Professional Documents
Culture Documents
0 3-20-12
UHC
Model
Number Slot H
FBR-10 of Slots Width (Height)
FBRI-10 1 1 3 3/8
2 1 2 1/8
Uninsulated
Insulation
2-1/2"
Note:
Return Hoods are 51%
free area. Finish is #84
black. Insulated
FBPI-10 FBPI-10-2CRA
General Description
• Model FL-TZ is a FlowBar linear • Pattern controllers change • Diffuser material is extruded
diffuser designed to fit into Armstrong direction of the air flow. Maximum aluminum.
TechZone ceiling grid systems in 4" length is 24”. Pattern controllers • Endcaps are not insulated on Plenum
and 6" nominal widths. are furnished in multiple sections models.
• The FL-TZ has a 1" wide slot and is for diffusers longer than 24”. • Assembled one slot unit weighs
available in either high throw (HT) or • Available in 3 border types: LT approximately 1 lb./ft.
jet throw (JT) configuration. (lay-in), NT (narrow tee), and DF
(drop face)
This submittal is meant to demonstrate general dimensions of this product. The drawings are not meant to detail every aspect of the product. Drawings are not to scale. Titus
reserves the right to make changes without written notice.
All rights reserved. No part of this work may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or by any information storage retrieval system without permission in writing from Air Distribution Technologies.