Professional Documents
Culture Documents
53
www.hilti.ca
Company: Page: 1
Address: Specifier:
Phone I Fax: | E-Mail:
Design: Anchors for Westeel bins 09-10-11 Dec 19, 2019 Co Date: 2019-12-27
Fastening point:
Specifier's comments:
1 Input data
Anchor type and diameter: HIT-HY 200 + HAS-E 3/4
Return period (service life in years): 50
Item number: 385432 HAS 5.8 3/4"x10" (element) / 2022793
HIT-HY 200-R (adhesive)
Effective embedment depth: hef,act = 200.0 mm (hef,limit = - mm)
Material: 5.8
Evaluation Service Report: ESR-3187
Issued I Valid: -|-
Proof: Design Method CSA A23.3-14 / Chem
Stand-off installation: eb = 0.0 mm (no stand-off); t = 25.0 mm
Anchor plate :
R lx x ly x t = 406.0 mm x 406.0 mm x 25.0 mm; (Recommended plate thickness: not calculated)
Application also possible with HVU2 + HAS 3/4 under the selected boundary conditions.
More information in section Alternative fastening data of this report.
R
- The anchor calculation is based on a rigid anchor plate assumption.
Input data and results must be checked for conformity with the existing conditions and for plausibility!
PROFIS Engineering ( c ) 2003-2019 Hilti AG, FL-9494 Schaan Hilti is a registered Trademark of Hilti AG, Schaan
1
Hilti PROFIS Engineering 3.0.53
www.hilti.ca
Company: Page: 2
Address: Specifier:
Phone I Fax: | E-Mail:
Design: Anchors for Westeel bins 09-10-11 Dec 19, 2019 Co Date: 2019-12-27
Fastening point:
Input data and results must be checked for conformity with the existing conditions and for plausibility!
PROFIS Engineering ( c ) 2003-2019 Hilti AG, FL-9494 Schaan Hilti is a registered Trademark of Hilti AG, Schaan
2
Hilti PROFIS Engineering 3.0.53
www.hilti.ca
Company: Page: 3
Address: Specifier:
Phone I Fax: | E-Mail:
Design: Anchors for Westeel bins 09-10-11 Dec 19, 2019 Co Date: 2019-12-27
Fastening point:
3 Warnings
• Please consider all details and hints/warnings given in the detailed report!
Input data and results must be checked for conformity with the existing conditions and for plausibility!
PROFIS Engineering ( c ) 2003-2019 Hilti AG, FL-9494 Schaan Hilti is a registered Trademark of Hilti AG, Schaan
3
Hilti PROFIS Engineering 3.0.53
www.hilti.ca
Company: Page: 4
Address: Specifier:
Phone I Fax: | E-Mail:
Design: Anchors for Westeel bins 09-10-11 Dec 19, 2019 Co Date: 2019-12-27
Fastening point:
4 Alternative fastening
4.1 Alternative fastening data
Anchor plate :
R lx x ly x t = 406.0 mm x 406.0 mm x 25.0 mm; (Recommended plate thickness: not calculated)
Input data and results must be checked for conformity with the existing conditions and for plausibility!
PROFIS Engineering ( c ) 2003-2019 Hilti AG, FL-9494 Schaan Hilti is a registered Trademark of Hilti AG, Schaan
4
Hilti PROFIS Engineering 3.0.53
www.hilti.ca
Company: Page: 5
Address: Specifier:
Phone I Fax: | E-Mail:
Design: Anchors for Westeel bins 09-10-11 Dec 19, 2019 Co Date: 2019-12-27
Fastening point:
Input data and results must be checked for conformity with the existing conditions and for plausibility!
PROFIS Engineering ( c ) 2003-2019 Hilti AG, FL-9494 Schaan Hilti is a registered Trademark of Hilti AG, Schaan