Professional Documents
Culture Documents
asp
[Print Page]
Application(s):
Category(ies): Conversion , Storage, Handling, Fuel Cell, Electrolyzer, Generation
Available now
Warranty: yes
H2000 PLUS Hydrogen Leak Detector is the ultimate tool for leak detection and leak locating using diluted hydrogen as tracer
gas. It finds leaks down to 5x10E-7 mbarl/s and is available in the desktop, panel and battery operated model.
Application(s):
Category(ies): Fuel Cell
Available now
Warranty: yes
The challenge for the hydrogen economy has always been production and storage of hydrogen cheaply. AllH2, Inc. has
overcome these by moving hydrogen in a solid cell and releasing it on demand by our patented fuel cell and hydrogen vessel
system. If you need cheap hydrogen we can produce it.
PM1000
American Superconductor
Application(s): Light duty , Light duty - automotive, Heavy duty, Stationary, Backup, Auxiliary, Storage, Component, Fueling
Category(ies): Conversion
Available now
Price: $Varies
Warranty: yes
Input(s):
1 of 33 10/10/2009 3:01 AM
National Hydrogen Association http://www.hydrogenassociation.org/general/productsDetails_all.asp
PM1000
American Superconductor (AMSC)
Application(s): Light duty , Light duty - automotive, Heavy duty, Stationary, Backup, Auxiliary, Storage, Component, Fueling
Category(ies): Conversion
Available now
Price: $Varies
Warranty: yes
Height: Varies
Width: Varies
Depth: Varies
Input(s):
Application(s): Component
Category(ies): Sensors
Available: /
The AppliedSensor HSS-440 Hydrogen Safety Sensor is a highly selective, fast-responding sensor that enables the safe use of
hydrogen gas. Based on advancements in Field Effect (FE) technology, the HSS-440 Hydrogen Safety Sensor offers reduced
power consumption and increased packaging flexibility.
Hydrofiller
Avalence
Visit Website
Application(s): Light duty , Light duty - automotive, Heavy duty, Stationary, Backup,
Auxiliary, Fueling
Category(ies): Electrolyzer, Generation
Available now
Price: $$95k-$315k
Warranty: yes
2 of 33 10/10/2009 3:01 AM
National Hydrogen Association http://www.hydrogenassociation.org/general/productsDetails_all.asp
Height: 96 inches
Width: 54 inches
Depth: 60 inches
Input(s): Electricity, Water,
Input range: 25 kW min. - 1.5 kW max.
Output type: hydrogen
Output amount: 1-10 kg/day
Voltage pressure: 6,500 psi
Efficiency: > 70% LHV < 60 kWh/kg hydrogen
Maintenance: 6 month cycles
Runtime: 10-15 years
Ballard Power Systems offers an air-cooled, scalable proton exchange membrane (PEM)
42-cell fuel cell stack suitable to a wide range of light duty applications where durability,
reliability and a simplified balance of plant are key requirements.
The Mark 1020 ACS has been engineered to incorporate advanced open cathode technology and state of the art self-humidifying
membrane electrode assemblies (MEAs). These features completely eliminate the need for humidification systems and simplify
system integration. The result is a simple, low cost design delivering reliable operation over a wide range of challenging
conditions.
With no moving parts and high efficiency, the Mark 1020 ACS stack produces clean DC power with a low thermal and acoustic
signature. The Mark 1020 ACS stack can be scaled to meet power requirements from 300W to 5kW and integrated into motive
or stationary power applications.
Mark 1020 ACS prototype stacks are available now to customers with fuel cell stack integration capabilities for applications
evaluation.
Height: 28 centimeters
Width: 40.5 centimeters
Depth: 11.2 centimeters
Input(s): Gaseous
Output type: electricity
Output amount: 1.26 kW
Voltage pressure: 24 – 30
Runtime: 4000 hours
Mark 1030
Ballard Power Systems Inc.
Visit Website
Application(s): Stationary
Category(ies): Fuel Cell
Available now
3 of 33 10/10/2009 3:01 AM
National Hydrogen Association http://www.hydrogenassociation.org/general/productsDetails_all.asp
Ballard Power Systems proudly offers a proton exchange membrane (PEM) fuel cell stack
designed to meet the market demand for a reformate-based, long life, and high efficiency fuel cell stack.
Available now to customers with fuel cell stack integration capabilities, the Mark 1030 stack are designed for integration into
systems for the residential cogeneration market.
The liquid cooled Mark 1030 stack provides secure electrical power to a system throughout its operating range. In addition to
the stack, a cell voltage monitoring harness is provided that can connect directly to the customer’s monitoring system. With
years of development and field-testing experience in the Japanese residential cogeneration market, Ballard’s Mark 1030 stack
offers reliable and long life durability to the system integrator.
Ballard Power Systems also offers application engineering support to ensure lifetime and performance is maximized through the
system development.
Mark 9 SSL
Ballard Power Systems Inc.
Visit Website
Ballard Power Systems offers a proton exchange membrane (PEM) fuel cell stack based on our proven, fourth generation, Mark
902 transportation stack technology. Available now to customers with fuel cell stack integration capabilities, the Mark9 SSL is
designed to perform in rugged conditions and is available in a scalable series depending upon customer requirements.
The Mark9 SSL can be configured for motive or stationary power applications. Stacks are available in power increments from 4
kilowatts to 21 kilowatts.
The Mark9 SSL provides stable electrical power to a system over a wide range of operating and environmental conditions. A
liquid cooled, hydrogen-fueled product, the Mark9 SSL uses Ballard’s off-the-shelf fuel cell components.
Height: 6 centimeters
Width: 76 centimeters
Depth: 10.8 to 32.6 centimeters
Input(s): Liquid
Output type: electricity
Output amount: 4 - 12 kW
Mark 902
Ballard Power Systems Inc.
Visit Website
4 of 33 10/10/2009 3:01 AM
National Hydrogen Association http://www.hydrogenassociation.org/general/productsDetails_all.asp
With the Ballard® fuel cell at its core, the MK 902 power module establishes a new standard of performance by optimizing cost,
design for volume-manufacturing, reliability, power density and compatibility with customer system requirements.
With a continuous maximum power output of 85 kilowatts, the MK 902 power module features unique Ballard-designed flexible
graphite flow field plates, which offer excellent electrical and thermal conductivity. The MK 902 power module also features an
integrated cell voltage monitor and control unit that can interface with a system controller. In addition, the module can operate
in sub-zero environmental temperatures using an ethylene-glycol-based coolant. The MK 902 power module’s fuel cell design
can be scaled to meet other power requirements and has been designed with an overall approach that considers core materials,
volume-manufacturing processes and stack performance in the context of a total fuel cell engine, optimizing performance and
integration.
Height: 25 centimeters
Width: 37.5 centimeters
Depth: 80.5 centimeters
Input(s): Gaseous
Output type: electricity
Output amount: 85 kW
Voltage pressure: 284
Ballard Power Systems introduces the Nexa® power module, the world’s first volume-produced proton exchange membrane
(PEM) fuel cell module designed for integration into a wide variety of stationary and portable power generation applications.
Using Ballard’s PEM technology, the Nexa® power module converts hydrogen fuel and oxygen (from air) in a non-combustive
electrochemical reaction to generate up to 1200 watts of unregulated DC electrical power.
Emitting heat and water as by-products of power generation, the Nexa® power module allows original equipment manufacturer
products to be used in indoor environments and other locations not possible with conventional internal combustion engines. The
Nexa® power module’s quiet operation and compact size make it ideal for integration into uninterruptible power supply
systems, emergency power generators, and recreational and portable products. And unlike battery technology with limited
run-times, the Nexa® power module is capable of providing full extended run backup or intermittent electrical power for as
long as fuel is supplied to the unit.
Height: 33 centimeters
Width: 25 centimeters
Depth: 56 centimeters
Input(s): Gaseous
Input range: 10 PSIG min. - 250 PSIG max.
Output type: electricity
Output amount: 1200w
Voltage pressure: 22 to 50
Runtime: 1500 hours
5 of 33 10/10/2009 3:01 AM
National Hydrogen Association http://www.hydrogenassociation.org/general/productsDetails_all.asp
With the Ballard fuel cell at its core, the heavy-duty power module establishes a new standard of performance by optimizing
cost, design for volume-manufacturing, reliability, power density and compatibility with customer system requirements. The
heavy-duty power module features a control unit that can interface with a system controller, making integration easy for any
fuel cell or hybrid fuel cell bus platform. The next generation module offers higher durability, power density and efficiency.
Height: 17 inches
Width: 34 inches
Depth: 49 inches
Input(s): Gaseous
Output type: electricity
Output amount: 65 - 130 kW
Voltage pressure: 400/800
HFI products are on-board hydrogen electrolyzers that take power from the alternator, split water and inject the gases directly
into the air intake of the engine. In use on light and heavy trucks, buses, military vehicles and ambulances, HFI represents a
bridge technology that makes existing diesel and gasoline engines operate more efficiently and with significantly lower
emissions.
Input(s): Water
Output type: Hydrogen and Oxygen
Output amount: 1.1 L/minute
Efficiency: 57
Maintenance: Add distilled water
Runtime: ~ 65 Hours
Application(s): Light duty , Light duty - automotive, Heavy duty, Stationary, Backup, Storage, Component
Category(ies): Service
Available now
Warranty: yes
6 of 33 10/10/2009 3:01 AM
National Hydrogen Association http://www.hydrogenassociation.org/general/productsDetails_all.asp
Cylinders in other dimensions & in 450/700 bar are available upon request
Application(s): Light duty , Light duty - automotive, Heavy duty, Stationary, Backup, Storage, Component
Category(ies): Service
Available: /
350 bar cylinders (type 3 - aluminum liner with carbon fiber overwrap): M039 (11.7x35.7") - 51 lb - 0.94 kg H2 / V074
(15.6x35.4") - 79 lb - 1.79 kg H2 / W205 (16.4x83.1") - 198 lb - 4.96 kg H2 / ZM180 (23.7x38.3") - 205 lb - 4.36 kg H2 /
Cylinders in other dimensions & in 450/700 bar are available upon request.
Input(s): Gaseous
Runtime: 15 years
7 of 33 10/10/2009 3:01 AM
National Hydrogen Association http://www.hydrogenassociation.org/general/productsDetails_all.asp
Application(s): Component
Category(ies): Service
Available now
Warranty: yes
Height: 20 centimeters
Width: 10 centimeters
Depth: 45 centimeters
Input(s): Gaseous
Output type: electricity
Voltage pressure: 24 - 45
Efficiency: 47
Runtime: , n/a
8 of 33 10/10/2009 3:01 AM
National Hydrogen Association http://www.hydrogenassociation.org/general/productsDetails_all.asp
Input(s): Gaseous
Output type: electricity
HGM-10,000
H2Gen Innovations, Inc.
Visit Website
Application(s): Fueling
Category(ies): Generation
Available now
Warranty: yes
The HGM-10,000 produces 10,000 scfh of pure hydrogen by converting natural gas to hydrogen on-site at the customer's
facility or fueling site. The HGM-10,000 includes a built-in PSA gas cleanup system, producing up to 99.999% pure hydrogen
suitable for a PEM fuel cell.
HGM-2000
H2Gen Innovations, Inc.
Visit Website
Application(s): Fueling
Category(ies): Generation
Available now
Warranty: yes
The HGM-2000 converts natural gas or propane to 2,000 standard cubic feet per hour of pure
hydrogen on-site, eliminating the cost of transporting hydrogen. The HGM-2000 contains a
built-in pressure swing adsorption (PSA) gas cleanup system, producing hydrogen with up to 99.999% purity, suitable for a
PEM fuel cell. The high efficiency, low-cost and small footprint of the HGM-2000 makes it the ideal solution for providing
low-cost hydrogen to end users and fueling stations.
Height: 96 inches
Width: 84 inches
Depth: 103 inches
9 of 33 10/10/2009 3:01 AM
National Hydrogen Association http://www.hydrogenassociation.org/general/productsDetails_all.asp
HGM-3000
H2Gen Innovations, Inc.
Visit Website
Application(s): Fueling
Category(ies): Generation
Available now
Warranty: yes
The HGM-3000 converts natural gas or LPG to 3,000 standard cubic feet per hour of pure
hydrogen on-site, eliminating the cost of transporting hydrogen. Each HGM-3000 includes a built-in pressure swing adsorption
(PSA) gas clean-up system, producing up to 99.999% pure hydrogen suitable for a PEM fuel cell.
Height: 99 inches
Width: 90 inches
Depth: 162 inches
Input(s): Natural Gas, Propane
Input range: 1200 scfh min. - 1300 scfh max.
Output type: hydrogen
Output amount: 3000 scfh
Efficiency: 73 HHV
H2scan’s HY-ALERTA™ 1600 Intrinsically Safe Area Hydrogen Monitor provides hydrogen-
specific leak detection and measurement for hydrogen concentrations as low as 4000 ppm
and can be scaled to any concentration up to 5% hydrogen by volume, a range representing
10% to 125% of hydrogen’s low flammability limit. The monitor is designed for either ceiling
or wall mount and has an RS422 capability that extends an intrinsically safe interface from
the sensor to the controller to several hundred feet. H2scan's hydrogen-specific sensor
technology has no cross sensitivity to other combustible gases, thus eliminating false
positive alarms and ensuring safety system reliability.
10 of 33 10/10/2009 3:01 AM
National Hydrogen Association http://www.hydrogenassociation.org/general/productsDetails_all.asp
H2scan’s HY-ALERTA™ 2600 Explosion Proof Area Hydrogen Monitor provides hydrogen-
specific leak detection and measurement for hydrogen concentrations as low as 4000 ppm
and can be scaled to any concentration up to 5% hydrogen by volume, a range representing
10% to 125% of hydrogen’s lower flammability limit. The monitor is designed for either
ceiling or wall mount and has an RS422 capability that extends the interface from the
Sensor Module to the Control Module to several hundred feet. H2scan's hydrogen-specific sensor technology has no cross
sensitivity to other combustible gases, thus eliminating false positive alarms and ensuring safety system reliability.
Application(s): Portable
Category(ies): Sensors
Available: /
H2scan believes that protecting lives means being able to locate and find a hydrogen leak as
quickly as possible. With two sensing elements on the same semiconductor die, the
HY-ALERTA™ 500 can detect hydrogen leaks as low as 15 ppm and will not saturate or be destroyed when detecting
concentrations of hydrogen up to 100%. The flexible cable allows the sensor probe access to virtually all potential leak sources.
11 of 33 10/10/2009 3:01 AM
National Hydrogen Association http://www.hydrogenassociation.org/general/productsDetails_all.asp
Category(ies): Sensors
Available: /
H2scan’s HY-ALERTA™ 600 Fixed Area Hydrogen Monitor provides hydrogen-specific leak
detection and measurement for hydrogen concentrations as low as 4000 ppm and can be scaled to any concentration up to 5%
hydrogen by volume, a range representing 10% to 125% of hydrogen’s low flammability limit. The monitor is designed for
either ceiling or wall mount and has an RS422 capability that extends the interface from the sensor to the controller to several
hundred feet. H2scan's hydrogen-specific sensor technology has no cross sensitivity to other combustible gases, thus
eliminating false positive alarms and ensuring safety system reliability.
H2scan’s HY-OPTIMA™ 1700 in-line, real time hydrogen-specific process monitors are
designed for ease of use, interface flexibility and true process control. The HY-OPTIMA™
1700 is an intrinsically safe, solid state sensor that is configured to operate in process gas
streams with up to 95% relative humidity and temperatures up to 100ºC. It is ideal for
hydrogen production and petrochemical applications where real time measurements of
hydrogen can increase process plant efficiencies, improve diagnostics and enhance
maintenance management translating into higher profitability.
12 of 33 10/10/2009 3:01 AM
National Hydrogen Association http://www.hydrogenassociation.org/general/productsDetails_all.asp
and true process control. The HY-OPTIMA™ 700 is a solid state sensor that can operate in
humidity and process gas streams with temperatures up to 100ºC. The HY-OPTIMA™ 700 is
ideal for hydrogen production and petrochemical applications where real time measurements
of hydrogen can increase process plant efficiencies, improve diagnostics and enhance
maintenance management translating into higher profitability.
Pressure Reducer
Hochdruck reduziertechnik GmbH
Application(s): Light duty , Light duty - automotive, Heavy duty, Stationary, Backup, Auxiliary, Storage, Component, Fueling
Category(ies): Compression Systems, Storage, Handling
Available now
Warranty: yes
Multifunctional Vlves directly mounted on high pressure stoage Tank. J 99 Small 700 bar double Stage pressure redcuer directly
mounted on 700 bar storage Bottle with all homologations CE, PI-Markt, TÜV. Volume of storage from 2 L up to 5 L High
Pressure Storage Tank 34 L 700 bar, Type IV with directly mounted ON Tank Valve or Pressure Reducer. Customer only gets in
access to Low pressure H2-Gas. This storage tank just passed all necessary tests
Hy-Drive’s Clean Air Operating System is designed to improve the operating efficiency of any internal combustion engine.
Hydrogen gas has a flame speed 8X that of diesel fuel and improves flame propagation inside the cylinder. By injecting
hydrogen into the combustion chamber, engines run cooler, cleaner, and extract more useful energy.
Height: 19 inches
Width: 12.5 inches
Depth: 13 inches
Input(s): Electricity, Water
Output type: hydrogen
Output amount: 750 mL/min
Maintenance: 2 Liters of water every 80 hours of service
13 of 33 10/10/2009 3:01 AM
National Hydrogen Association http://www.hydrogenassociation.org/general/productsDetails_all.asp
Atmospheric Electrolyzer
Hydro Oil & Energy
Visit Website
Application(s):
Category(ies): Electrolyzer, Generation
Available now
Warranty: yes
Electrolyzer and hydrogen plant with capacities of hydrogen production ranging from 10 Nm3/hr (350 SCF) to 485 Nm3/hr
(17.100 SCF) per unit.
Application(s):
Category(ies): Electrolyzer, Generation
Available: 07/2008
Warranty: yes
Application(s):
Category(ies): Electrolyzer, Generation
Available: 07/2008
Warranty: yes
PI-2000
HydroGen LLC
Visit Website
14 of 33 10/10/2009 3:01 AM
National Hydrogen Association http://www.hydrogenassociation.org/general/productsDetails_all.asp
Application(s): Stationary
Category(ies): Fuel Cell
Available now
Price: $2000 - 2500/KW
Warranty: yes
HydroGen's core product is a 2 MW power island, built up from 5 identical 400 kW air-cooled PAFC modules. HydroGen uses
standard balance-of-plant (BOP) components with very little customization. This approach, unique in the fuel cell industry but
common in standard chemical plant construction, should reduce cost and technical risk significantly. HydroGen's core
technology, the 400kW fuel cell module, is comprised of four 100 kW sub-stacks within one pressure vessel. Product attributes
and performance of HydroGen's 400kW PAFC technology are summarized below: Capacity: 400kW module, base unit for 2MW
power island Size: 11' tall, 7' diameter Fuels: Steam-reformed NG, clean H2 (H2 plant or byproduct) Efficiency: 43% (LHV H2)
Net water: Up to 800 gal/hour for 10MW system
HyPM HD
Hydrogenics
Visit Website
High durability, easy-to-integrate PEM fuel cell power module available in power outputs of 4kW, 8kW, 12kW, and 16kW.
Compatible in hybrid systems with batteries or ultracapacitors
HyPM XR
Hydrogenics
Visit Website
Application(s): Backup
15 of 33 10/10/2009 3:01 AM
National Hydrogen Association http://www.hydrogenassociation.org/general/productsDetails_all.asp
Compact, fully integrated rack mountable PEM fuel cell power module available in three power outputs - 4 kW, 8 kW and 12 kW.
HyPM XR (OSP)
Hydrogenics
Visit Website
Application(s): Backup
Category(ies): Fuel Cell
Available now
Warranty: yes
Fully integrated backup power system in outdoor enclosure, including HyPM XR fuel cell power module, additional energy
storage, thermal management, master controller, remote monitoring. Hydrogen fuel storage not included (requires an
additional enclosure). Particularly suited to telecommunications installations.
Hybrid fuel cell/ultracapacitor lead acid battery replacement for Class 1 and Class 2 (electric) forklift trucks. Includes integrated
hydrogen storage tank, thermal management subsystem and power controls. (Specifications given apply to Class 1 product)
Height: 57 centimeters
Width: 68 - 83 centimeters
Depth: 97 centimeters
16 of 33 10/10/2009 3:01 AM
National Hydrogen Association http://www.hydrogenassociation.org/general/productsDetails_all.asp
Input(s): Gaseous
Input range: 1.6 kg max.
Output type: electricity
Voltage pressure: 36/48
HySTAT-A 1000D-30-10
Hydrogenics
Visit Website
Application(s): Fueling
Category(ies): Electrolyzer, Generation
Available: /
Hydrogenics' HySTAT-A Hydrogen Stations are based on proprietary pressurized IMET technology. IMET™ technology is
pressurized alkaline electrolysis process that generates high purity hydrogen at pressures up to 25 bar (363 psi) directly from
the electrolyzer module. This high quality hydrogen is obtained through the use of highly efficient inorganic membranes that
serve to channel the hydrogen and oxygen produced during electrolysis.
HySTAT-A 1000Q-60-10
Hydrogenics
Visit Website
Application(s): Fueling
Category(ies): Electrolyzer, Generation
Available: /
Hydrogenics' HySTAT-A Hydrogen Stations are based on proprietary pressurized IMET technology. IMET™ technology is
pressurized alkaline electrolysis process that generates high purity hydrogen at pressures up to 25 bar (363 psi) directly from
the electrolyzer module. This high quality hydrogen is obtained through the use of highly efficient inorganic membranes that
serve to channel the hydrogen and oxygen produced during electrolysis.
Height: 245
Width: 316
Depth: 175
Input(s): Electricity, Water
Input range: 400 VAC max.
Output type: hydrogen
Output amount: 32 to 60 Nm3 / hr
Voltage pressure: 90 to 150 psi 4.8 kWh / Nm3
17 of 33 10/10/2009 3:01 AM
National Hydrogen Association http://www.hydrogenassociation.org/general/productsDetails_all.asp
HySTAT-A 1000S-15-10
Hydrogenics
Visit Website
Application(s): Fueling
Category(ies): Electrolyzer, Generation
Available: /
Hydrogenics' HySTAT-A Hydrogen Stations are based on proprietary pressurized IMET technology. IMET™ technology is
pressurized alkaline electrolysis process that generates high purity hydrogen at pressures up to 25 bar (363 psi) directly from
the electrolyzer module. This high quality hydrogen is obtained through the use of highly efficient inorganic membranes that
serve to channel the hydrogen and oxygen produced during electrolysis.
Hydro-que
Application(s):
Category(ies):
Available: /
Input(s):
Consulting Services
Hyenergy Consulting, LLC
Hyenergy Consulting LLC. offers services in the following areas: Competitive analysis (business, product and technology)
Business plan critique Specific market studies Technology assessment Distribution/sales expansion especially international
Exhibition representation services Codes & Standard consultation
Input(s):
Output type: electricity
HGS-C
HyGear B.V.
Application(s): Fueling
Category(ies): Generation
18 of 33 10/10/2009 3:01 AM
National Hydrogen Association http://www.hydrogenassociation.org/general/productsDetails_all.asp
Available now
Warranty: yes
HGS-L
HyGear B.V.
Application(s): Fueling
Category(ies): Generation
Available now
Warranty: yes
HGS-V
HyGear B.V.
Application(s): Fueling
Category(ies): Generation
Available now
Warranty: yes
Application(s): Light duty , Light duty - automotive, Heavy duty, Stationary, Auxiliary,
Fueling
Category(ies): Generation
Available now
19 of 33 10/10/2009 3:01 AM
National Hydrogen Association http://www.hydrogenassociation.org/general/productsDetails_all.asp
Warranty: yes
The HyRadix Aptus and Adeo hydrogen generation systems produce cost-competitive and reliable hydrogen supply at the
customer's site. The systems are successfully operating in full-scale hydrogen filling stations and in a variety of industrial
applications.
Height: 8
Width: 7.5
Depth: 20
Input(s): Gaseous, Natural Gas, Propane, Ethanol
Input range: 500 Nm3/hr min. - 40 Nm3/hr max.
Output type: hydrogen
Maintenance: Included
Runtime: 24/7
Fuel processor generates hydrogen from multiple liquid and gaseous fuel types, including biodiesel and ULS diesel. Components
configured for SOFC or PEM requirements in the 1-5 kW size range.
Input(s):
Output type: electricity
Output amount: Up to 60 liters per minute of hydrogen
Efficiency: 60-80% LHV
Runtime: 3000 hours
ThunderVolt
ISE Corporation
Visit Website
ISE Corporation, based in San Diego, is a leading supplier of hybrid drive systems and components for heavy-duty vehicles
such as buses, trucks, trams, airport equipment, and military vehicles. ISE is a world leader in electric, hybrid-electric, and fuel
cell technologies, and the U.S. distributor for Siemens ELFA? electric and hybrid-electric drive components. Visit ISE Corp. at
www.isecorp.com.
Input(s): Gaseous
Output type: electricity
20 of 33 10/10/2009 3:01 AM
National Hydrogen Association http://www.hydrogenassociation.org/general/productsDetails_all.asp
HYDROGEN/HYDRIDE FUELD 5 KW IC ENGINE GENERATIN SET. THE HYDROGEN GEN –SET HAS A FUEL TANK OF 3 KG OF H2
WHICH WILL PROVIDE A RUNNING TIME OF 6 HOURS. THE FUEL TANK IN THE ABOVE GEN-SET, HAS BEEN REPLACED WITH
AN HYDRIDE (H2 FUEL TANK, WHICH HAS A CAPACITY OF 3 KG), WE HAVE REACHED 6 HOURS OF RUNNING TIME. THE
HYDRIDE USED HERE IS “ MM-NT-X TYPE “ ( X CATALYZING ELECTRODE ).
Height: 24 inches
Width: 18 inches
Depth: 20 inches
Input(s): Liquid, Water
Input range: 6 hours min.
Output type: electricity
Output amount: 5 units/hour
Voltage pressure: 5000
Efficiency: 90
Maintenance: No
Runtime: 6 hours
The Linde Group is a forerunner in environmentally-friendly hydrogen technology and is committed to the ongoing development
of efficient hydrogen fuelling solutions. The only company covering the entire hydrogen value chain, Linde has expertise from
initial construction of hydrogen production facilities through to operations, distribution and fuelling systems. Today, Linde
supports over 40 hydrogen filling stations all over the world - in fact, almost all existing liquid hydrogen filling stations from
Toronto to Tokyo function with Linde technology. The Linde Group traditionally maintains strong links with a range of science,
research and industry bodies, as well as the worlds’ leading vehicle manufacturers. Close co-operation contributes to continuous
progress and advanced new innovations, such as Linde’s ‘traiLH2™’ mobile hydrogen refueling unit. The Linde Group is a world
leading industrial gas and engineering company with €12bn sales and 51,000 employees working in 70 countries on all
continents. The company’s strategy focuses on the expansion of international business with forward-looking products and
services, including solutions for hydrogen-based sustainable mobility. The Linde Group’s award-winning hydrogen centre in
Munich, Germany, combines the functions of a hydrogen filling station with that of a technology test centre, a training centre
and a presentation platform.
Hydroknowz/ProtiSen H2 Detectors
Neodym Technologies
Application(s): Component
Category(ies): Service, Handling, Fuel Cell, Electrolyzer, Generation
Available now
21 of 33 10/10/2009 3:01 AM
National Hydrogen Association http://www.hydrogenassociation.org/general/productsDetails_all.asp
Price: $$184.00
Warranty: yes
HydroKnowz™ monitors use catalytic sensors to measure hydrogen in air up to 25,000 ppm
(2.5% volume). These sensors feature VOC filters, good long term stability, native linearity,
increased tolerance of silicone-based contaminants, and are immune to overexposure
damage. Options include 3VDC (regulated) or 5-40VDC / 5-60VDC operation, dry relay
contacts, alarm beeper, 0-3VDC / 4-20mA (proportional) or TTL (binary) output signal.
Pdc Machines manufactures diaphragm compressors for leak-tight and contamination-free compression of all types of gases.
Discharge pressures can reach 15,000 psi (1,000 barg). Horse-power ranges from 3 to 200. By utilizing over 30 years of
experience in high-pressure system integration along with our customers' process knowledge, Pdc can provide component and
systems packaging for hydrogen fueling applications.
Height: 8 inches
Width: 2.5 inches
Depth: 2.5 inches
Input(s): Gaseous, Water,O2, Air
Input range: 12 lpm min. - 50 lpm max.
Output type:
Output amount: 12-50 lpm
Voltage pressure: N/A
Efficiency: >90
Maintenance: None
Runtime: > 15,000 hours
22 of 33 10/10/2009 3:01 AM
National Hydrogen Association http://www.hydrogenassociation.org/general/productsDetails_all.asp
Membrane humidifier for use with H2, O2 or air. Water/gas or gas/gas operation.
Membrane humidifier for use with H2, O2 or air. Water/gas or gas/gas operation.
Application(s): Light duty , Light duty - automotive, Heavy duty, Stationary, Backup, Auxiliary
Category(ies): Handling
Available now
Price: $1525.00
Warranty: yes
23 of 33 10/10/2009 3:01 AM
National Hydrogen Association http://www.hydrogenassociation.org/general/productsDetails_all.asp
Membrane humidifier for use with H2, O2 or air. Water/gas or gas/gas operation.
Height: 15 inches
Width: 5 inches
Depth: 5 inches
Input(s): Gaseous,O2, Air
Input range: 170 lpm min. - 680 lpm max.
Output type:
Output amount: 170 - 680 lpm
Voltage pressure: 0
Efficiency: > 90
Maintenance: None
Runtime: > 15,000 hours
Application(s): Light duty , Light duty - automotive, Heavy duty, Stationary, Backup, Auxiliary
Category(ies): Handling
Available now
Price: $2050.00
Warranty: yes
Membrane humidifier for use with H2, O2 or air. Water/gas or gas/gas operation.
Height: 16 inches
Width: 6 inches
Depth: 6 inches
Input(s): Gaseous,O2, Air
Input range: 250 lpm min. - 1000 lpm max.
Output type:
Output amount: 250 - 1000 lpm
Voltage pressure: 0
Efficiency: > 90
Maintenance: None
Runtime: > 15,000 hours
Application(s): Light duty , Light duty - automotive, Heavy duty, Stationary, Backup, Auxiliary
Category(ies): Handling
Available now
Price: $4975.00
Warranty: yes
Membrane humidifier for use with H2, O2 and air. Water/gas or gas/gas operation.
Height: 15 inches
Width: 8.5 inches
Depth: 8.5 inches
Input(s): Gaseous,O2, Air
Input range: 550 lpm min. - 2200 lpm max.
Output type:
Output amount: 550 - 2200 lpm
Voltage pressure: 0
Efficiency: > 90
24 of 33 10/10/2009 3:01 AM
National Hydrogen Association http://www.hydrogenassociation.org/general/productsDetails_all.asp
Maintenance: None
Runtime: > 15,000 hours
PR-202 Humidifier
Perma Pure LLC
Small membrane humidifier for use with H2, O2 or air. Water/gas or gas/gas operation. Designed for portable and electric
bicycle applications.
Height: 9 inches
Width: 1.5 inches
Depth: 1.5 inches
Input(s): Gaseous,O2, Air
Input range: 4 lpm min. - 16 lpm max.
Output type:
Output amount: 4 - 16 lpm
Voltage pressure: 0
Efficiency: > 90
Maintenance: None
Runtime: > 15,000 hours
GenCore 5T24
Plug Power Inc.
Visit Website
Application(s): Backup
Category(ies): Fuel Cell
Available: /
Plug Power’s GenCore® hydrogen fuel cell systems provide clean, quiet and energy efficient
solutions for the critical backup power needs of wireless and wireline providers. Our flexible,
platform-based product architecture delivers backup power and runtimes that are scalable to
your specific needs.
Height: 46 inches
Width: 36 inches
Depth: 32 inches
Input(s): Gaseous
Input range: 64 psig min. - 110 psig max.
Output type: electricity
Output amount: 240 amps DC
Voltage pressure: +24.9 to +27.5
25 of 33 10/10/2009 3:01 AM
National Hydrogen Association http://www.hydrogenassociation.org/general/productsDetails_all.asp
Warranty covers 1 year or 2000 hour parts and labor, excluding preventative maintenance
parts and labor, or 2 year or 5000 hour stack warranty (whichever comes first)
Height: 13 inches
Width: 31 inches
Depth: 38.5 inches
Input(s): Gaseous
Output type: electricity
Output amount: 550 Ahrs
Voltage pressure: 24
Maintenance: Standard Preventative Maintenance
Runtime: Full 8hr Shift
Protium Energy Technologies offers expert consulting service in the field of hydrogen, fuel cells and alternative energy in the
areas of: Technology evaluation and selection Technology commercialization Business and R&D strategy development Business
and technology partnering Contract R&D sales Product sales Project development
Input(s):
Application(s): Fueling
Category(ies): Electrolyzer, Generation
Available now
These compact hydrogen generators fit conveniently on a standard lab bench. Available with outputs up
to 600 cc/min of hydrogen, the HOGEN GC onsite hydrogen generator produces a continuous supply of 99.9999% pure,
pressurized hydrogen and can suport up to 12 GC FID systems, including carrier gas.
26 of 33 10/10/2009 3:01 AM
National Hydrogen Association http://www.hydrogenassociation.org/general/productsDetails_all.asp
Modular, scalable backup power systems. Hydrogen is generated on-site from water and is stored safely
and efficiently without mechanical compressors using our proton exchange membrane (PEM) electrolyzers.
Height: 71 inches
Width: 32 inches
Depth: 75 inches
Input(s): Electricity, Water
Output type: hydrogen
Output amount: 76-228 scf/hr
HOGEN RE S Series
Proton Energy Systems
Visit Website
Height: 38 inches
Width: 41 inches
Depth: 42 inches
Input(s): Electricity, Water
Input range: 190V min. - 240V max.
Output type: electricity
Output amount: 40 scf/hr hydrogen
H-3100
QuestAir
Visit Website
Application(s): Fueling
Category(ies): Generation
Available: /
The most compact, economical and reliable PSA systems available today, the H-3100 efficiently upgrades hydrogen-containing
reformate and off-gas streams to ultra-pure hydrogen with minimal pressure drop, remarkable uptime performance, and simple
27 of 33 10/10/2009 3:01 AM
National Hydrogen Association http://www.hydrogenassociation.org/general/productsDetails_all.asp
installation and operation. Fully skid mounted and factory loaded with adsorbent, the QuestAir™ H-3100 is available in a range
of sizes and market applications, and has proven itself in numerous installations in Asia, North America, and Europe.
QuestAir H-3200
QuestAir Technologies Inc.
Visit Website
Application(s): Fueling
Category(ies): Generation
Available now
Price: $150,000
Warranty: yes
QuestAir's H-3200 combines patented QuestAir rotary valve technology and conventional
beaded adsorbents with an optimized PSA cycle to deliver higher hydrogen recovery
performance than conventional PSA systems. The QuestAir H-3200 requires only one-quarter
of the space of conventional PSA and, with only two valves, is simpler to operate. The
QuestAir H-3200 offers a highly efficient, cost effective hydrogen purification solution for
hydrogen fueling stations that generate hydrogen from natural gas and other hydrocarbon
fuels, and for small on-site hydrogen generation systems. The H-3200 is currently available
in a range of capacities from 5 to 5000 NCMH (product hydrogen flow), and comes skid-mounted, ready for fast and simple
installation.
Application(s): Backup
Category(ies): Fuel Cell
Available now
Warranty: yes
The T-1000® fuel cell system is designed specifically for communications backup power applications within the
telecommunications, utility and government sectors with the only emission being water. The T-1000® fuel cell uses patented
Modular Cartridge Technology® for hot-swappable high reliability, ease of maintenance, and simplicity of design. Modular
electronics cards enable scalability by providing flexible configuration from 600 Watts to its full 1,200 Watt capacity.
28 of 33 10/10/2009 3:01 AM
National Hydrogen Association http://www.hydrogenassociation.org/general/productsDetails_all.asp
Application(s): Backup
Category(ies): Fuel Cell
Available now
Warranty: yes
The T-2000® fuel cell system is designed specifically for larger communications backup power loads within the wireless and
wireline telecommunications, utility and government sectors. The T-2000® fuel cell uses ReliOn's patented Modular Cartridge
Technology® for hot-swappable high reliability, ease of maintenance and simplicity of design. Modular electronics cards enable
scalability by providing flexible configuration from 600 Watts to a full 2,000 Watt capacity in one chassis. Or combine multiple
T-2000® fuel cells to provide higher outputs for a variety of site requirements up to 12kW.
Height: 26 inches
Width: 21 inches
Depth: 21.5 inches
Input(s): Gaseous
Output type: electricity
Voltage pressure: 24 / 48
DeteCoat
Renew Systems Group
Application(s): Light duty , Light duty - automotive, Systems Packaging, Heavy duty, Stationary, Backup, Auxiliary, Storage,
Fueling
Category(ies): Sensors
Available now
Price: $$75
Warranty: yes
DeteCoat is a patent , IP protected paint/coating that can be applied to vessels, fittings, valves, and pipes that will change color
immediately upon the presence of Hydrogen leaks. Perfect partner to existing detector technology. Find that leak faster with a
visual aid! Sensitivity and longevity can be adjusted to environmental or other needs. Product comes in 12 oz spray can for
easy application. pricing is between $50 and $75 per 12 oz can depending on volume.
Input(s):
Maintenance: reapply every 6 months as you recalibrate your other detectors
Lightweight and durable composite cylinders for the storage of hydrogen and other high pressure gases
29 of 33 10/10/2009 3:01 AM
National Hydrogen Association http://www.hydrogenassociation.org/general/productsDetails_all.asp
Input(s): Liquid
Output type: electricity
We provide support and infrastructure oversight for hydrogen and alternative research development in the fields of H2 Safety,
Alternative Energy interface, Personal Rapid Transit,
Application(s): Education
Category(ies): Conversion , Storage, Handling, Fuel Cell
Available now
Price: $35000/year
The University of South Carolina Industry/University Cooperative Center for Fuel Cell Research is certified by the National
Science Foundation and has been in existence since June of 2002. The Center has 14 industrial members and conducts basic,
pre-competitive research in the areas of hydrogen generation, hydrogen storage, fuel cell testing, fuel cell modeling and
balance of plant and power conditioning. The Center also provides education in fuel cell technology for graduate and
undergraduate student.
Input(s): Gaseous
Output type: electricity
Hydrocell
Valeswood ETD Ltd.
With its internal 40 litre low-pressure metal hydride hydrogen storage the Hydrocell is a convenient, safe and easy-to-use
portable rechargeable hydrogen fuel cell battery that is just as easy to use as a lead acid battery.
Width: 44 centimeters
Input(s): Gaseous
Input range: 0.8V min. - 14.5V max.
30 of 33 10/10/2009 3:01 AM
National Hydrogen Association http://www.hydrogenassociation.org/general/productsDetails_all.asp
Application(s): Light duty - automotive, Heavy duty, Stationary, Backup, Auxiliary, Storage,
Component, Fueling
Category(ies): Service, Handling, Fuel Cell, Electrolyzer, Generation
Available now
Warranty: yes
700 bar working pressure/875 bar fill pressure, Hydrogen Gas Nozzles, Receptacles & Breakaway couplings for for fueling
vehicle applications. Product chosen under SAE TIR J2799 as preferred profile and sealing system for proven safety and
efficiency. TUV certified and customer field verified for over 4 years. Receptacles & nozzles available with most global thread
types. Also available with filters to eliminate particle contamination. Walther Prazision has also designed and developed Liquid
Hydrogen nozzles and receptacles in parellel with gaseous hydrogen.
Application(s): Fueling
Category(ies): Generation
Available now
Warranty: yes
Ztek’s High Performance Steam Reformers (HPSR) will convert natural gas, ethanol or diesel, to hydrogen approaching 80
percent efficiency, meaning that 80% of the energy contained in the fuel will be converted into useful hydrogen. HPSR-600H
will produce 600 standard cubic feet of hydrogen (scfh) per hour while HPSR-4000H will produce 4000 scfh per hour. Each
individual model will fit in a 3’ by 6’ by 10’ or a 10’ by 10’ by 10’ space respectively. This size will allow easy integration into
existing or equivalent fueling stations and will give station owners tremendous flexibility in scaling the size of their hydrogen
supply. Ztek reformers also will enable true zero-emissions operation by allowing for the separation and sequestration of carbon
dioxide, the only by-product of its fuel-to-hydrogen conversion.
Height: 80 inches
Width: 120 inches
Depth: 36 inches
Input(s): Natural Gas, Ethanol
Output type: hydrogen
Output amount: 600 or 4000 scf of hydrogen
Voltage pressure: 208
Efficiency: 80 LHV
Maintenance: Quarterly
Runtime: Baseload
31 of 33 10/10/2009 3:01 AM
National Hydrogen Association http://www.hydrogenassociation.org/general/productsDetails_all.asp
Ztek’s HECP system is available in two models. The first will produce 300 standard cubic feet of hydrogen(scfh)per hour with
10kW of electricity. The second will produce 2000 scfh per hour with 75kW of electricity. Each model is highly integrated, fully
balanced and optimally efficient in design and construction. Unlike other energy stations in development that use discrete
systems, e.g. separate reformer, purification, and fuel cell components, this system will be delivered in a space saving, single-
enclosure, low cost framework. The operation of the system will be capable of load following to accommodate various usage
conditions and maximize economic value. For example, during peak demand hours for power or low demand periods for
hydrogen, the system will maximize electricity output and idle hydrogen production and vice versa.
Height: 80 inches
Width: 120 inches
Depth: 36 inches
Input(s): Natural Gas, Ethanol
Output type: Electricity and Hydrogen Co-Production
Output amount: 300 scfh and 10kW
Voltage pressure: 208
Efficiency: 85+/- LHV
Maintenance: Quarterly
Runtime: Baseload
Application(s): Stationary
Category(ies): Fuel Cell
Available now
Warranty: yes
Ztek Corporation is producing solid oxide fuel cell (SOFC) systems for distributed electrical generation applications with or
without the capability to provide heating and air conditioning. All models will provide low-cost, clean and efficient energy
production. The 25E offers 25kW of electrical output and fits in a 3’ by 6’ by 10’ space. The 100E combines a SOFC with a gas
turbine for distributed generation applications. Replacing the combustor of a traditional microturbine with a high temperature
solid oxide fuel cell will allow system efficiency to reach 60 percent and reduce greenhouse emissions by 50%. The unit is
compact, fitting in a 10’ by 10’ by 10’ space. Both units can be run on natural gas, ethanol or gasoline.
Height: 80 inches
Width: 120 inches
Depth: 36 inches
Input(s): Natural Gas, Ethanol
Output type: electricity
Voltage pressure: 208
Efficiency: 40+ LHV
Maintenance: Quarterly
Runtime: Baseload
32 of 33 10/10/2009 3:01 AM
National Hydrogen Association http://www.hydrogenassociation.org/general/productsDetails_all.asp
[ Close ]
33 of 33 10/10/2009 3:01 AM