sphere, a cylinder, and a triangular prism.
You can change the properties of selected members, customize them by changing the texture
and size.
By changing the aspect ratio of the basic model, changing the offset, and combining multiple models,
it is also possible to create complex props.
Also, since it is compatible with transparent PNG as well as model texture, more complicated prop
can be represented by devising texture.
Prop data created will be included in the file and saved.
You can change the scale of the model in the properties of the selected member menu.
The scale can be changed individually, and it can be set up to the decimal point.
By changing the setting, it is also possible to create a springboard, a breakproof, or create a
complicated prop with a combination.
With a texture setting of [Selected member]> [Properties], you can paint with a free
color of a single color by setting your own texture or enabling color.
-55-
Combination of multiple props
If there is no check in the collision process, it will pass through ignoring the prop.
Since collision processing is performed by the physical operation engine,
there is a case that does not ride when playing from the middle or backward returning.
Please try playing from a little before.
By specifying the Z position of [Select member]> [Property], you can set the position of
the member in the Z direction on a sheet basis.
When this setting is made, the movement in the Z direction can be set for each sheet as
well as the movement in the X and Y directions, and it can be floated in the air without the
base such as prop.
As with normal point movements, between sheets, it will complement and move.
However, if conflict handling is checked, physical calculations falling down will be made
even if you are in the air.
-56-
25 Movie export and printing
Export movie
Click the [Printing] button to create a PDF file as a temporary file and open the default PDF viewer.
(Environment to open PDF is necessary)
In the drill studio, the details of printing depend on PDF browsing software for the realization of
multi-platform and stable operation not depending on the environment. It may not open properly
depending on the viewer.
In that case please install separately Adobe Reader and set PDF as a normally open program.
-57-
26 Upload to DSM server
DrillStudioViewer
DrillStudioViewer is a mobile application that can display drill studio files on smartphones and
tablets.
You can download it on the application distribution site (Google Play or the App Store).
Container can be confirmed in real time, the story created by drill studio is reproduced faithfully
as it is, so it is useful for grasping details of individual movement, image training and everyday
practice.
Files uploaded to the Dsm server can be downloaded to the application simply by sharing the file
name and password.
File management
-58-
27 Convenient function and shortcut list
useful function
Copy & Paste [Edit]> [Copy / Paste]
You can record the position of members in order of selection and reflect them on another sheet.
You can copy and paste text boxes, lines, etc. (pasted in the same position)
-59-
24-5 Suzaku syokaicho simogyo-ku Kyoto city Japan
mail : aucs.creat@gmail.com
Publisher web : http://aics.main.jp
First edition issued on March 20, 2018 March 20 th, 2018 First sale