Professional Documents
Culture Documents
APPENDIX
The error codes listed below are accessible only from programming languages like C++ or
Visual Basic. The interfaces provided for Excel and 1-2-3 intercept these error numbers and
return appropriate Excel or 1-2-3 error values. This is done to avoid inadvertent use of an
error value in a cell equation. In Mathcad, an error message is printed in a box near the
function.
If you have developed programs using earlier versions of WinSteam be aware that the
numeric values of the error codes has changed to accommodate the fact that some properties
have negative values when using some of the new unit systems. Nine new codes have also
been added to make it possible to better identify the cause of an error.
WinSteam will accept a maximum temperature of 1600 deg F for pressures greater than 1450
psia or up to 3632 F for lower pressures. Any attempt to calculate steam properties at
temperatures above these points will generate this error.
WinSteam does not handle thermodynamic properties below a pressure of 0.088 Psia or a
temperature of 30 º F.
WinSteam will accept a maximum pressure of 15700 Psia. Any attempt to calculate steam
properties at pressures above this point will generate this error.