Professional Documents
Culture Documents
Highway Lab
Highway Lab
Highway Laboratory
The following is a list of tests and preparatory work preformed in the Highway Laboratory and the equipment
used in this function:
---Large oven
5. Curing/Aging of samples-----------------------------------Incubator
---Digital Thermometer
-----Penetrometer
----Sliding plate Micro viscometer
----X-Y recorder
-----Procter mould
-----CBR mould
----Wax pot
----Tensiometer Kit
-----Air compressor
-----Set of Dividers
-----Rule
-----Extruder
Although not referred to above some of the machines are computer controlled.
The Highway Laboratory contains more apparatus and utensils not listed above. These would consist of
consumables such as glassware, tamping rods, spatula etc...
Fax : +(91)-(11)-25165254
Email : info@accrotechscientific.com , accrotech4@rediffmail.com
Specification :
Ductility Testing Machine Electrically Operated for determining the
ductility of asphalt and bitumen. The ductility of bitumen is
expressed as the distance in centimeters to which a standard
briquette can be elongated before the thread thus formed breaks
under specified conditions. The Machine is designed to test three
specimens simultaneously, and consists of a bath thermostatically
Send Enquiry controlled with inlet and outlet taps and is equipped with an electric
pump circulator & heater and carriage moving over a lead screw.
Fixed and movable brackets are so positioned that specimen is
submerged in water throughout. A clutch arrangement is made to
stop the movement of the movable bracket when rapture of the
specimen is noticed. An electric motor driven reduction gear unit
ensures smooth constant speed and continuous operation and
provides two rates of pull / travel, i.e., 50mm/min and 10 mm/min
in the machine.
Send Enquiry
Cat No : AT-232
NAME : Standard Tar Viscometer
Quality Standard : As Per IS 1206
Specification :
Standard Tar Viscometer used for determining the viscosity of cut
back bitumen and road-oil. The viscometer consists of a chrome
plated copper bath, with a drain valve and a central tube to receive
the test cup and to position the stirrer, and is mounted on a stand
with leveling feet. Stirrer has a curved shield and is provided with
an insulated handle, thermometer socket and swivel support for the
valve. Supplied complete with 10 mm cup and ball valve or 4mm
cup and ball valve as per the requirement and Electrical Heater with
immersion heating elements and Dimmerstat for controlling the
temperature.
Send Enquiry
Cat No : AT-234
NAME : Bitumen Laboratory Mixer
Specification :
Laboratory Mixer for mixing of Bitumen for making different types of test
specimens for mix design in the laboratory. The apparatus comprises of A
motor driven mixer which simultaneously imparts two motions to the
mixing paddle i.e. revolving and planetary. A two speed gearbox is
incorporated in the drive which makes the paddle revolve at approximately
140 and 285rpm with corresponding planetary motion of 62 and 125rpm
respectively, A stainless steel mixing paddle of the specified shape and
dimension which can be attached or removed easily, A stainless steel
mixing bowl of about 6Ltr capacity fitted with Heating Jacket for Heating
of Sample at the Bottom of bowl with the thermostat controller. The mixing
bowl can be held with the mixing apparatus and its height is adjustable.
Send Enquiry
Cat No : AT-242
NAME : Core Cutting Machine
Specification :
Core Cutting Machine, diesel engine powered (Grieves Make or
equivalent) has been designed specifically for the purpose of cutting
core samples from Asphalt, concrete & reinforced structure of roads,
airport runways, bridges etc. The Machine comprises of two vertical
support columns which carry the drill head/ engine assembly
accurately with the help of screwed spindles. The Machine will be
supplied with water tank for coolant to the cutting bit. The core-cutting
Send Enquiry machine is portable & has towing arrangement with pneumatic wheels
for easy movement. The machine complete as above supplied with Set
of Diamond Core Cutting Bit (s) & Barrel (s).
Cat No. & Name Type of Engine Capacity of Engine Cutting Capacity
AT-242 (a): Core Cutting Machine Diesel Operated 4 HP Capacity 100mm Dia x 200mm Ht
AT-242 (b): Core Cutting Machine Diesel Operated 5 HP Capacity 100mm Dia x 200mm Ht
AT-242 (c): Core Cutting Machine Diesel Operated 7.2 HP Capacity 100mm Dia x 200mm Ht
AT-242 (d): Core Cutting Machine Diesel Operated 5 HP Capacity 100mm Dia x 200mm Ht
150mm Dia x 300mm Ht
100mm Dia x 200mm Ht
AT-242 (e): Core Cutting Machine Diesel Operated 7.2 HP Capacity
150mm Dia x 300mm Ht
Send Enquiry
Specification :
Thin Film Oven test is conducted for determining the effect of the heat
and air on asphaltic material as per the requirements of IS: 9382.
Loss on Heating test is conducted for determining the loss in weight of
bitumen and flux-oils on heating as per the requirements of IS: 1212.
Send Enquiry
Specification :
Penetration Apparatus are used for testing bitumen, tar, cement and
soils. A Chosen force is applied over a given area for a known period
of time and the depth of penetration or the depression made in the
sample is measured in tenths of a millimeter which is expressed as a
penetration number. An accurately machined aluminium base with in-
set spirit level has been designed to facilitate penetration tests to be
Send Enquiry made over a wide surface area of sample, Adjustable feet are provided
in the base for leveling and a head support, mounted on a vertical rod
which can be adjusted for head, a rack & pinion and pointer assembly
provides for fine adjustments of needle or cone tip to sample
incorporated a slipping clutch mechanism which makes reading of
penetration and subsequent resetting a simple and accurate operation.
Each Penetrometer is supplied with a Plunger and Needle weighing
50g for testing bituminous products, one of each 50gm & 100gm
weights, and one of each aluminium sampling containers 55mm dia x
53mm ht & 55mm dia x 35mm ht.
Send Enquiry
NAME : Ring & Ball (Softening Point) Test Apparatus
Quality Standard : As Per IS 1205
Specification :
Ring & Ball (Softening Point) test apparatus is used for determination
of softening point of bituminous materials. Softening point is that
temperature at which the specimen under test becomes soft enough to
allow a steel ball of specific dimensions to fall a required distance
under test conditions.
Send Enquiry
Send Enquiry
Cat No : AT-235-1
NAME : Marshal Stability Test Apparatus
Quality Standard : As Per ASTM-D-1559
Specification :
The test is intended for the measurement of the resistance to plastic
flow of cylindrical specimens of bituminous paving mixture loaded on
the lateral surface. For use with hot mixture containing asphalt or tar
and aggregate upto 25.4 mm maximum sizes. The apparatus consists of
following:
Marshal Load Frame 50kN capacity, Electrically Operated,
Send Enquiry with platen rate travel of 50.8mm/min. Safety cutoff switch is
provided with the machine to avoid from overloading – 1No.
Marshal Compaction Pedestal for compaction of 101.6mm (4”)
dia specimen – 1No.
Breaking head assembly to accommodate specimen of
101.6mm dia with dial gauge 0.01 x 25mm travel – 1 Set.
Specimen Extractor (Platen, Steel Ball & Extracting Rod) – 1
Set.
Marshal Specimen Mould 101.6mm dia (4”) complete with
collar and base plate – 3 Nos.
Marshal Compaction Hammer 4.53kg (10 lb) x 457mm (18”)
drop height – 2 Nos.
Send Enquiry
Cat No : AT-235-2
NAME : Modified Marshal Stability Test Apparatus
Quality Standard : As Per ASTM-D-1559
Specification :
The test is intended for the measurement of the resistance to plastic
flow of cylindrical specimens of bituminous paving mixture loaded on
the lateral surface. For use with hot mixture containing asphalt or tar
and aggregate upto 25.4 mm maximum sizes. The apparatus consists of
following:
Marshal Load Frame 100kN capacity, Electrically Operated,
Send Enquiry with platen rate travel of 50.8mm/min. Safety cutoff switch is
provided with the machine to avoid from overloading – 1No.
Marshal Compaction Pedestal for compaction of 152.4mm (6”)
dia specimen – 1No.
Breaking head assembly to accommodate specimen of
152.4mm dia with dial gauge 0.01 x 25mm travel – 1 Set.
Specimen Extractor (Platen, Steel Ball & Extracting Rod) – 1
Set.
Marshal Specimen Mould 101.6mm dia (4”) complete with
collar and base plate – 3 Nos.
Modified Marshal Compaction Hammer 10.2kg (22.5lbs)
149.4mm dia x 457mm (18”) drop height – 2 Nos.
Proving Ring, 25kN or 30kN or 50kN (as per requirement)
capacity fitted with dial gauge with set of loading pads and
calibration certificate in a nice wooden carrying case.
Send Enquiry
Specification :
For determining bitumen percentage in Bituminous paving mixtures. It
has a removable, precision machined, aluminium rotor bowl, mounted
on a vertical shaft. A filter paper disc is pressed in-between the rotor
bowl and cover plate by tightening a knurled nut. The bowl assembly
is enclosed in a housing operating model; the rotor bowl is coupled to
a motor. The solvent may be introduced during test through a cup on
the housing cover. The apparatus is supplied complete with a Pack (50
Circles) of Filter Paper.
Send Enquiry
Send Enquiry
Cat No : AT-276
NAME : Flash & Fire Point Test Apparatus
Quality Standard : As Per IS 1209
Specification :
Flash & Fire Point Apparatus used for determining the flash point of
fuel oils and lubricating oil, bitumen other than cutback bitumen and
suspension of solids in liquids, having a flash point above 49°C. The
apparatus consists of brass test cup with handle removable cup cover
with the spring operated rotated shutter having oil test jet flame device,
stirrer with flexible shaft. The assembly rests in Air Bath which is
covered with dome shape metal top. The cup assembly is positioned in
a cast iron air bath, fitted with a chrome plated brass top having
electric heater with temperature controller. Suitable for operation on
220V, 1Ph, 50Hz AC Supply.
Send Enquiry
LAWRENCE & MAYO
PRODUCT BITUMINOUS
BITUMINOUS TEST LM17701 : MARSHALL STABILITY APPARATURS
Description: Conforms to : A.S.T.M.D. : 1559 Widely used for determination of stability and flow measurement
of asphalt or tar mixed with aggregrates upto the maximum size of 25. 4 mm. The test is conducted to measure
the resistance of plastic flow of the specimen. It comprises of : Loading frame 30kN Hand-cum-Motorised with
a strain rate of 50.8 mm./min. Wired for 230V., sph. 50 Hz. Cylindrical compaction mould (steel) _ 3 nos. Base
plate _ 3 nos. Extension collar _ 3 nos. Compaction pedestal manually operated steel plate fitted on a hard wood
block complete with specimen holder semi-circular base and a circular top to hold the specimen. Compaction
hammer for use with compaction pedestal and mould, weight 4.5 kg. with a free fall of 457mm. Breaking head
assembly for flow measurement. Load transfer bar. Supplied with proving ring 30 kN capacity.
Description:
Description:
Description: The unit is driven by a mechanism which lifts the rammer weighing 4.5 kg. and drops it through a
correct height of 457 mm. An automatic counter enables the number of blows to be preset before each test and
automatically stops the machine on completion. Supplied with one rammer of 4.5 kg. weight. Wired for 230V.,
sph. 50 Hz.
BITUMINOUS TEST LM17703 : LABORATORY MIXING APPRATUS
Description: The mixer is electrically operated, with heating jacket suitable for preparation of bituminus mix.
Capacity 5 kg. Wired for 230V., sph. 50 Hz.
BITUMINOUS TEST LM17704 : CENTRIFUGAL EXTRACTOR (HAND OPERATED)
Description: Conforms to A.S.T.M.D : 2172 The centrifugal extractor designed for 1.5 kgs.of sample mix. It is a
safe and portable unit for accurate determination of bitumen percentage, character and gradation of aggregates
in field operations. The centrifuge is a cast aluminium rotor bowl, mounted on a vertical shaft and enclosed
inside a leak tight housing. The rotor is bowl shaped and can be removed for weight determination. The gears
operate in an oil bath, with splash lubrication.Supplied without filter discs and solvent.
Description:
Description:
Description: Electrically operated design to carry out test on three specimens simultaneously. The body made of
hard wood is lined with stainless steel, having two rates of travel i.e. 5 cm./min. and 1 cm./min. The equipment
is fitted with a water circulator and heater. The temperature is controlled thermostatically. The apparatus is
supplied with three ductility mould along with one extra mould with base plate. Wired for 230V., sph. 50 Hz.
Description: Conforms to IS : 1203 The unit consists of a vertical pillar mounted on a base, provided with
levelling screws. The dial gauge rod fitted either with cone or needle, slides on a pillar and can be clamped at
required hight. The dial gauge is graduated to 400 divisions with 0.1 mm. least count. Supplied with 50 and 100
gms. wts.
BITUMINOUS TEST LM17708 : AUTOMATIC PENETROMETER
Description: Similar to LM17707, but supplied with electro-controlled plunger locking device to control
Description: Conforms to IS :1205 This apparatus is used to determine the softening point of bituminous
materials such as asphalts and tar. It consists of : Steel balls 9.5 mm. diameter _ 2 nos. Tapered brass ring _ 2
nos. Ball Guide _ 2 nos. Ring holder _ 1 no. The bath is of heat resistance glass beaker I.D. 85 mm.and depth
Description: Similar to LM17709, but supplied with a heating unit with an energy regulator for temperature. An
electrically operated stirrer mounted on a stand with chuck and glass rod for stirring water in the bath. Wired for
230V., sph. 50 Hz.
BITUMINOUS TEST LM17711 : TAR VISCOMETER FOR 4 MM. ORIFICE (ELECTRICAL)
Description: Conforms to IS : 1206 The viscometer is suitable to determine the viscosity of tar and cut back
bitumen. The unit comprises of : Copper water bath crome platted with a drain valve and central tube to receive
the test cup and to position the stirrer. Manually operated stirrer. Thermometer. Swivel support for the valve.
Ball valve of 4 mm. orifice. Electrically heated with immerson elements and dimmerstat. Wired for 230V., sph.
50 Hz.
BITUMINOUS TEST LM17712 : TAR VISCOMETER FOR 10 MM. ORIFICE (ELECTRICAL)
Description: Similar to LM17711, except that the orifice size is 10 mm. instead of 4 mm.
Kartar Engineering Works (Regd.)
( Online Catalog)
testing equipments, aggregate impact testers, crushing apparatus, los angeles abrasion
machines, bitumen testing equipments, bitumen
Address : Aa/7 Street No. 4d Anand Parbat Indus. Area, New Rohtak Road, New Delhi -
110005, India
Phone : 91-11-32928127
Mobile : +919810311646
Fax : 91-11-25436806
Associate Agencies
( Online Catalog)
Manufacturer & exporter of equipment, testing & measuring instruments, hand riveter,
automotive hand tools, allied tools, drill bit, moulds aggregate impact testing apparatus,
automatic level, bitumen
Address : 01, Jilla Panchayat Building, Lal Darwaja, Ahmedabad - 380001, Gujarat,
India
Phone : 91-79-25507814/25510550
Mobile : +919825049653
Fax : 91-79-25510550
Manufacturing and exporting testing equipment like marshall stability machine, bitumen automatic
penetrometer, standard test sieves, core cutting machine, bitumen extractor, electrically operated
vibrating machine and bitumen mixer.
Address: A-27C Ground Floor, Mansarovar Garden Opposite Kirti Nagar, Timber Market,
New Delhi - 110 015, India
Phone: +(91)-(11)-25165253/25165254 Fax: +(91)-(11)-25165254
Mobile / Cell Phone: +(91)-9810035130/9810138911
Website: http://www.accrotechscientific.com/soil-testing-equipments.html
Address: No. 4, Senthil Nagar, 100 Feet Road, Chennai - 600 094, India
Phone: +(91)-(44)-23621476 Fax: +(91)-(44)-23620360
Website: http://www.cleanairequipments.com/
Address: 15/17, 1st Floor, Ashok Nagar, New Delhi - 110 018, India
Phone: +(91)-(11)-25130328/25595857/25529384 Fax: +(91)-(11)-25130329/25529384
Mobile / Cell Phone: +(91)-9810293322
Website: http://www.rajcoscientific.com/
Shambhavi Impex
Manufacturers and sellers of material testing equipment, concrete testing machine, abrasion test
machine, soil testing instruments, bitumen test equipment, torsion testing system, density testing
apparatus and spring testing machines.
Address: 108, NECO Chamber, 1st Floor, Plot No. 48, Sector -11, CBD Belapur, Navi Mumbai - 400 614,
India
Phone: +(91)-(22)-40125628/40125629/65114923 Fax: +(91)-(22)-40125630
Mobile / Cell Phone: +(91)-9820418723
Website: http://www.shambhaviimpex.com/civil-engineering-equipment.html
Address: WZ 3, Krishna Nagar, Sahib Pura, Tilak Nagar, New Delhi - 110 018, India
Phone: +(91)-(11)-28334903 Fax: +(91)-(11)-28334903
Mobile / Cell Phone: +(91)-9910119233/9212404377
Website: http://www.soiltestindia.com/
Acquavir International
Manufacturer and supplier of testing machines, compression testing machines, universal testing
machines, soil testing equipments, tensile testers, tensile testing machine, testing apparatus,
slump test apparatus and testing equipments.
Address: 15, Parijat Bldg, Sunder Lane, B J Marg, Byculla (west), Mumbai - 400 011, India
Phone: +(91)-(22)-23011914 Fax: +(91)-(22)-23011915
Website: http://www.acquavirinternational.com/
Rupson Industries
Exporting and manufacturing testing equipment, soil testing equipment, material testing equipment,
cement testing equipment, concrete testing equipment, compression testing equipment, aggregate testing
equipment and impact testing equipment.
Address: No. 9238/6, Multani Dhanda, Pahar Ganj, New Delhi - 110 055, India
Phone: +(91)-(11)-23512093/23677774/23677775 Fax: +(91)-(11)-23512093
Mobile / Cell Phone: +(91)-9310646767/9711696568
Website: http://www.rupsonindustries.com/testing-instruments.html
Send Trade Enquiry Now
GUBBI ENTERPRISES
Manufacturer and supplier of concrete testing machines, hydraulic concrete testing machines, cube
testing machines, handy concrete testing machines and electric concrete testing machines.
Address: Jyoti Apartment, Ground Floor, Opp. New Kalwa High School, Old Thane Belapur Road, Kalwa,
Thane - 400 605, India
Phone: +(91)-(22)-25392279/9322451475
Mobile / Cell Phone: +(91)-9324102410/9324102410
Website: http://www.gubbienterprises.com/
Send Trade Enquiry Now
Testwel Instruments Company
Engaged in exporting of soil testing equipment such as bitumen testing equipment, concrete test
equipment, soil test equipment, material testing equipment, cement testing equipment, rock testing
equipment and aggregate testing equipment.
Address: 7-7, Old Double Storey, Lajpat Nagar-IV, New Delhi - 110 024, India
Phone: +(91)-(11)-26412407 Fax: +(91)-(11)-26471596
Mobile / Cell Phone: +(91)-9811054839/9811664839
Website: http://www.indiamart.com/ticom/
Send Trade Enquiry Now