Professional Documents
Culture Documents
PLC
PLC
Revision History
1.1. CPU
1.1.1 Error Log
SmartActiveParts_E\P
Storage
Unit type CS/CJ LC\CS_CJ\CS_CJCo Title Error Log
directory
mmon
Function Displays the error log of the CPU Unit.
Display and Operation Details
2 3 4 5
Setting/
No. Item Description
display
Displays the five latest errors in descending chronological order. By scrolling the page, 20 errors in
total will be displayed.
Present errors: Present errors are displayed with red indicators.
1 Error Log Display Date & Time The date and time of each error that occurred are displayed.
Error: Descriptions of errors are displayed.
Code: Error codes are displayed.
Detailed code: Detailed error codes are displayed.
Displays the previous page (for newer errors). If the present page displays the latest error, this button
2 Previous Setting
will be disabled.
Displays the next page (for older errors). If the present page displays the oldest error, this button will
3 Next Setting
be disabled.
4 Read Setting Reads and displays the error logs in descending chronological order.
5 Clear Log Setting Deletes the error log.
Remarks
* When using this Smart Active Part, be sure to select System Setting on the System Tab in the Project Workspace, press the System
Memory List on the Initial Tab Page, and select Basic Operation for $SB.
* Do not use the above display for the start screen.
* Use this display in system version 5 or higher version.
* This cannot be used with CSID (Redundant checkup error message cannot be displayed.)
PLC
1.1.2 Time Data
SmartActiveParts_E\
Storage
Unit type CS/CJ PLC\CS_CJ\CS_CJ Title Time data
directory
Common
Function Displays time data from the CPU Unit.
Display and Operation Details
1
2
3
4
Setting/
No. Item Description
display
1 Time Display Displays the present time.
Displays the startup time.
2 Startup Time Display
The year and month are always “ .”
Power Displays the time of the previous interruption.
3 Display
Interruption The year and month are always “ .”
Program Displays the date and time when the program was overwritten.
4 Display
overwritten The CS1V1 always 0.
Settings Displays the date and time when the settings were overwritten.
5 Display
overwritten The CS1V1 always 0.
Remarks
* When using this Smart Active Part, be sure to select System Setting on the System Tab in the Project Workspace, press the System
Memory List on the Initial Tab Page, and select Basic Operation for $SB.
* Do not use the above display for the start screen.
* Use this display in system version 5.
PLC
1.1.3 Cycle Time Data
SmartActiveParts_E\
Storage
Unit type CS/CJ PLC\CS_CJ\CS_CJ Title Cycle time data
directory
Common
Function Displays the cycle time of CPU Unit.
Display and Operation Details
1
Setting/
No. Item Description
display
Current Cycle
1 Display Displays the current cycle time.
Time
Maximum Cycle
2 Display Displays the maximum cycle time.
Time
Remarks
* This Smart Active Parts operate on System Version 5 or later.
PLC
1.1.4 Battery Replacement
SmartActiveParts_E\PL
Storage
Unit type CS/CJ C\CS_CJ\CS_CJComm Title Battery replacement switch
directory
on
Function Makes battery check and replacement settings.
Display and Operation Details
1
Setting/
No. Item Description
display
Makes battery check and replacement settings.
Setting/
1 Checking battery Battery check in progress: Checks the battery. The button is displayed in gray.
display
Battery replacement in progress: The battery is not checked. The button is lit in yellow.
Remarks
* When using this Smart Active Part, be sure to select System Setting on the System Tab in the Project Workspace, press the System
Memory List on the Initial Tab Page, and select Basic Operation for $SB.
* Do not use the above display for the start screen.
PLC
1.1.5 Change CPU Mode
SmartActiveParts_E\PL
Storage
Unit type CS/CJ C\CS_CJ\CS_CJComm Title Change CPU Mode
directory
on
Function Changes the CPU mode of PLC connected to the NS
Display and Operation Details
1 2 3
Setting/
No. Item Description
display
Set Program Setting/ Press the PRGRM Button to change the CPU mode to the program mode.
1
Mode Button display While the CPU is in the program mode, the button lights yellow.
Set Monitor Setting/ Press the MONITR button to change the CPU mode to the monitor mode.
2
Mode Button display While the CPU is in the monitor mode, the button lights yellow.
Set RUN Setting/ Press the RUN button to change the CPU mode to the run mode.
3 Mode Button display When the CPU is in the run mode, the button lights yellow.
Display Update Blinks each time the display is updated.
4 Display
Indicator While the display is updated, the indicator blinks yellow green.
Remarks
* Use this Smart Active Parts on System Version 6.2 or later.
* CS/CJ Series PLCs are supported.
* Each time the mode is changed, a confirmation and warning message are displayed and buzzer sounds. Make sure to confirm the
messages before you execute.
*Select Recognize “\n” in the message as a line feed code option in the MSGBOX field (PT Menu – Project Properties – Macro Option Tab).
[ Note ]
Confirm that no adverse effect will occur in the system before changing the operation mode of the CPU unit.
PLC
1.1.6 Date and Time Setting
Storage SmartActiveParts_E\PLC
Unit type CS_CJ Title Date and Time Setting
directory \CS_CJ\CS_CJCommon
Sets the PLC internal calendar and NS calendar at the same time.
Function This object allows users to set the calendars to between January 1, 2000 and December 31, 2099.
NS clock data must be stored in BCD format.
Display and Operation Details
1.1.7 Date and Time Synchronization
Storage SmartActiveParts_E\PLC
Unit type CS_CJ Title Date and Time Synchronization
directory \CS_CJ\CS_CJCommon
Synchronizes the NS and PLC calendar (year, month, date, hour, minute and second) every hour.
Function
NS clock data must be stored in BCD format.
Display and Operation Details
2
1
Setting/
No. Item Details
Display
Display Display Displays the last synchronized [year/month/date] and [hour: minute].
1 Synchronized
Date and Time
Display Display Displays whether the synchronization succeeded or failed.
2 Synchronized
status
Remarks
* Use this Smart Active Parts on System Version 6.2 or later.
* CS/CJ Series PLCs are supported.
* NS clock data must be stored in BCD format.
PLC
CJ1M (from Ver5 or Earlier)
1.1.8 Settime PLC®NS
Storage SmartActiveParts_E\PLC\
Unit type CJ1M Title Settime PLC® NS
directory Ver5orEarlier\CJ1M_V1
Display and Operation Details
1
Setting/
No. Item Details
Display
Sets time and date information (year, month, date, time, minute, and second) in the PLC to the
internal clock of PT. A day of the week is calculated by date information in the PT. If a day of the
1 PLC >> NS Setting week and date set in the PLC are not matched, a day of the week calculated by date will be
reflected to the PT so date information for PLC and PT may vary according to preset data in the
PLC.
Remarks
*CS/CJ Series PLCs are supported.
PLC
1.1.9 Settime PLC ® NS
SmartActiveParts_E\
Storage
Unit type CJ1M PLC\Ver5orEarlier\C Title Settime NS ®PLC
directory
J1M_V1
Display and Operation Details
1
Setting/
No. Item Details
Display
Sets time and date information (year, month, date, time, minute, and second) in the PT to the internal
1 NS >> PLC Setting
clock of PLC.
Remarks
*CS/CJ Series PLCs are supported.
PLC
1.1.10 Builtin Input Setting
SmartActiveParts_E\
Storage
Unit type CJ1M PLC\Ver5orEarlier\C Title Builtin Input Setting
directory
J1M_V1
Allocate General Input, Interrupt Input, Quick, or High Speed Counter to bits (from 00 to 09 bits of 2960 words) for CPU Unit
Function
Builtin Input.
Display and Operation Details
1 2
3 4
5
6
Setting/
No. Item Details
Display
High Speed Makes the settings for High Speed Counter 0.
1 Setting
Counter 0
High Speed Makes the settings for High Speed Counter 1.
2 Setting
Counter 1
Input Operation Makes the settings for Builtin Inputs IN 0 to 3.
3 Settings for Setting
Builtin Inputs
4 Constant Input Setting Sets constant when performing general input
5 Read Setting Reads information set in the PLC and display it on the screen
6 Write Setting Writes settings in the screen to the PLC
Remarks
* When Z phase and software reset are selected in the Input Setting for High Speed Counter 0, Z phase (reset input) will be allocated to
IN3.
* When Z phase and software reset are selected in the Input Setting for High Speed Counter 1, Z phase (reset input) will be allocated
IN2.
PLC
1.1.11 Define Origin 1, Define Origin 2
SmartActiveParts_E\
Storage
Unit type CJ1M PLC\Ver5orEarlier\C Title Define Origin 1, Define Origin 2
directory
J1M_V1
Function Makes settings for Origin Search function and Origin Return function.
Display and Operation Details
1
2
3
4
5
Setting/
No. Item Details
Display
1 Origin Search Setting Sets whether the Pulse Output 0/1 Origin Search is used or not.
Parameters for Sets parameters used for Origin Search.
2 Setting
Origin Search
Parameters for Sets parameters used for Origin Return.
3 Setting
Origin Return
4 Read Setting Reads information set in the PLC and display it on the screen
5 Write Setting Writes settings in the screen to the PLC
Remarks
* When selecting ON for Pulse Output 0 Origin Search, interrupt input 0 and 1, PMW output o cannot be used. However, those can be
used for High Speed Counter 0 and 1.
* When selecting ON for Pulse Output 1 Origin Search, it occupies IN2, IN3, and OUT5 besides pulse output so it cannot be used for
other functions.