Professional Documents
Culture Documents
Transfer Pump CS
PROCESS
Technical Index
Pump ID Meaning
CS 260 / 5
(model) (Impeller Ø in mm) (Impeller tip width
in mm)
Stationary pump
for liquid transfer
Applications
Road tankers
Up to 36 bars / 520
Design pressure
PSI
Performance
Test Procedure
Each pump manufactured by CRYO-
STAR is mechanically and cryogeni- Head (m) Pump efficiency
cally tested prior to shipment in our 310 1
state-of-the-art testing facility to
0.9
ensure that performance meets cus-
tomer specification. The precision of 250 0.8
measuring devices provides essential 0.7
results : differential head, flow rate, 200
seal gas consumption, pump efficien- 0.6
cy, NPSH, noise and vibration levels 0.5
– all documented and submitted to
the customer. 0.4
110
0.3
0.2
50
Quality 0.1
0
esigned in compliance with guide-
D 150 200 250 300 350 400 450 500 550
lines like IGC 11/82 norm Flow (l/min)
Features
1 Composite Cryostar type mechanical seal: 4 times 5 The speed of the pump can be adjusted throw the
longer life time than standard carbon seals variable speed motor
2 High hydraulic efficiency closed impeller. 6 The pump is working at a very low noise level
3 Helical inducer allowing low required NPSH 7 ALLEN BRADLEY or VACON frequency variator, with
a power capacity up to 37 KW, and an intensity up
4 Direct coupled pump without gearbox avoiding use to 72 A
of oil
1
4
Volute separated from the electrical motor by an open intermediate piece with 4 hollow arms. This intermediate
piece only presents 4 contacts points for low thermal conductivity.