Professional Documents
Culture Documents
For you to able to disassemble and assemble the computer unit identify first the
materials, tools and equipment that you use before you start
You have to follow the “Occupational health and safety” or OHS to ensure your own
safety
Now that you are ready, you are now able to start disassemble the computer unit
PROCEDURES
1. Unplug the unit.
2. Remove the system unit case.
3. Remove the power supply connectors.
4. Remove the front panel connectors.
5. Remove hard drive
6. Remove the CD/DVD ROM.
7. Remove the power supply unit.
8. Remove the mother board
Now that you are done to disassembly the system unit, assemble it with no errors.
Command prompt
1. Run command prompt as admin.
2. Type disk part.
3. Type list disk.
4. Select disk.
5. Type clean.
6. Type create partition primary
7. Type format fs=ntfs quick
8. Assign name
9. Copy the content from ISO file
Rufus applications
1. Click the rufus app.
2. Click the ISO image then find the ISO file operating system.
3. Click start
4. Click ready
SET ROUTER/WI-FI/WIRELESS
ACCESSPOINT/REPEATER CONFIGURATION
In order to configure router, following procedures are set:
1. Connect router to Pc using straight cable.
2. Identify router’s IP address.
3. Type the IP address on browser bar.
4. Enter router’s default username and password.
5. Select wireless tab.
6. Set your desire SSID WI-FI name.
7. Set your desire WI-FI password
8. Click Save.
9. Disable DHCP server.
10. Reboot router
The following are the procedures to configure windows server 2008 r2.
1. Configure the network.
2. Click windows button then type “dcpromo”and enter.
3. Check use advance.
4. Click next.
5. Click next.
6. Click “Create new domain” then next.
7. Type name local then click next (E.g. ancel.local)
8. Set the functional level.
9. Click next.
10. Check DNS server then click yes.
11. Click next.
12. Type your password then next.
13. Check reboot on completion then wait until the PC will restart
14. Click ctrl + alt + del to log in.