Professional Documents
Culture Documents
The high performance and high density 802.11ac 310 Series UNIQUE BENEFITS
supports 160 MHz channel bandwidth (VHT160), multi-user • Dual Radio 802.11ac access point with Multi-User MIMO
MIMO (MU-MIMO) and 4 spatial streams (4SS). It provides --Supports up to 1,733Mbps in the 5GHz band (with
simultaneous multicast data transmission to multiple 4SS/VHT80 or 2SS/VHT160 clients) and up to 400 Mbps
devices, maximizing data throughput and improving in the 2.4 GHz band (with 2SS/VHT40 clients).
network efficiency. • Built-in Bluetooth Low-Energy (BLE) radio
--Enables location based services with BLE-enabled
The 310 Series includes the enhanced ClientMatch technology
mobile devices receiving signals from multiple Aruba
that extends the client steering technology with MU-MIMO
Beacons at the same time.
client awareness. It automatically identifies MU-MIMO capable
• Advanced Cellular Coexistence (ACC)
mobile devices and steers those devices to the closest
--Minimizes interference from 3G/4G cellular networks,
MU-MIMO capable Aruba access point. By grouping
distributed antenna systems, and commercial small
MU-MIMO capable mobile devices together, the network
cell/femtocell equipment.
starts taking advantage of the simultaneous transmission to
• Quality of service for unified communication apps
these devices, increasing its overall capacity. These dynamic
--Supports priority handling and policy enforcement for
roaming policies that are based on device types, help users
unified communication apps, including Microsoft Skype
achieve the best WLAN performance in a mixed device
for Business with encrypted videoconferencing, voice,
environment during the technology transition period.
chat, and desktop sharing.
DATA SHEET
ARUBA 310 SERIES ACCESS POINTS
• Support for up to 255 associated client devices per radio, • 802.11n high-throughput (HT) support: HT 20/40
and up to 16 BSSIDs per radio • 802.11ac very high throughput (VHT) support:
• Supported frequency bands (country-specific VHT 20/40/80/160
restrictions apply): • 802.11n/ac packet aggregation: A-MPDU, A-MSDU
--2.400 to 2.4835 GHz
WI-FI ANTENNAS
--5.150 to 5.250 GHz
--5.250 to 5.350 GHz • AP-314/IAP-314: Four RP-SMA connectors for external
--5.470 to 5.725 GHz dual band antennas. Worst-case internal loss between
--5.725 to 5.850 GHz radio interface and external antenna connectors (due to
• Available channels: Dependent on configured diplexing circuitry): 0.6dB in 2.4 GHz and 1.2dB in 5 GHz.
• Dynamic frequency selection (DFS) optimizes the use of omni-directional antennas for 4x4 MIMO with maximum
available RF spectrum. antenna gain of 3.1dBi in 2.4 GHz and 5.0dBi in 5 GHz.
• Supported radio technologies: Built-in antennas are optimized for horizontal ceiling
--802.11b: Direct-sequence spread-spectrum (DSSS) mounted orientation of the AP. The downtilt angle for
• Supported modulation types: patterns for all elements operating in the same band is
--802.11b: BPSK, QPSK, CCK 3.9dBi in 2.4 GHz and 5.7dBi in 5 GHz.
--2.4 GHz band: +18 dBm per chain --802.3az Energy Efficient Ethernet (EEE)
--5 GHz band: +18 dBm per chain • USB 2.0 host interface (Type A connector)
--Note: conducted transmit power levels exclude antenna • Bluetooth Low Energy (BLE) radio
gain. For total (EIRP) transmit power, add antenna gain --Up to 3dBm transmit power (class 2) and -91dBm
interference from cellular networks. --Integrated antenna with roughly 30 degrees downtilt
• Maximum ratio combining (MRC) for improved and peak gain of 3.4dBi (AP-314/IAP-314) or 1.5dBi
• Cyclic delay/shift diversity (CDD/CSD) for improved • Visual indicators (multi-color LEDs): For system and
• Short guard interval for 20-MHz, 40-MHz, 80-MHz and • Reset button: Factory reset (during device power up)
• Space-time block coding (STBC) for increased range and cable available)
• Supported data rates (Mbps): • When both power sources are available, DC power takes
--802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 • Power sources are sold separately
--802.11n: 6.5 to 600 (MCS0 to MCS31) • Direct DC source: 12Vdc nominal, +/- 5%
--802.11ac: 6.5 to 1,733 (MCS0 to MCS9, NSS = 1 to 4 for --Interface accepts 2.1/5.5-mm center-positive circular
ENVIRONMENTAL
• Operating:
--Temperature: 0° C to +50° C (+32° F to +122° F)
--Humidity: 5% to 95% non-condensing
• Storage and transportation:
--Temperature: -40° C to +70° C (-40° F to +158° F)
DATA SHEET
ARUBA 310 SERIES ACCESS POINTS
RF PERFORMANCE TABLE
Maximum capability of the hardware provided (excluding antenna gain). Maximum transmit power is limited by local regulatory settings.
DATA SHEET
ARUBA 320 SERIES ACCESS POINTS
ORDERING INFORMATION
ORDERING INFORMATION
AP-AC-12V30B 12V/30W AC-to-DC Desktop Style Power Adapter with Type B DC plug (2.1/5.5/9.5mm circular, 90-degree
angled). Note: does not include country specific AC power cord (PC-AC-xx).
PD-3501G-AC 15.4W 802.3af PoE midspan injector, 10/100/1000BASE-T Ethernet. Note: does not include country specific
AC power cord (PC-AC-xx)
PD-9001GR-AC 30W 802.3at PoE midspan injector, 10/100/1000BASE-T Ethernet. Note: does not include country specific
AC power cord (PC-AC-xx)
Antennas See info on Aruba website for antenna part numbers
www.arubanetworks.com DS_AP310Series_042516