Professional Documents
Culture Documents
Comware version 7
(1) .ipe file → One .ipe file contains Firmware (bin) and Bootrom (btm) files.
Prepare
(1) The version of firmware file to be updated.
(2) FTP server for downloading the firmware file to the switch.
(3) Place the firmware file in the appropriate path of the FTP server.
Update procedure
1. Check the current Firmware version
Check the firmware version currently being loaded in the switch.
<H3C> disply version
Check free space in the flash memory of the IRF configuration Slave switch.
<H3C> dir / all slot 2 # flash: /
If there is no free space to copy a new firmware file, delete the unused old file and upload a new firmware
file.
Comware version 5
<H3C> ftp 192.168.0.1
ftp> dir
ftp> get A 5120 EI - CMW 520 - R 2215. bin
ftp> get A 5120 EI - BTM - 610. btm
ftp> quit
Comware version 7
<H3C> ftp 192.168.0.1
ftp> dir
ftp> get 5510 HI - CMW 710 - R <b> 1309 P 03. ipe
ftp> quit
Old procedures?
<H3C> Copy flash:/A5120EI-BTM-610.btm slot2#flash:/A5120EI-BTM-610.btm
<H3C> Copy flash:/A5120EI-CMW520-R2215.bin slot2#flash:/A5120EI-CMW520-R2215.bin
Comware version 7
<H3C> boot-loader file flash: /5510HI-CMW710-R1309P03.ipe all main
Old procedures?
BootRom version upgrade
<H3C> bootrom update file A5120 EI - BTM - 610.btm slot 1
<H3C> bootrom update file A5120 EI - BTM - 610.btm slot 2
In some cases it is contained in a. bin file, so specify a .bin file in that case.
9. Remove the previous version firmware file from the switch's flash memory
Check the flash memory of the IRF configuration Master switch.
<H3C> dir / all
Note
When working with a serial cable, you can use XMODEM instead of FTP.
<H3C> xmodem get
2. Check
<H3C> display boot-loader
Software images on slot 2:
Current software images:
flash:/5900_5920-cmw710-boot-r2418p06.bin
flash:/5900_5920-cmw710-system-r2418p06.bin
flash:/5900_5920-cmw710-packet-capture-r2418p06.bin
Main startup software images:
flash:/5900_5920-cmw710-boot-r2418p06.bin
flash:/5900_5920-cmw710-system-r2418p06.bin
Backup startup software images:
None
This command will set the backup startup software images. Continue? [Y/N]:Y
Verifying the file flash:/5900_5920-cmw710-packet-capture-r2418p06.bin on slot 1...........Done.
Verifying the file flash:/5900_5920-cmw710-boot-r2418p06.bin on slot 1..........Done.
Verifying the file flash:/5900_5920-cmw710-system-r2418p06.bin on slot
1...................................................Done.
The images that have passed all examinations will be used as the backup startup software images at the
next reboot on slot 1.
flash:/5900_5920-cmw710-packet-capture-r2418p06.bin