Professional Documents
Culture Documents
Iqi PDF
Iqi PDF
CQEP-RT-021
REV. NO. 00
RADIOGRAPHIC TESTING
PAGE Page 10 of 32
PROCEDURE
REV. NO. 00
RADIOGRAPHIC TESTING
PAGE Page 11 of 32
PROCEDURE
Note: The wire diameters in metric units are the standard. The metric values for
ASTM wires are close to the US customary units.
KALE IN
NSPECTIO
ON SERV
VICES DOC. NO. CQEP-R
RT-021
REV. NO.. 00
RADIO
OGRAPH
HIC TESTIING
PAGE Page 12 of
o 32
PROCED
DURE
1.1 Density
The raadiographic density shalll be 2.2 min nimum and 3.53 maximum m HD.
1.2 Sensitivitty
1.2.1 Sensitivityy shall be 2% % or better inn weld area, based on number of source-
side wires visible on raadiographs.
1.2.2 In case, single
s wall single
s image e technique is used an nd IQI canno ot be
places on the source side, an eq quivalent sensitivity sha
all be establiished
during raddiographic qu ualification fo
or film side IQI placement.
1.3 Film Conttrast
The contrast
c of th
he radiograp phs shall be in acceptab ble level as not
n to reducce the
quality
y and mainta ain the required sensitivvity and denssity
graphs shall be free fro
1.4 All radiog om mechaniccal, chemica al or other blemishes
b to
o the
extentt that they may
m mask orr be confuse ed with the image
i of any discontinu
uity in
the area of intterest of the
e object bein ng radiograp phed Such blemishes
b incclude
but not limited to:
1.4.1 Fogging
1.4.2 Water marrks, streaks or chemical stains