Professional Documents
Culture Documents
SurroundPanner Option Guide PDF
SurroundPanner Option Guide PDF
Version 9.0
Legal Notices
This guide is copyrighted ©2010 by Avid Technology, Inc.,
(hereafter “Avid”), with all rights reserved. Under copyright
laws, this guide may not be duplicated in whole or in part
without the written consent of Avid.
003, 96 I/O, 96i I/O, 192 Digital I/O, 192 I/O, 888|24 I/O,
882|20 I/O, 1622 I/O, 24-Bit ADAT Bridge I/O, AudioSuite,
Avid, Avid DNA, Avid Mojo, Avid Unity, Avid Unity ISIS,
Avid Xpress, AVoption, Axiom, Beat Detective, Bomb Factory,
Bruno, C|24, Command|8, Control|24, D-Command, D-Control,
D-Fi, D-fx, D-Show, D-Verb, DAE, Digi 002, DigiBase,
DigiDelivery, Digidesign, Digidesign Audio Engine, Digidesign
Intelligent Noise Reduction, Digidesign TDM Bus, DigiDrive,
DigiRack, DigiTest, DigiTranslator, DINR, DV Toolkit, EditPack,
Eleven, EUCON, HD Core, HD Process, Hybrid, Impact,
Interplay, LoFi, M-Audio, MachineControl, Maxim, Mbox,
MediaComposer, MIDI I/O, MIX, MultiShell, Nitris, OMF,
OMF Interchange, PRE, ProControl, Pro Tools M-Powered,
Pro Tools, Pro Tools|HD, Pro Tools LE, QuickPunch, Recti-Fi,
Reel Tape, Reso, Reverb One, ReVibe, RTAS, Sibelius,
Smack!, SoundReplacer, Sound Designer II, Strike, Structure,
SYNC HD, SYNC I/O, Synchronic, TL Aggro, TL AutoPan,
TL Drum Rehab, TL Everyphase, TL Fauxlder, TL In Tune,
TL MasterMeter, TL Metro, TL Space, TL Utilities, Transfuser,
Trillium Lane Labs, Vari-Fi, Velvet, X-Form, and XMON are
trademarks or registered trademarks of Avid Technology, Inc.
Xpand! is Registered in the U.S. Patent and Trademark Office.
All other trademarks are the property of their respective
owners.
Documentation Feedback
At Avid, we are always looking for ways to improve our
documentation. If you have comments, corrections, or
suggestions regarding our documentation, email us at
techpubs@avid.com.
contents
Chapter 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
What’s Included . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
System Requirements and Compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Registration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Conventions Used in This Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
About www.avid.com . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Chapter 2. Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Installing the Surround Panner Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Configuring MIDI and Pro Tools for the Surround Panner Option. . . . . . . . . . . . . . . . . . . . . . . . 3
Enabling the Surround Panner Option in Pro Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Contents iii
chapter 1
Introduction
The Pro Tools® Surround Panner Option from Avid can only assure compatibility and provide
JL Cooper provides a touch-sensitive Joystick for support for hardware and software it has tested
surround panning, along with other output and and approved.
panner controls.
For complete system requirements and a list of
qualified computers, operating systems, hard
drives, and third-party devices, visit:
What’s Included www.avid.com/compatibility
• Surround Panner unit
• Surround Panner Option disc
• Registration Information Card Registration
Review the enclosed Registration Information
Card and follow the instructions on it to quickly
System Requirements and register your purchase online. By registering,
Compatibility you become eligible to receive the following:
• Technical support information
The Surround Panner Option requires:
• Software update and upgrade notices
• A qualified Pro Tools|HD or Pro Tools|HD Na-
• Hardware warranty information
tive system, or Pro Tools system with the
Complete Production Toolkit 2 option.
• The Surround Panner Option Controller Per-
sonality File installed in the Controllers
folder. (See Chapter 2, “Installation.”).
• Available MIDI In and Out connections on a
MIDI interface, to communicate with
Pro Tools.
Introduction 1
Conventions Used in This About www.avid.com
Guide The Avid website (www.avid.com) is your best
All of our guides use the following conventions online source for information to help you get
to indicate menu choices and key commands: the most out of your Pro Tools system. The fol-
:
lowing are just a few of the services and features
Convention Action available.
File > Save Choose Save from the Product Registration Register your purchase
File menu online.
Control+N Hold down the Control
Support and Downloads Contact Avid Customer
key and press the N key
Success (technical support); download software
Control-click Hold down the Control updates and the latest online manuals; browse
key and click the mouse the Compatibility documents for system re-
button
quirements; search the online Knowledge Base
Right-click Click with the right or join the worldwide Pro Tools community on
mouse button the User Conference.
The names of Commands, Options, and Settings Training and Education Study on your own using
that appear on-screen are in a different font. courses available online or find out how you can
learn in a classroom setting at a certified
The following symbols are used to highlight Pro Tools training center.
important information:
Products and Developers Learn about Avid
User Tips are helpful hints for getting the products; download demo software or learn
most from your system. about our Development Partners and their
plug-ins, applications, and hardware.
Important Notices include information that News and Events Get the latest news from Avid
could affect your data or the performance of or sign up for a Pro Tools demo.
your system.
Installation
6 Click Properties.
Installation 3
7 Enable the appropriate Channels for the Re- 4 Enter a name in the Instrument Name field
ceives and Transmits options. and press Enter.
8 Click Apply and close the Properties window. 5 From the Input Port pop-up menu, select the
MIDI In of the Surround Panner Option.
9 In the MIDI Studio window, drag a connection
from the MIDI In of the Surround Panner Op- 6 From the Output Port pop-up menu, select the
tion device to the MIDI Out port on the inter- MIDI Output of the Surround Panner Option.
face that represents the physical connection
between your interface and the Surround Pan- See the User Guide that came with your
ner. system for more information about MIDI
Studio Setup.
10 In the MIDI Studio window, drag a connec-
tion from the MIDI Out of the Surround Panner
Option device to the MIDI In port on the inter-
face that represents the physical connection be-
Enabling the Surround Panner
tween your interface and the Surround Panner. Option in Pro Tools
11 Choose Audio MIDI Setup > Quit Audio MIDI To enable the Surround Panner Option in Pro Tools:
Setup.
1 Launch Pro Tools.
See the User Guide that came with your 2 Choose Setup > Peripherals and click the MIDI
system for more information about Audio Controllers tab.
MIDI Setup.
3 From the Type pop-up menu, select Surround
Panner.
Configuring MIDI Studio Setup
(Windows Only) 4 Choose the Surround Panner (or its MIDI
ports) in the Receive From and Send To pop-up
On Windows systems, use MIDI Studio Setup to menus.
configure MIDI communication with the Sur-
5 Click OK.
round Panner Option.
MSS automatically finds the MIDI ports on Sur- Once the Surround Panner has been en-
round Panner Option, and lets you specify a cus- abled in the Peripherals dialog, you can
tom name for each port on the Surround Panner also disable (and re-enable) it in the Input
Option within the MIDI Studio Setup docu- Devices dialog (Setup > MIDI > Input De-
ment. vices). See the Pro Tools Reference Guide
for more information.
To define a MIDI port on the Surround Panner
Option with MIDI Studio Setup:
1 Launch Pro Tools.
3 Click Create.
Rear Divergence/
Volume encoder
Rear Position encoder
Joystick
If a mono track is targeted after selecting The Volume encoder controls the track’s vol-
Right Pan on a stereo track, you will need to ume if the track’s Output window is targeted.
manually deselect the Right Pan switch to When any of the track’s sends is targeted, the
enable the Joystick to control the panner on Volume encoder will control the send’s volume.
the mono track. The other encoders are mapped to control either
Divergence/Center % or Position/LFE parame-
Divergence/Center % Switch and LED
ters, depending on whether the
When the Div/Ctr % switch is enabled, rotary Divergence/Center % switch is enabled or dis-
encoders control the Diversion and Center % abled.
parameters. When the switch is disabled, rotary
encoders control Position/LFE.
Divergence/Center % Mode
The switch’s LED is lit in Div/Ctr % mode. Mapping
(Div/Ctr % Enabled)
Mute Switch and LED
In Div/Ctr % mode (Div/Ctr % switch enabled),
The Mute switch mutes either the track or send the encoders determine the width of the panned
output that the panner is assigned to. The signal with respect to neighboring speakers, as
switch’s LED is lit when the track or switch is follows:
muted.
Front Div (Front Divergence) Provides separate
divergence control over the front speakers.
Press the Target Up or Target Down switch to When only one peripheral (such as a Surround
scroll through the track’s currently available Panner Option or a control surface) has targeted
main output and send panners. a panner, the outline color is based on the posi-
tion in which the peripheral was declared in the
To focus the previous or next track: Peripherals dialog.
Press the Prev Track or Next Track switch.
When more than one peripheral targets the
same Output or Send, its display will be outlined
You can also focus a track by clicking on the
in white.
Output window of the track or send with a
mouse.
Outline Color
Order Peripheral Was Declared in the Peripherals Dialog
(for Panner Targeted by One Peripheral)
mode.
Compliance Information
Proposition 65 Warning
Environmental Compliance
This product contains chemicals, including lead,
Disposal of Waste Equipment by Users known to the State of California to cause cancer and
birth defects or other reproductive harm. Wash hands
in the European Union after handling.
Perchlorate Notice
This product may contain a lithium coin battery. The State of
California requires the following disclosure statement:
“Perchlorate Material – special handling may apply, See
www.dtsc.ca.gov/hazardouswaste/perchlorate.”
This symbol on the product or its packaging indicates that this Recycling Notice
product must not be disposed of with other waste. Instead, it
is your responsibility to dispose of your waste equipment by
handing it over to a designated collection point for the recycling
of waste electrical and electronic equipment. The separate
collection and recycling of your waste equipment at the time of
disposal will help conserve natural resources and ensure that
it is recycled in a manner that protects human health and the
environment. For more information about where you can drop
off your waste equipment for recycling, please contact your
local city recycling office or the dealer from whom you
purchased the product.
Compliance Information 15
Australian Compliance
EMC (Electromagnetic
Compliance)
Avid declares that this product complies with the following
standards regulating emissions and immunity:
• FCC Part 15 Class A
• EN55103 – 1, environment E4 Avid
• EN55103 – 2, environment E4
• AS/NZS 3548 Class A
• CISPR 22 Class A Canadian Compliance
• ICES-003 Class A
This Class A digital apparatus complies with Canadian
ICES-003
FCC Compliance for United States Cet appareil numérique de la classe A est conforme à la norme
NMB-003 du Canada
Radio and Television Interference
This equipment has been tested and found to comply with the
Taiwan Compliance
limits for a Class A digital device, pursuant to Part 15 of the
FCC Rules.
DECLARATION OF CONFORMITY
We, Avid, 75 Network Drive
Burlington, MA 01803, USA
650-731-6300
declare under our sole responsibility that the product
Surround Panner Option
complies with Part 15 of FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and CE Compliance
(2) this device must accept any interference received,
including interference that may cause undesired operation. (EMC and Safety)
Communication Statement
NOTE: This equipment has been tested and found to comply
with the limits for a Class A digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a Avid is authorized to apply the CE (Conformité Europénne)
residential installation. This equipment generates, uses, mark on this compliant equipment thereby declaring conformity
and can radiate radio frequency energy and, if not installed to EMC Directive 89/336/EEC and Low Voltage Directive
and used in accordance with the instructions, may cause 2006/95/EEC.
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try and correct the interference by one or
more of the following measures:
• Reorient or locate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
Any modifications to the unit, unless expressly approved by
Avid, could void the user's authority to operate the
equipment.
Compliance Information 17
Avid Technical Support (USA) Product Information
2001 Junipero Serra Boulevard Visit the Online Support Center at For company and product information,
Daly City, CA 94014-3886 USA www.avid.com/support visit us on the web at www.avid.com