Professional Documents
Culture Documents
90016701_1.0
Flygt 3127
60 Hz
Table of Contents
Table of Contents
1 D-pump........................................................................................................................................ 2
1.1 Product description............................................................................................................. 2
1.2 Motor rating and performance curves.............................................................................. 4
4 M-pump..................................................................................................................................... 25
4.1 Product description........................................................................................................... 25
4.2 Motor rating and performance curves............................................................................ 27
1 D-pump
1.1 Product description
Usage
A submersible pump, with vortex hydraulic, for liquids containing solids and abrasive
media, or light wastewater.
Denomination
Type Non-explosion proof Explosion proof Pressure class Installation types
version version
Gray iron 3127.182 3127.091 • MT — Medium P, S, X
head
• HT — High head
Motor data
Feature Description
Motor type Squirrel-cage induction motor
Frequency 60 Hz
Feature Description
Power supply 3-phase
Starting method • Direct on-line
• Star-delta
• Soft starter
• Variable Frequency Drive (VFD)
Number of starts per hour Maximum 30
Code compliance IEC 60034-1
Voltage variation • Continuously running: Maximum ±5%
• Intermittent running: Maximum ±10%
Voltage imbalance between Maximum 2%
phases
Stator insulation class H (180°C, 356°F)
Motor encapsulation
Motor encapsulation is in accordance with IP68.
Cables
Application Type
Direct-on-line start Flygt SUBCAB® - a heavy duty 4 cores motor power cable
with two twisted pair screened control cores. Conductor
insulation rating of 90°C, which allows for increased
current. Superior mechanical strength and high abrasion
and tear resistant. Chemical resistant within pH 3-10 and
ozone, oil, and flame resistant. Used up to 70°C water
temperature. Cables < 10 mm2 with unscreened control
cores.
Y/D start Screened Flygt SUBCAB® - a heavy duty 4 screened cores
motor power cable with four twisted pair screened
control cores. Conductor insulation rating of 90°C, which
allows for increased current. Superior mechanical
strength and high abrasion and tear resistant. Chemical
resistant within pH 3-10 and ozone, oil, and flame
resistant. Used up to 70°C water temperature.
Variable Frequency drive Screened Flygt SUBCAB® - a heavy duty 4 screened cores
motor power cable with four twisted pair screened
control cores. Conductor insulation rating of 90°C, which
allows for increased current. Superior mechanical
strength and high abrasion and tear resistant. Chemical
resistant within pH 3-10 and ozone, oil, and flame
resistant. Used up to 70°C water temperature.
Monitoring equipment
Thermal contacts opening temperature 125°C (257°F)
Materials
Surface treatment
Priming Finish
Painted with a primer, see internal standard Navy gray color NCS 5804-B07G. Two-component high-
M0700.00.0002 solid top coating, see internal standard M0700.00.0004
for standard painting and M0700.00.0008 for special
painting.
Options
• Warm liquid version (non-explosion proof versions)
• Leakage sensor in the stator housing (FLS)
• Leakage sensor in the oil housing (CLS)
• Surface treatment (Epoxy)
• Zinc anodes
• Other cables
Accessories
Discharge connections, adapters, hose connections, and other mechanical accessories
Electrical accessories such as pump controller, control panels, starters, monitoring relays,
cables
MT
P2[hp] / [kW]
12
8 447
447
472
472
8 6 448
448
449
449
4
4
2
0 0
H [ft] / [m]
60
MT
18
16
50
14
40 12
10
30
8
20 6
4
10 472
472
2 449
449 448
448 447
447
0 0
0 10 20 30 40 50
0 100 200 300 400 500 600 700 800 900
Q [l/s] / [usgpm]
WS005076C
HT
P2[hp] / [kW]
12
288
288
8
10 289
289
8 6
6
4
4
H [ft] / [m]
90 HT
80 25
70
20
60
50 15
40
10
30
20
5 288
288
289
289
10
0 0
0 5 10 15 20 25 30
0 100 200 300 400 500
Q [l/s] / [usgpm]
WS009132A
Usage
A submersible pump for liquid manure, or heavily contaminated sewage and sludge. The
impeller is S-shaped and has a cutting function. The pump is protected by a break pin.
Denomination
Type Non-explosion proof Explosion proof Installation types Installation types
version version
Chopper 3127.182 3127.091 • LT — Low head J, P, S, X
Gray iron
Motor data
Feature Description
Motor type Squirrel-cage induction motor
Frequency 60 Hz
Power supply 1-phase or 3-phase
Starting method • Direct on-line
• Star-delta
• Soft starter
• Variable Frequency Drive (VFD)
Number of starts per hour Maximum 30
Code compliance IEC 60034-1
Voltage variation • Continuously running: Maximum ±5%
• Intermittent running: Maximum ±10%
Voltage imbalance between Maximum 2%
phases
Stator insulation class H (180°C, 356°F)
Cables
Application Type
Direct-on-line start Flygt SUBCAB® - a heavy duty 4 cores motor power cable
with two twisted pair screened control cores. Conductor
insulation rating of 90°C, which allows for increased
current. Superior mechanical strength and high abrasion
and tear resistant. Chemical resistant within pH 3-10 and
ozone, oil, and flame resistant. Used up to 70°C water
temperature. Cables < 10 mm2 with unscreened control
cores.
Y/D start Flygt SUBCAB® - a heavy duty 7 cores motor power cable
with two twisted pair screened control cores. Conductor
insulation rating of 90°C, which allows for increased
current. Superior mechanical strength and high abrasion
and tear resistant. Chemical resistant within pH 3-10 and
ozone, oil, and flame resistant. Used up to 70°C water
temperature. Cables < 7G6 mm2 with unscreened
control cores.
Variable Frequency drive Screened Flygt SUBCAB® - a heavy duty 4 screened cores
motor power cable with four twisted pair screened
control cores. Conductor insulation rating of 90°C, which
allows for increased current. Superior mechanical
strength and high abrasion and tear resistant. Chemical
resistant within pH 3-10 and ozone, oil, and flame
resistant. Used up to 70°C water temperature.
Monitoring equipment
Thermal contacts opening temperature 125°C (257°F)
Materials
Surface treatment
Priming Finish
Painted with a primer, see internal standard Navy gray color NCS 5804-B07G. Two-component high-
M0700.00.0002 solid top coating, see internal standard M0700.00.0004
for standard painting and M0700.00.0008 for special
painting.
Options
• Warm liquid version (non-explosion proof versions)
• Leakage sensor in the stator housing (FLS)
• Leakage sensor in the oil housing (CLS)
• Aqua cutting knife (chopper)
pressure class LT
• Surface treatment (Epoxy)
• Zinc anodes
• Other cables
Accessories
Discharge connections, adapters, hose connections, and other mechanical accessories
Electrical accessories such as pump controller, control panels, starters, monitoring relays,
cables
Usage
A submersible chopper pump for liquid manure, fish waste, or heavily contaminated
sewage and sludge. The N-hydraulic is fitted with a cutting insert ring. Both impeller and
insert ring are manufactured in Hard-Iron™.
Denomination
Type Non-explosion proof Explosion proof Pressure class Installation
version version types
Chopper 3127.350 3127.390 MT — Medium head P, S, T, Z, X
Hard-Iron™ HT — High head
SH — Super head
Motor data
Feature Description
Motor type Squirrel-cage induction motor
Feature Description
Frequency 60 Hz
Power supply 1-phase or 3-phase
Starting method • Direct on-line
• Star-delta
• Soft starter
• Variable Frequency Drive (VFD)
Number of starts per hour Maximum 30
Code compliance IEC 60034-1
Voltage variation • Continuously running: Maximum ±5%
• Intermittent running: Maximum ±10%
Voltage imbalance between Maximum 2%
phases
Stator insulation class H (180°C, 356°F)
Cables
Application Type
Direct-on-line start Flygt SUBCAB® - a heavy duty 4 cores motor power cable
with two twisted pair screened control cores. Conductor
insulation rating of 90°C, which allows for increased
current. Superior mechanical strength and high abrasion
and tear resistant. Chemical resistant within pH 3-10 and
ozone, oil, and flame resistant. Used up to 70°C water
temperature. Cables < 10 mm2 with unscreened control
cores.
Y/D start Flygt SUBCAB® - a heavy duty 7 cores motor power cable
with two twisted pair screened control cores. Conductor
insulation rating of 90°C, which allows for increased
current. Superior mechanical strength and high abrasion
and tear resistant. Chemical resistant within pH 3-10 and
ozone, oil, and flame resistant. Used up to 70°C water
temperature. Cables < 7G6 mm2 with unscreened
control cores.
Variable Frequency drive Screened Flygt SUBCAB® - a heavy duty 4 screened cores
motor power cable with four twisted pair screened control
cores. Conductor insulation rating of 90°C, which allows
for increased current. Superior mechanical strength and
high abrasion and tear resistant. Chemical resistant
within pH 3-10 and ozone, oil, and flame resistant. Used
up to 70°C water temperature.
Monitoring equipment
Thermal contacts opening temperature 125°C (257°F)
Materials
Surface treatment
Priming Finish
Painted with a primer, see internal standard Navy gray color NCS 5804-B07G. Two-component high-
M0700.00.0002 solid top coating, see internal standard M0700.00.0004
for standard painting and M0700.00.0008 for special
painting.
Options
• Warm liquid version (non-explosion proof versions)
• Leakage sensor in the stator housing (FLS)
• Leakage sensor in the oil housing (CLS)
• Aqua cutting knife (chopper)
pressure class MT
• Surface treatment (Epoxy)
• Zinc anodes
• Other cables
Accessories
Discharge connections, adapters, hose connections, and other mechanical accessories
Electrical accessories such as pump controller, control panels, starters, monitoring relays,
cables
LT
P2[hp] / [kW]
10
7 491
493
8 6
492
5
6
4
H [ft] / [m]
45
LT
40 12
35
10
30
8
25
20 6
15
4
491
10 492
493
2
5
0 0
0 10 20 30 40 50 60
Rated power, Rated power, Curve/ Revolutions Rated Starting Power factor, Installation
kW hp Impeller No per minute, current, A current, A cos φ
rpm
5.6 7.5 492 1750 9.9 62 0.85 J,P,S,X
7.5 10 491 1735 13 80 0.85 J,P,S,X
7.5 10 492 1735 13 80 0.85 J,P,S,X
7.5 10 493 1735 13 80 0.85 J,P,S,X
Rated power, Rated power, Curve/ Revolutions Rated Starting Power factor, Installation
kW hp Impeller No per minute, current, A current, A cos φ
rpm
5.6 7.5 492 1745 30 66 0.96 J,P,S,X
MT
P2[hp] / [kW]
16
10
12
8 428
438
8 6 429
439
4
4
H [ft] / [m]
90 MT
80 25
70
20
60
50 15
40
10
30
20
5 429
428
438
10 439
0 0
0 10 20 30 40 50 60 70
0 200 400 600 800 1000 1200
Q [l/s] / [usgpm]
WS005086B
Rated power, Rated power, Curve/ Revolutions Rated Starting Power factor, Installation
kW hp Impeller No per minute, current, A current, A cos φ
rpm
7.5 10 428 1735 13 80 0.85 P,S,T,X,Z
7.5 10 429 1735 13 80 0.85 P,S,T,X,Z
7.5 10 438 1735 13 80 0.85 P,S,T,X,Z
7.5 10 439 1735 13 80 0.85 P,S,T,X,Z
P2[hp] / [kW]
9
8 6
429
439
7
5
6
4
5
H [ft] / [m]
MT
16
50
14
40 12
10
30
8 429
439
20 6
4
10
2
0 0
0 10 20 30 40 50
0 100 200 300 400 500 600 700 800 900
Q [l/s] / [usgpm]
WS005087B
Rated power, Rated power, Curve/ Revolutions Rated Starting Power factor, Installation
kW hp Impeller No per minute, current, A current, A cos φ
rpm
5.6 7.5 429 1745 30 66 0.96 P,S,X
5.6 7.5 439 1745 30 66 0.96 P,S,X
HT
P2[hp] / [kW]
16
10
12
8 477
487 478
488
8 6 479
489
4
4
H [ft] / [m]
90 HT
80 25
477
487
70
20
60
50 15
40 478
488
10
30
20
5
479
10 489
0 0
0 10 20 30 40 50 60 70
0 200 400 600 800 1000 1200
Q [l/s] / [usgpm]
WS005088B
Rated power, Rated power, Curve/ Revolutions Rated Starting Power factor, Installation
kW hp Impeller No per minute, current, A current, A cos φ
rpm
5.6 7.5 479 1750 9.9 62 0.85 P,S,T,X,Z
5.6 7.5 489 1750 9.9 62 0.85 P,S,T,X,Z
7.5 10 477 1735 13 80 0.85 P,S,T,X,Z
7.5 10 478 1735 13 80 0.85 P,S,T,X,Z
7.5 10 487 1735 13 80 0.85 P,S,T,X,Z
7.5 10 488 1735 13 80 0.85 P,S,T,X,Z
P2[hp] / [kW]
9
8 6
479
7 489
5
6
4
5
H [ft] / [m]
HT
16
50
14
40 12
10
30
8
20 6
4 479
489
10
2
0 0
0 10 20 30 40 50
0 100 200 300 400 500 600 700 800 900
Q [l/s] / [usgpm]
WS005089B
Rated power, Rated power, Curve/ Revolutions Rated Starting Power factor, Installation
kW hp Impeller No per minute, current, A current, A cos φ
rpm
5.6 7.5 479 1745 30 66 0.96 P,S,X
SH
P2[hp] / [kW]
12 9
8
10
7 243/248
8 6
5 244/249
6
H [ft] / [m]
140 SH
40
120
35
100 30
80 25
20
60
15
40
10
243/248
20
5 244/249
0 0
0 5 10 15 20 25 30 35
Figure 1: 3–phase
Rated power, Rated power, Curve/ Revolutions Rated Starting Power factor, Installation
kW hp Impeller No per minute, current, A current, A cos φ
rpm
8.2 11 243 3510 13 120 0.88 P,S,T,X,Z
8.2 11 244 3510 13 120 0.88 P,S,T,X,Z
8.2 11 248 3510 13 120 0.88 P,S,T,X,Z
8.2 11 249 3510 13 120 0.88 P,S,T,X,Z
Usage
A submersible chopper pump for liquid manure, fish waste, or heavily contaminated
sewage and sludge. The N-hydraulic is fitted with a cutting insert ring. Both impeller and
insert ring are manufactured in Hard-Iron™.
Denomination
Type Non-explosion proof Explosion proof Pressure class Installation types
version version
Chopper 3127.840 3127.850 MT — Medium head P, S, T, Z, X
Hard-Iron™ HT — High head
SH — Super head
Feature Description
Liquid density Maximum 1100 kg/m3
Motor data
Feature Description
Motor type Line started permanent magnet motor (LSPM)
Frequency 60 Hz
Power supply 3-phase
Starting method • Direct on-line
• Star-delta
• Soft starter
• Variable Frequency Drive (VFD)
Number of starts per hour Maximum 30
Code compliance IEC 60034-1
Voltage variation • Continuously running: Maximum ±5%
• Intermittent running: Maximum ±10%
Voltage imbalance between Maximum 2%
phases
Stator insulation class H (180°C, 356°F)
Cables
Application Type
Direct-on-line start Flygt SUBCAB® - a heavy duty 4 cores motor power cable
with two twisted pair screened control cores. Conductor
insulation rating of 90°C, which allows for increased
current. Superior mechanical strength and high abrasion
and tear resistant. Chemical resistant within pH 3-10 and
ozone, oil, and flame resistant. Used up to 70°C water
temperature. Cables < 10 mm2 with unscreened control
cores.
Y/D start Flygt SUBCAB® - a heavy duty 7 cores motor power cable
with two twisted pair screened control cores. Conductor
insulation rating of 90°C, which allows for increased
current. Superior mechanical strength and high abrasion
and tear resistant. Chemical resistant within pH 3-10 and
ozone, oil, and flame resistant. Used up to 70°C water
temperature. Cables < 7G6 mm2 with unscreened
control cores.
Variable Frequency drive Screened Flygt SUBCAB® - a heavy duty 4 screened cores
motor power cable with four twisted pair screened
control cores. Conductor insulation rating of 90°C, which
allows for increased current. Superior mechanical
strength and high abrasion and tear resistant. Chemical
resistant within pH 3-10 and ozone, oil, and flame
resistant. Used up to 70°C water temperature.
Monitoring equipment
• Thermal contacts opening temperature 125°C (257°F)
Materials
Surface treatment
Priming Finish
Painted with a primer, see internal standard Navy gray color NCS 5804-B07G. Two-component high-
M0700.00.0002 solid top coating, see internal standard M0700.00.0004
for standard painting and M0700.00.0008 for special
painting.
Options
• Leakage sensor in the stator housing (FLS)
• Leakage sensor in the oil housing (CLS)
• Aqua cutting knife (chopper)
pressure class MT
• Surface treatment (Epoxy)
• Zinc anodes
• Other cables
Accessories
Discharge connections, adapters, hose connections, and other mechanical accessories
Electrical accessories such as pump controller, control panels, starters, monitoring relays,
cables
8
10 428/438
7
8 6 429/439
5
6
H [ft] / [m]
MT
16
50
14
40 12
10
30
8
20 6
428/438
4 429/439
10
2
0 0
0 10 20 30 40 50 60 70
0 200 400 600 800 1000 1200
Q [l/s] / [usgpm]
WS004733A
Figure 2: 3–phase
Rated power, Rated power, Curve/ Revolutions Rated Starting Power factor, Installation
kW hp Impeller No per minute, current, A current, A cos φ
rpm
6.5 8.7 429 1800 9.5 80 0.93 T,Z
6.5 8.7 439 1800 9.5 80 0.93 T,Z
8.2 11 428 1800 12 80 0.93 P,S,X
8.2 11 428 1800 12 80 0.93 T,Z
8.2 11 429 1800 12 80 0.93 P,S,X
8.2 11 438 1800 12 80 0.93 P,S,X
8.2 11 438 1800 12 80 0.93 T,Z
8.2 11 439 1800 12 80 0.93 P,S,X
HT
P2[hp] / [kW]
16
10
12 478/488
477/487
8
8 6 479/489
4
4
H [ft] / [m]
HT
100 30
80 25 477/487
20
60
15
478/488
40
10
20
5 479/489
0 0
0 10 20 30 40 50
0 100 200 300 400 500 600 700 800 900
Q [l/s] / [usgpm]
WS004734A
Figure 3: 3–phase
Rated power, Rated power, Curve/ Revolutions Rated Starting Power factor, Installation
kW hp Impeller No per minute, current, A current, A cos φ
rpm
6.3 8.5 479 1800 9.3 80 0.92 P,S,X
6.3 8.5 489 1800 9.3 80 0.92 P,S,X
6.5 8.7 479 1800 9.5 80 0.93 T,Z
6.5 8.7 489 1800 9.5 80 0.93 T,Z
8.2 11 477 1800 12 80 0.93 T,Z
8.2 11 477 1800 12 80 0.93 P,S,X
8.2 11 478 1800 12 80 0.93 T,Z
8.2 11 478 1800 12 80 0.93 P,S,X
8.2 11 479 1800 12 80 0.93 P,S,X
8.2 11 487 1800 12 80 0.93 T,Z
8.2 11 487 1800 12 80 0.93 P,S,X
8.2 11 488 1800 12 80 0.93 P,S,X
8.2 11 488 1800 12 80 0.93 T,Z
8.2 11 489 1800 12 80 0.93 P,S,X
SH
P2[hp] / [kW]
12 9
8
10 243/248
7
8 6
244/249
5
6
H [ft] / [m]
160
SH
45
140
40
120
35
100 30
80 25
20
60
15
40
10
243/248
20 5 244/249
0 0
0 5 10 15 20 25 30 35
0 100 200 300 400 500 600
Q [l/s] / [usgpm]
WS004735A
Figure 4: 3–phase
4 M-pump
4.1 Product description
Usage
A submersible pump for wastewater containing solids that need to be macerated. The
impeller is equipped with a grinder device.
Denomination
Type Non-explosion proof Explosion proof Pressure class Installation types
version version
Gray iron 3127.170 3127.890 LT — Low head F, P
Grinder HT — High head
Motor data
Feature Description
Motor type Squirrel-cage induction motor
Frequency 60 Hz
Power supply 1-phase or 3-phase
Starting method • Direct on-line
• Star-delta
• Soft starter
Number of starts per hour Maximum 30
Feature Description
Code compliance IEC 60034-1
Voltage variation • Continuously running: Maximum ±5%
• Intermittent running: Maximum ±10%
Voltage imbalance between Maximum 2%
phases
Stator insulation class H (180°C, 356°F)
Cables
Application Type
Direct-on-line start Flygt SUBCAB® - a heavy duty 4 cores motor power cable
with two twisted pair screened control cores. Conductor
insulation rating of 90°C, which allows for increased
current. Superior mechanical strength and high abrasion
and tear resistant. Chemical resistant within pH 3-10 and
ozone, oil, and flame resistant. Used up to 70°C water
temperature. Cables < 10 mm2 with unscreened control
cores.
Y/D start Flygt SUBCAB® - a heavy duty 7 cores motor power cable
with two twisted pair screened control cores. Conductor
insulation rating of 90°C, which allows for increased
current. Superior mechanical strength and high abrasion
and tear resistant. Chemical resistant within pH 3-10 and
ozone, oil, and flame resistant. Used up to 70°C water
temperature. Cables < 7G6 mm2 with unscreened
control cores.
Monitoring equipment
Thermal contacts opening temperature 125°C (257°F)
Materials
Surface treatment
Priming Finish
Painted with a primer, see internal standard Navy gray color NCS 5804-B07G. Two-component high-
M0700.00.0002 solid top coating, see internal standard M0700.00.0004
for standard painting and M0700.00.0008 for special
painting.
Options
• Leakage sensor in the stator housing (FLS)
• Leakage sensor in the oil housing (CLS)
• Surface treatment (Epoxy)
• Zinc anodes
• Other cables
Accessories
Discharge connections, adapters, hose connections, and other mechanical accessories
Electrical accessories such as pump controller, control panels, starters, monitoring relays,
cables
H [ft] / [m]
LT
100 30
80 25
20
60
15
40
10
20
5
212
216
0 0
0 2 4 6 8 10 12
WS005079B
Rated power, Rated power, Curve/ Revolutions Rated Starting Power factor, Installation
kW hp Impeller No per minute, current, A current, A cos φ
rpm
8.2 11 212 3510 13 120 0.88 F,P
8.2 11 216 3510 13 120 0.88 F,P
Rated power, Rated power, Curve/ Revolutions Rated Starting Power factor, Installation
kW hp Impeller No per minute, current, A current, A cos φ
rpm
7 9.4 216 3430 38 134 1 F,P
HT
P2[hp] / [kW]
12 9
8
10 262
7
266
8 6
5
6
H [ft] / [m]
180 HT
160 50
140
40
120
100 30
80
20
60
40 266 262
10
20
0 0
0 1 2 3 4 5 6
0 20 40 60 80 100
Q [l/s] / [usgpm]
WS005080B
Rated power, Rated power, Curve/ Revolutions Rated Starting Power factor, Installation
kW hp Impeller No per minute, current, A current, A cos φ
rpm
8.2 11 262 3510 13 120 0.88 F,P
8.2 11 266 3510 13 120 0.88 F,P
Rated power, Rated power, Curve/ Revolutions Rated Starting Power factor, Installation
kW hp Impeller No per minute, current, A current, A cos φ
rpm
7 9.4 266 3430 38 134 1 F,P
Usage
Installation type A submersible pump for efficient pumping of clean water, surface
P, S, T, Z water, and wastewater containing solids or long-fibered material. The
pump is designed for sustained high efficiency. For abrasive media,
Hard-Iron™ is required. Stainless steel N-impeller is available as an
option.
Installation type L A submersible pump for a mixed flow of clean water, surface water, or
storm water. Intended for high flow and low head applications, in
column installation. The pump is designed for sustained high
efficiency.
Denomination
Impeller material Non-explosion proof Explosion proof Pressure class Installation types
version version
Hard-Iron™ 3127.060 3127.070 LT — Low head L, P, S, T, Z, X
MT — Medium head
HT — High head
SH — Super head
Cast iron, gray 3127.161 3127.191 LT — Low head L, P, S, T, Z, X
MT — Medium head
HT — High head
SH — Super head
Stainless steel 3127.761 3127.771 LT — Low head L, P, S, T, Z, X
MT — Medium head
HT — High head
SH — Super head
P Semipermanent, wet well arrangement with the pump installed on two guide bars. The
connection to the discharge is automatic.
S Portable semipermanent, wet well arrangement with hose coupling or flange for
connection to the discharge pipeline.
T Vertical permanent, dry well arrangement with flange connection to the suction and
discharge piping.
Z Horizontal permanent, dry well arrangement with flange connection to the suction and
discharge piping.
X Optional installation, wet or dry well arrangement without predetermined mechanical
connection and with drilled flanges. Dry well arrangement requires cooling system or
de-rated motor.
Application limits
Feature Description
Liquid temperature Maximum 40°C (104°F)
Liquid temperature, warm water version Maximum 70°C (158°F)
Depth of immersion Maximum 20 m (65 ft)
pH of the pumped liquid 5.5 – 14
Liquid density Maximum 1100 kg/m3
Motor data
Feature Description
Motor type Squirrel-cage induction motor
Frequency 60 Hz
Power supply 1-phase or 3-phase
Starting method • Direct on-line
• Star-delta
• Soft starter
• Variable Frequency Drive (VFD)
Number of starts per hour Maximum 30
Code compliance IEC 60034-1
Voltage variation • Continuously running: Maximum ±5%
• Intermittent running: Maximum ±10%
Voltage imbalance between Maximum 2%
phases
Stator insulation class H (180°C, 356°F)
Motor encapsulation
Motor encapsulation is in accordance with IP68.
Cables
Application Type
Direct-on-line start Flygt SUBCAB® - a heavy duty 4 cores motor power cable
with two twisted pair screened control cores. Conductor
insulation rating of 90°C, which allows for increased
current. Superior mechanical strength and high abrasion
and tear resistant. Chemical resistant within pH 3-10 and
ozone, oil, and flame resistant. Used up to 70°C water
temperature. Cables < 10 mm2 with unscreened control
cores.
Application Type
Y/D start Flygt SUBCAB® - a heavy duty 7 cores motor power cable
with two twisted pair screened control cores. Conductor
insulation rating of 90°C, which allows for increased
current. Superior mechanical strength and high abrasion
and tear resistant. Chemical resistant within pH 3-10 and
ozone, oil, and flame resistant. Used up to 70°C water
temperature. Cables < 7G6 mm2 with unscreened
control cores.
Variable Frequency drive Screened Flygt SUBCAB® - a heavy duty 4 screened cores
motor power cable with four twisted pair screened
control cores. Conductor insulation rating of 90°C, which
allows for increased current. Superior mechanical
strength and high abrasion and tear resistant. Chemical
resistant within pH 3-10 and ozone, oil, and flame
resistant. Used up to 70°C water temperature.
Monitoring equipment
Thermal contacts opening temperature 125°C (257°F)
Materials
Surface treatment
Priming Finish
Painted with a primer, see internal standard Navy gray color NCS 5804-B07G. Two-component high-
M0700.00.0002 solid top coating, see internal standard M0700.00.0004
for standard painting and M0700.00.0008 for special
painting.
Options
• Warm liquid version (non-explosion proof versions)
• Leakage sensor in the stator housing (FLS)
• Leakage sensor in the oil housing (CLS)
• Surface treatment (Epoxy)
• Zinc anodes
• Other cables
Accessories
Discharge connections, adapters, hose connections, and other mechanical accessories
Electrical accessories such as pump controller, control panels, starters, monitoring relays,
cables
8
10
7 425
8 6
5
426
426
6
H [ft] / [m]
60 LT
18
16
50
14
40 12
10
30
8
20 6
4
10
425
2
426
0 0
0 20 40 60 80 100
0 200 400 600 800 10001200140016001800
Q [l/s] / [usgpm]
WS004979B
Rated power, Rated power, Curve/ Revolutions Rated Starting Power factor, Installation
kW hp Impeller No per minute, current, A current, A cos φ
rpm
5.6 7.5 426 1750 9.9 62 0.85 L
5.6 7.5 426 1750 9.9 62 0.85 P,S,X
5.6 7.5 426 1750 10 80 0.81 T,Z
7.5 10 425 1735 13 80 0.85 P,S,X
7.5 10 425 1735 13 80 0.85 T,Z
7.5 10 426 1735 13 80 0.85 L
7.5 10 426 1735 13 80 0.85 P,S,X
P2[hp] / [kW]
9
6.5
8 6.0
5.5
7
5.0
426
426
6 4.5
H [ft] / [m]
LT
16
50
14
40 12
10
30
8
20 6
4
10
2 426
426
0 0
0 10 20 30 40 50 60 70 80 90
0 200 400 600 800 1000 1200 1400
Q [l/s] / [usgpm]
WS004980B
Rated power, Rated power, Curve/ Revolutions Rated Starting Power factor, Installation
kW hp Impeller No per minute, current, A current, A cos φ
rpm
5.6 7.5 426 1745 30 66 0.96 P,S,X
MT
P2[hp] / [kW]
10
7
438
8 6
439
5
6
4
H [ft] / [m]
70
MT
20
60
16
50
40 12
30
8
20
4 439
438
10
0 0
0 10 20 30 40 50 60 70 80
0 200 400 600 800 1000 1200 1400
Q [l/s] / [usgpm]
WS005058B
Rated power, Rated power, Curve/ Revolutions Rated Starting Power factor, Installation
kW hp Impeller No per minute, current, A current, A cos φ
rpm
5.6 7.5 439 1750 9.9 62 0.85 P,S,X
5.6 7.5 439 1750 10 80 0.81 T,Z
7.5 10 438 1735 13 80 0.85 T,Z
7.5 10 438 1735 13 80 0.85 P,S,X
7.5 10 439 1735 13 80 0.85 P,S,X
Rated power, Rated power, Curve/ Revolutions Rated Starting Power factor, Installation
kW hp Impeller No per minute, current, A current, A cos φ
rpm
5.6 7.5 439 1745 30 66 0.96 P,S,X
HT
P2[hp] / [kW]
16
10
12
8 487 488
8 6 489
4
4
H [ft] / [m]
HT
100 30
80 25
487
20
60
15
40
488
10
20
5 489
0 0
0 10 20 30 40 50 60
0 200 400 600 800 1000
Q [l/s] / [usgpm]
WS005059B
Rated power, Rated power, Curve/ Revolutions Rated Starting Power factor, Installation
kW hp Impeller No per minute, current, A current, A cos φ
rpm
5.6 7.5 489 1750 9.9 62 0.85 P,S,X
5.6 7.5 489 1750 10 80 0.81 T,Z
7.5 10 487 1735 13 80 0.85 T,Z
7.5 10 487 1735 13 80 0.85 P,S,X
7.5 10 488 1735 13 80 0.85 T,Z
7.5 10 488 1735 13 80 0.85 P,S,X
7.5 10 489 1735 13 80 0.85 P,S,X
Rated power, Rated power, Curve/ Revolutions Rated Starting Power factor, Installation
kW hp Impeller No per minute, current, A current, A cos φ
rpm
5.6 7.5 489 1745 30 66 0.96 P,S,X
SH
P2[hp] / [kW]
12 9
8
10 248
7
8 6
249
5
6
H [ft] / [m]
160
SH
45
140
40
120
35
100 30
80 25
20
60
15
40 248
10 249
20 5
0 0
0 5 10 15 20 25 30
0 100 200 300 400 500
Q [l/s] / [usgpm]
WS005060B
Rated power, Rated power, Curve/ Revolutions Rated Starting Power factor, Installation
kW hp Impeller No per minute, current, A current, A cos φ
rpm
4.8 6.4 445 1760 8.6 62 0.82 T,Z
4.8 6.4 446 1760 8.6 62 0.82 T,Z
5.6 7.5 445 1750 9.9 62 0.85 P,S,X
5.6 7.5 445 1750 10 80 0.81 T,Z
5.6 7.5 446 1750 9.9 62 0.85 P,S,X
5.6 7.5 446 1750 10 80 0.81 T,Z
7.5 10 445 1735 13 80 0.85 P,S,X
7.5 10 446 1735 13 80 0.85 P,S,X
8.2 11 247 3510 13 120 0.88 T,Z
8.2 11 247 3510 13 120 0.88 P,S,X
8.2 11 248 3510 13 120 0.88 T,Z
8.2 11 248 3510 13 120 0.88 P,S,X
8.2 11 249 3510 13 120 0.88 P,S,X
8.2 11 249 3510 13 120 0.88 T,Z
Usage
Installation type A submersible pump for efficient pumping of clean water, surface
P, S, T, Z water, and wastewater containing solids or long-fibered material. The
pump is designed for sustained high efficiency. For abrasive media,
Hard-Iron™ is required. Stainless steel N-impeller is available as an
option.
Installation type L A submersible pump for a mixed flow of clean water, surface water, or
storm water. Intended for high flow and low head applications, in
column installation. The pump is designed for sustained high
efficiency.
Denomination
Impeller material Non-explosion proof Explosion proof Pressure class Installation types
version version
Hard-Iron™ 3127.920 3127.930 LT — Low head L, P, S, T, Z, X
MT — Medium head
HT — High head
SH — Super head
Cast iron, gray 3127.901 3127.911 LT — Low head L, P, S, T, Z, X
MT — Medium head
HT — High head
SH — Super head
Stainless steel 3127.961 3127.971 LT — Low head L, P, S, T, Z, X
MT — Medium head
HT — High head
SH — Super head
L Vertical semipermanent, wet well column pipe arrangement where the well is divided
into a suction part and a discharge part. Pump end equipped with guide vanes.
P Semipermanent, wet well arrangement with the pump installed on two guide bars. The
connection to the discharge is automatic.
S Portable semipermanent, wet well arrangement with hose coupling or flange for
connection to the discharge pipeline.
T Vertical permanent, dry well arrangement with flange connection to the suction and
discharge piping.
Z Horizontal permanent, dry well arrangement with flange connection to the suction and
discharge piping.
X Optional installation, wet or dry well arrangement without predetermined mechanical
connection and with drilled flanges. Dry well arrangement requires cooling system or
de-rated motor.
Application limits
Feature Description
Liquid temperature Maximum 40°C (104°F)
Depth of immersion Maximum 20 m (65 ft)
pH of the pumped liquid 5.5 – 14
Liquid density Maximum 1100 kg/m3
Motor data
Feature Description
Motor type Line started permanent magnet motor (LSPM)
Frequency 60 Hz
Power supply 3-phase
Starting method • Direct on-line
• Star-delta
• Soft starter
• Variable Frequency Drive (VFD)
Number of starts per hour Maximum 30
Code compliance IEC 60034-1
Voltage variation • Continuously running: Maximum ±5%
• Intermittent running: Maximum ±10%
Voltage imbalance between Maximum 2%
phases
Stator insulation class H (180°C, 356°F)
Motor encapsulation
Motor encapsulation is in accordance with IP68.
Cables
Application Type
Direct-on-line start Flygt SUBCAB® - a heavy duty 4 cores motor power cable
with two twisted pair screened control cores. Conductor
insulation rating of 90°C, which allows for increased
current. Superior mechanical strength and high abrasion
and tear resistant. Chemical resistant within pH 3-10 and
ozone, oil, and flame resistant. Used up to 70°C water
temperature. Cables < 10 mm2 with unscreened control
cores.
Application Type
Y/D start Flygt SUBCAB® - a heavy duty 7 cores motor power cable
with two twisted pair screened control cores. Conductor
insulation rating of 90°C, which allows for increased
current. Superior mechanical strength and high abrasion
and tear resistant. Chemical resistant within pH 3-10 and
ozone, oil, and flame resistant. Used up to 70°C water
temperature. Cables < 7G6 mm2 with unscreened
control cores.
Variable Frequency drive Screened Flygt SUBCAB® - a heavy duty 4 screened cores
motor power cable with four twisted pair screened
control cores. Conductor insulation rating of 90°C, which
allows for increased current. Superior mechanical
strength and high abrasion and tear resistant. Chemical
resistant within pH 3-10 and ozone, oil, and flame
resistant. Used up to 70°C water temperature.
Monitoring equipment
• Thermal contacts opening temperature 125°C (257°F)
Materials
Surface treatment
All cast parts are primed with a water-borne primer. The finishing coat is a high-solid two
pack paint.
Priming Finish
Painted with a primer, see internal standard Navy gray color NCS 5804-B07G. Two-component high-
M0700.00.0002 solid top coating, see internal standard M0700.00.0004
for standard painting and M0700.00.0008 for special
painting.
Options
• Leakage sensor in the stator housing (FLS)
• Leakage sensor in the oil housing (CLS)
• Surface treatment (Epoxy)
• Zinc anodes
• Other cables
Accessories
Discharge connections, adapters, hose connections, and other mechanical accessories
Electrical accessories such as pump controller, control panels, starters, monitoring relays,
cables
H [ft] / [m]
LT
16
50
14
40 12
10
30
8
20 6
4
10 425
2 426
0 0
0 20 40 60 80 100
0 200 400 600 800 10001200140016001800
Q [l/s] / [usgpm]
WS004981A
Rated power, Rated power, Curve/ Revolutions Rated Starting Power factor, Installation
kW hp Impeller No per minute, current, A current, A cos φ
rpm
6.3 8.5 426 1800 9.3 80 0.92 L
6.3 8.5 426 1800 9.3 80 0.92 P,S,X
6.5 8.7 426 1800 9.5 80 0.93 T,Z
8.2 11 425 1800 12 80 0.93 P,S,X
8.2 11 425 1800 12 80 0.93 T,Z
8.2 11 426 1800 12 80 0.93 L
8.2 11 426 1800 12 80 0.93 P,S,X
MT
P2[hp] / [kW]
12
8 438
10
7
8 6 439
5
6
4
H [ft] / [m]
MT
70
20
60
16
50
40 12
30
8
20
438
439
4
10
0 0
0 10 20 30 40 50 60 70 80
0 200 400 600 800 1000 1200 1400
Q [l/s] / [usgpm]
WS004757A
Rated power, Rated power, Curve/ Revolutions Rated Starting Power factor, Installation
kW hp Impeller No per minute, current, A current, A cos φ
rpm
5.5 7.4 439 1500 9.6 76 0.9 T,Z
6.3 8.5 439 1800 9.3 80 0.92 P,S,X
6.5 8.7 439 1800 9.5 80 0.93 T,Z
6.5 8.7 439 1500 11 76 0.91 P,S,X
8.2 11 438 1800 12 80 0.93 T,Z
8.2 11 438 1800 12 80 0.93 P,S,X
8.2 11 439 1800 12 80 0.93 P,S,X
HT
P2[hp] / [kW]
16
10
12 487 488
8
8 6 489
4
4
H [ft] / [m]
HT
100 30
80 25
487
20
60
15
40
10
488
20
5
489
0 0
0 10 20 30 40 50 60
0 200 400 600 800 1000
Q [l/s] / [usgpm]
WS004758A
Rated power, Rated power, Curve/ Revolutions Rated Starting Power factor, Installation
kW hp Impeller No per minute, current, A current, A cos φ
rpm
5 6.7 488 1500 8.9 76 0.89 P,S,X
5 6.7 489 1500 8.9 76 0.89 P,S,X
5.5 7.4 488 1500 9.6 76 0.9 T,Z
5.5 7.4 489 1500 9.6 76 0.9 T,Z
6.3 8.5 489 1800 9.3 80 0.92 P,S,X
6.5 8.7 486 1500 11 76 0.91 P,S,X
6.5 8.7 486 1500 11 76 0.91 T,Z
6.5 8.7 487 1500 11 76 0.91 P,S,X
6.5 8.7 487 1500 11 76 0.91 T,Z
6.5 8.7 488 1500 11 76 0.91 P,S,X
6.5 8.7 489 1800 9.5 80 0.93 T,Z
6.5 8.7 489 1500 11 76 0.91 P,S,X
8.2 11 487 1800 12 80 0.93 T,Z
8.2 11 487 1800 12 80 0.93 P,S,X
8.2 11 488 1800 12 80 0.93 T,Z
8.2 11 488 1800 12 80 0.93 P,S,X
8.2 11 489 1800 12 80 0.93 P,S,X
SH
P2[hp] / [kW]
14
10
12 9 247
8 248
10
7
8 6 249
H [ft] / [m]
180 SH
160 50
247
140
40
120
100 30
80
20
60
40 248
10 249
20
0 0
0 5 10 15 20 25 30
0 100 200 300 400 500
Q [l/s] / [usgpm]
WS004751A
Xylem Water Solutions Global Visit our Web site for the latest version of this document
and more information
Services AB
361 80 Emmaboda The original instruction is in English. All non-English
instructions are translations of the original instruction.
Sweden
Tel: +46-471-24 70 00 © 2020 Xylem Inc
Fax: +46-471-24 74 01
http://tpi.xyleminc.com
www.xylemwatersolutions.com/
contacts/
90016701_1.0_en-US_2020-01_TS_Flygt 3127