Professional Documents
Culture Documents
Stock valves provide reliable service in even the most demanding material feed systems. Different types of valves are
available for a variety of systems and locations. They provide the proper form of closure necessary to suit the system.
Different options and features allow Stock valves to function under diverse conditions. Valves are sized to meet the
requirements of the system.
The process diagram to the right demonstrates the wide range of capabilities Stock valves can provide throughout any
type of material handling system.
To Material Storage
2 6
1 9
7
To Crusher 10
3
dryer Pile
Material dryer
Material Storage
Fuel Intake (Outside) (Inside)
5
8
11
13
Crusher
12
Gravimetric Gravimetric Gravimetric A multitude of options are available to ensure that the
15 High Low Batch
Pressure Pressure Scales valve you choose will provide superior performance
Feeder Feeder throughout your system. These options allow us to
16
design a valve that will meet your specific system require-
ments.
dryer
Pulverizer CFB Stoker
Consult your local Stock sales representative in order to
determine which features and options are available for
17
the valve that is most suitable for your system.
Bulk Material Valve Air Coal Valve Track Hopper and Yard Valve
Reclaim Valve
Stock Bulk Material Valves are pri- The Stock AIr Coal Valve, has Stock Yard Valves are intend-
marily used for positive shut-off at a rack and pinion design. It is Stock Track Hopper and ed for use in the coal yard or
the outlet of a bin, silo, or bunker. very similar to the bulk mate- Reclaim Valves are self- in other areas where system
The self-cleaning rack and pinion rial valve, but there are a few cleaning rack and pinion isolation is necessary. The
design makes this valve extreme- subtle differences. The valve is valves primarily used for valve is of rugged design,
ly suitable for most bulk material constructed to meet National hopper shut-off in coal manufactured with heavy-
applications where positive shut- Fire Protection Agency (NFPA) yards below a track hop- duty structural shapes. The
off is required through a standing Code and will withstand a 50 per or reclaim hopper. Yard Valve is strictly for use
column of material. The gate oper- psi explosion. This is a require- These valves shut off the where dust is not a factor
ating shaft is located above the ment associated with the coal flow from the hop- due to the absence of dust
gate rack, keeping bearings, rollers, valve’s application. The valve pers to coal handling covers and other accesso-
and the pinion shaft out of active is used as a means of isola- conveyors below. They ries that would make it dust
material stream. Two ¼ inch deep tion below a feeder. It provides have all the desirable tight. The smaller size of
root pinions are welded on each positive shut-off to minimize features of bulk mate- this valve makes it ideal for
side of the pinion shaft. These pin- hot gas and dust entry up into rial valves, but are of empty system isolation situ-
ions drive through the gate ladder the feeder during maintenance. a lower profile design. ations where space restric-
rack, providing self-cleaning opera- This is accomplished by means Heavy duty construction tions are a factor.
tion. Any material accumulating on of a precision machined gate allows this valve to han-
top of the gate rack will be crushed and inlet surface. The gate is dle larger size materials
and passed through the rack, elimi- supported by adjustable slide and the harsh environ-
nating the possibility of gate bind- bars which allow a tight clear- ment associated with
ing due to material accumulation ance between the gate and inlet the coal yard.
on the gate rack. collar.
Valve Designs for Knife Gate
Other Applications: Style Valve:
Clam Shell Valve Blade Diverter Valve Non-Jamming Gate Valve Knife Gate Valve
Stock Clam Shell Valves are Stock Blade Diverter Valves are Stock Non-Jamming Gate Stock Knife Gate Valves are a
used for simple load out sys- used to divert the flow of fast Valves can be used for batch- utility-type gate that can be used
tems where a fast acting, moving materials from one ing operations, and where for a number of applications.
open/close valve is required direction to another. A number flow regulation is of primary Because of their tight shut-off
to handle aggregate, sand, of styles and configurations concern. Depending on the capabilities, they are virtually
cement, and/or grain. With the are available to suit the desired style selected, these valves mandatory for isolation in the
proper actuators, safety devic- flow path. A design variation are ideal as diverter valves burner line between a pulverizer
es, and controls, this valve called the Swinging Hopper and are designed to operate and burner. They are also suit-
will provide an excellent truck Diverter Valve can move a in a partially opened position. able for feeder discharge isola-
loading device. Clam shell static column of material from They have a distinct advan- tion, shut-off at the outlet of a
valves are available in two one direction to another. This tage over the traditional fly ash hopper, or for processes
configurations. The simplex unique design will prevent an diverter gate in that they are where high temperatures and/or
is a single-moving gate, and entire system from shut down designed to operate through high pressures up to 50 psi are
the duplex is a double-mov- due to one leg of the splitter a column of material. experienced.
ing gate. They can be used being plugged.
for a variety of applications,
from truck load out systems
to merely cutting off material
flow in a silo, bin, or bunker
outlet.
Stock® Valves
Choosing the appropriate valve for superior system performance.
Where sound engineering, rugged construction, and ease of maintenance are important, Stock Valves have become indus-
try standards for bulk handling applications. Stock Valves are designed to meet the specific needs of your system. There
are five important factors that must be considered when selecting the appropriate valve for your system: sizing, frequency
of operation, internal pressure, valve actuation and type of bulk material.
Important considerations for choosing the appropriate valve:
Stock Equipment Company develops, manufactures and markets a full range of solutions, products and systems on the basis of combining
process engineering expertise, reliable components and field-proven technology.
© by Stock Equipment Company, 2007