Professional Documents
Culture Documents
Installation procedure
Use 1/1531-CNA 403 1452 Rev G
Part 1
Chapter 6.2.1
C:\ebid\install
Refer to the section on Silent Installation in Reference [8] for details on each parameter and
the values they can take. The following parameter must be modified (at a minimum)
CRZ0E-7XX9U28-W10T005-W2K9
ebid_client_install.ini
BOEInstall_0.log
10. Press ENTER
11. A message will appear when installation is completed. It will take 15 minutes. Click OK
Part 2
Chapter 6.2.2 Install Service Packs and FixPacks
See Section 7.2 on page 18
BOE_SP2_Install_0.log
6. Press Enter
The installation of SP2 will fail on windows XP SP3 because SP2 is large windows Installer
patch package.
If the installations fails on windows 2003 install the microsoft patch.
http://support.microsoft.com/kb/925336
In short: HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows\Safer\CodeIdentifiers
Change the registry value PolicyScope from 0 to 1 before starting the installation. When SP2 is
installed change PolicyScope back from 1 to 0.
BOE_FP_2_1_Install_0.log
6. Pres ENTER
7. A message will appear when installation is completed. Click OK
Part 4
Once installation is complete, configure Sybase Open Client as described in Section 8.2 on page 22
7. Verify the installation of the connection by clicking Start > Programs > Sybase >
Connectivity > Open Client Directory Service Editor (Dsedit).
8. Select InterfacesDriver in the list, and click OK
9. Highlight the connection and verify that the attributes have the expected values
A dialog box indicating connection successful should appear. If this dialog does not appear,
then manually update the information in this GUI