Professional Documents
Culture Documents
BERUDRAW AL 20
Non water miscible wire drawing oil
9795002
Rev.02_24.09.2007
Description
When starting the machine after recharging with fresh oil it is advisable • Multipurpose
to increase the drawing speed slowly. When reaching a temperature of
40°C the drawing can be done with standard speed.
Due to the high lubricity long lifetime of dies and a low formation of alu-
minium particles can be reached. By this BERUDRAW AL 20 can be
used – depending on the tons of drawn wire – up to various years with-
out any change.
BERUDRAW AL 20 can be used from rod breakdown applications
down to final diameters of 0,5 mm.