Professional Documents
Culture Documents
CSS PDF
CSS PDF
2. Press F12 for Toshiba Laptops and Fujitsu Desktops then choose the
bootable device you used, and F2 for NEC, then click Boot, then click 1st boot,
then choose the bootable device you used, then press F10 to save and restart.
3. Choose the correct Operating System.
8. Multiply those numbers by .50 (e.g. 152626 .50 = 76,313), delete the
152626 and type 76,313 then click APPLY.
9. Click NEW again then multiply 152626 to .30, type the answer then click
APPLY.
10. For the remaining 20%, leave it unallocated because as what your assessor
says, it must be hidden.
11. After partitioning, don’t forget to click the partition you made first (50%)
because the OS will be installed here, then click NEXT.
13. If you see “Restart in 10 seconds”, quickly remove the device you used to
install the OS.
B. Installation of Applications
1. Install the given applications.
*Have your presence of mind. Only install the applications the assessor told
you.*
Example :
* For the SERVER
-your assessor told you to install DRIVERS, MS OFFICE – WORD & ACCESS,
BROWSER AND ANTI-VIRUS. Be familiarized to your flashdrive so you can
easily locate the applications.
a. Install first the drivers.
b. Open MS OFFICE in your flashdrive then click CUSTOMIZE. Take note that
you only have to install MICROSOFT WORD and MICROSOFT ACCESS.
c. Install BROWSER.
d. Install ANTIVIRUS.
2. PATCH PANEL
A. B.
WBl Bl WG G WO O WBr Br WBl Bl WO O WG G WBr Br
1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8
3. MODULAR BOX
A. B.
PORT PORT
1 WG Br 8 1 WO Br 8
2 G WBr 7 2 O WBr 7
3 WO O 6 3 WG G 6
4 Bl WBl 5 4 Bl WBl 5
SAMPLE DIAGRAM
HUB
PROCEDURES:
1. Reset Router (Long Press the BLACK BUTTON)
2. Go to Browser and enter the Default IP Address of the Router
(192.168.0.1)
3. Log-in as admin. The Default username is admin and the Default password
is admin.
4. Change Router name.
-Go to “Wireless”, change the wireless network name then SAVE.
5. Change Router Password.
-Under “Wireless”, go to “Wireless Security” and change the Wireless
Password to “12345678910” as given.
6. Change Router’s IP Address.
-Go to “Network”, click “LAN” then change IP Address to 192.168.4.1 as
given.
7. Change Server’s IP Address.
- Open “Network and Sharing Center” then Click “Change Adapter
Settings”. Select and right click “Local Area Network”, click “Properties”,
double click the “IPv4”, click “Use the following IP address”, then change the
IP Address to 192.168.4.2 as given then click the Subnet Mask, ok, ok.
8. Change Client’s IP Address.
-Go to Client, and do the same thing as what you did in the server and change
the Client’s IP Address to 192.168.4.3 as given.
9. Turn off firewall.
- Click “Start”, type “fire” and click “windows firewall”. Click “Turn off
firewall on or off” and then click “Turn off firewall…”, close.
10. Check if there are connections between the Router, Server and the Client.
-Go to the Server, Press Windows+R, type “ping 192.168.4.1 –t” to check the
network connection of the router
-type “ping 192.168.4.2 –t” to check the network connection of server
-type “ping 192.168.4.3 –t” to check the network connection of the client
*Do this also to the Client.*
COC 3
Set-up Computer Servers
Example Test Package:
1. Active Directory Domain Services (ADDS)
2. DNS – pcst.edu (may vary)
3. DHCP – Scopename: Any Name
Start IP Address: 192.168.3.1
End IP Address: 192.168.3.10
4. Organizational Unit and Folder Redirection
Users: User1 and PC1 Password: Tesda123
Folder Redirection: Desktop and Documents
5. REMOTE DESKTOP
6. PRINTER DEPLOYMENT
Printer: Epson LX-300+
7. Joining Client in Domain
INITIAL CONFIGURATION:
1. Disable DHCP
a. Enter Router using the Browser and type the IP Address of Router you put in
COC 2.
b.Click DHCP.
*For the Router having the Green background, Click “disable”, remove the
Start IP Address, End IP Address and the Default Gateway and SAVE. After
saving, click “CLICK HERE” and then “REBOOT”.
*For the Router having the Sky Blue background, just click “disable” and
SAVE.
7. Obtain Client
- Open “Network and Sharing Center” then Click “Change Adapter
Settings”. Select and right click “Local Area Network”, click “Properties”,
double click the “IPv4”, Select Obtain an IP address automatically and
Obtain DNS server address automatically, then ok, ok.
COC 3:
1. Active Directory Domain Services (ADDS)
-Click START, type “oobe”, click “add roles”, click next, click Active Directory
Domain Services, click next, click “Add required…”, next, next, then click
“INSTALL”.
*FOLDER REDIRECTION
-Click START, click Administrative tools and click Group Policy
Management. Expand Forest, expand Domain, expand created Domain (e.g.
“pcst.edu”), right click created OU (e.g. “CSS”) then click “Create GPO..”, then
type anything. Right click the created GPO and click Edit. Expand User
Configuration, Expand Policies, expand windows settings, click Folder
Redirection, right click DESKTOP (as given), click Properties, change “not
configured..’ to “BASIC…” then copy the Network Path of your shared
folder (e.g. “\\server\css”). (Go to your shared Folder, then Right Click, then
click Properties, then click Sharing then copy the Network Path of your
shared folder) and then paste in the Root Path. Do the same thing for the
DOCUMENTS.
5. REMOTE DESKTOP
-Go to START, > Administrative Tools, Right click Remote Desktop Services,
click Remote Desktop Session Host Configuration, click “Restrict each
user…”, double click that then uncheck “Restrict…”, ok.
6. PRINTER DEPLOYMENT
-Click Start, type “oobe”, click add roles, next, select Print & Document
Services, next---, Install then close.
-click START, then Administrative Tools, click Print Management, Expand
Print Servers, expand Server Local, click Printers, right click anywhere in the
table and click “Add printer”, click “Add a new printer”, next-, click (e.g.
“Epson”) then find (e.g. “Epson Lx-300+”), next, install, then finish. Right
click the added Printer, click “Deploy with Group Policy”, browse, click the
created GPO (e.g. “CSS.PCST.edu”) then click (e.g. “CSS”), check the two
boxes, click add, apply, ok--.
7. JOINING OF CLIENT TO DOMAIN
-Go to Client, Click START, Right click Computer and click Properties, click
change settings, click change, type the Domain, click ok, then type
Administrator and then type the Password of the Server. Click ok, then
restart. After restarting click Switch user, then other user, then login as (e.g
“user1”), then type the password (e.g. “Tesda123).
CHECKING:
1. FOLDER REDIRECTION
-After logging in the user created (eg.user1). Create any file on the desktop
then Go to Server, go to your shared folder and there should be a automatic
folder named user1, then Click Desktop, click continue, click “security tab”,
click continue, click Administrator, ok,ok,ok. If your created file on the
desktop of the user is there then FOLDER REDIRECTION is correct.
2. PRINTER DEPLOYMENT
-Go to client, click START, click Devices and Printers. If the printer you
deployed is there then PRINTER DEPLOYMENT is correct.
ADDITIONAL TASKS
1. REMOTE APP
-Go to Start, type “oobe”, add roles, click next, click “Remote Desktop
Services”, next---, then select first box, install, select second box, click “add
required…”, check “Core Services”, check “Remote Desktop Licensing”,
next, click “Require…”, next, click Per Device, next----, Install, close, no, then
Restart.
*To check the Remoted App:
-Start > Administrative Tools, Right click Remote Desktop Services, click
Remote App Manager, Right click the lower portion (table), click “Add
Remote App Programs”, next, click “everything”, next, finish, select and
right click the program, click create “.rdp file”, next, browse, expand Drive
C, Go to Local Disk D, Go to User1, Go to Desktop, then click OK, next, and
Finish.
2. Exclusion
-Start > Administrative Tools, click DHCP, expand “pcst.edu”, expand “IPv4”,
expand scope, click “Address Pool”, right click the “New…”, type the Start
and End IP Addresses given by your assessor. Then go to Client and check if
it received the correct IP Address.
3. Remote Desktop Vice Versa
-Right Click COMPUTER, click Remote Settings, click “allow..”, OK, click
Remote Desktop, OK then switch account.
COC 4
Maintain and Repair Computer Systems and
Networks
1. Release Client on Domain
-Click Start, right click Computer, click Properties, click Change Settings,
Login as Administrator and type Password of the Server, OK, click Change,
Click Workgroup and type “WORKGROUP”, OK, OK, Restart.
4. Format Drive D
-Go to Computer, right click DRIVE D, Format then click start.