Professional Documents
Culture Documents
Ledylcd PDF
Ledylcd PDF
LICENSES
Supported licenses may differ by model. For more information about licenses, visit www.lg.com.
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D
symbol are trademarks of Dolby Laboratories.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing LLC.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a
subsidiary of Rovi Corporation. This is an official DivX Certified® device that plays
DivX video. Visit divx.com for more information and software tools to convert your
files into DivX video.
“DivX Certified® to play DivX® and DivX Plus® HD (H.264/MKV) video up to 1080p
HD including premium content.”
“DivX®, DivX Certified®, DivX Plus® HD and associated logos are trademarks of
Rovi Corporation or its subsidiaries and are used under license.”
NOTE
yy : Plasma TV
Plasma LCD
: LED LCD TV, LCD TV
Image shown may differ from your TV.
yy
Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.
yy
The available menus and options may differ from the input source or product model that you are
yy
using.
IMPORTANT SAFETY INSTRUCTIONS 3
ENGLISH
of sufficient magnitude to constitute a risk of in accordance with the manufacturer’s
ENG
electric shock to persons. instructions.
ENGLISH
may occur. Do not clean with chemicals
ENG
DISCONNECTING DEVICE FROM THE MAIN
yy such as alcohol, thinners or benzine.
POWER Moving
yy
The power outlet must remain readily Make sure the product is turned off,
accessed in the event the device needs to unplugged and all cables have been
be unplugged. removed. It may take 2 or more people to
As long as this unit is connected to the AC
yy carry larger TVs. Do not press or put stress
wall outlet, it is not disconnected from the on the front panel of the TV.
AC power source even if the unit is turned Ventilation
yy
off. Install your TV where there is proper
Do not attempt to modify this product in any
yy ventilation. Do not install in a confined
way without written authorization from LG space such as a bookcase. Do not cover the
Electronics. Unauthorized modification could product with cloth or other materials while
void the user’s authority to operate this plugged. Do not install in excessively dusty
product. places.
ANTENNAS Outdoor antenna grounding
yy If you smell smoke or other odours coming
yy
(Can differ by country): from the TV, unplug the power cord contact
If an outdoor antenna is installed, follow an authorized service center.
the precautions below. An outdoor antenna Do not press strongly upon the panel with
yy
system should not be located in the vicinity hand or sharp object such as nail, pencil or
of overhead power lines or other electric light pen, or make a scratch on it.
or power circuits, or where it can come in
Keep the product away from direct sunlight.
yy
contact with such power lines or circuits as
death or serious injury can occur. Be sure the
antenna system is grounded so as to provide
some protection against voltage surges
and built-up static charges. Section 810 of
6 IMPORTANT SAFETY INSTRUCTIONS
Dot Defect
yy viewers may experience a seizure or epilepsy
The Plasma or LCD panel is a high when exposed to certain factors, including
technology product with resolution of two flashing lights or images in TV or video
million to six million pixels. In a very few games. If you or anybody from your family
cases, you could see fine dots on the screen has a history of epilepsy or seizure, please
while you’re viewing the TV. Those dots consult with your doctor before watching 3D
are deactivated pixels and do not affect the TV.
performance and reliability of the TV. Also certain symptoms can occur in
Generated Sound
yy unspecified conditions without any previous
“Cracking” noise: A cracking noise that history. If you experience any of the following
occurs when watching or turning off the TV symptoms, immediately stop watching the
is generated by plastic thermal contraction 3D imaging and consult a doctor: dizziness or
due to temperature and humidity. This noise light-headedness, visual transition or altered
is common for products where thermal vision, visual or facial instability, such as eye
deformation is required. or muscle twitching, unconscious action,
Electrical circuit humming/panel buzzing: A convulsion, loss of conscience, confusion
low level noise is generated from a high- or disorientation, loss of directional sense,
speed switching circuit, which supplies a cramps, or nausea. Parents should monitor
large amount of current to operate a product. their children, including teenagers, for these
It varies depending on the product. symptoms as they may be more sensitive to
This generated sound does not affect the the effects of watching 3D TV.
performance and reliability of the product. Risk of photosensitization seizure can be
reduced with the following actions.
Take care not to touch the ventilation
yy
ENGLISH
yyLCD
If the TV feels cold to the touch, there may
be a small “flicker” when it is turned on. This
is normal, there is nothing wrong with TV.
Some minute dot defects may be visible on
the screen, appearing as tiny red, green, or
blue spots. However, they have no adverse
effect on the TV’s performance. Avoid
touching the LCD screen or holding your
finger(s) against it for long periods of time.
Doing so may produce some temporary
distortion effects on the screen.
ENGLISH
ENG
8 TABLE OF CONTENTS
TABLE OF CONTENTS
38 - Checking current program info
39 Using additional options
2 LICENSES
39 - Adjusting aspect ratio
40 - Changing AV modes
3 IMPORTANT SAFETY IN- 40 - Using the input list
STRUCTIONS 41 Using the quick menu
42 ENTERTAINMENT
8 TABLE OF CONTENTS
42 Network Connection
42 - Connecting to a wired network
10 ASSEMBLING AND PREPARING 43 - Connecting to a wireless network
23 - Mounting on a table
ENG
119 MAINTENANCE
87 3D IMAGING (FOR 3D TV)
ENGLISH
119 Updating the TV Firmware
ENG
87 3D Technology 120 Cleaning Your TV
87 - When watching 3D imaging 120 - Screen and frame
87 - When using 3D Glasses 120 - Cabinet and stand
87 - 3D Imaging Viewing Range ( Plasma
) 120 - Power cord
88 Viewing 3D Imaging 120 Preventing “Image burn” or “Burn-in” on
88 - Setting 3D Imaging your TV screen
TV
SAVING
1 2 3
4 5 6
7 8 9
0 FLASHBK
LIST
MARK
FAV
P
VOL CH
A
3D G
E
MUTE
ENTER
BACK EXIT
L/R SELECT
FREEZE
RATIO
1 Gently wipe the spots on the cabinet with the polishing cloth.
2 Wipe spots on the exterior only with the cleansing cloths.
Do not wipe roughly when removing stains. Excessive pressure
may cause scratches or discoloration.
For cleaning front frame, please slowly wipe in one direction
after spraying water 1-2 times on cleansing cloths. Please
remove excessive moisture after cleaning. Excessive moisture
may cause water stains on the frame. Water
3 Sold seperately for LV3700, LV5500, LW5700, LW6500 series.
ASSEMBLING AND PREPARING 11
PZ950E series
x4 x3 x4 x4
M4 x 26 M5 x 14.5 M4 x 28 M5 x 14.5
ENGLISH
(AN-WF100)
ENG
LV3700, LV5500, LW5700, LW6500, LW9800 series
x8 x8
M4 x 12 M4 x 16
Screw for assembly Screw for assembly Cable holder Screw for fixing
(LV3700, LV5500, (LW9800 series) (Depending on model) (32LV3700, 32LV5500,
LW5700, LW6500 series) 32LW5700)
CAUTION
Do not use any unapproved items to ensure the safety and product life span.
yy
Any damages or injuries by using unapproved items are not covered by the warranty.
yy
In case of some model, the thin film on screen is a part of TV, So don’t take it off.
yy
NOTE
The items supplied with your product may vary depending on the model.
yy
Product specifications or contents of this manual may be changed without prior notice due to
yy
upgrade of product functions.
New features may be added to this TV in the future.
yy
( LCD ) For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm
yy
thick and 18 mm width.
B B
A A
*A 10 mm
*B 18 mm
ENGLISH
ENG
ASSEMBLING AND PREPARING 13
Optional Extras
Optional extras can be changed or modified for quality improvement without any notification.
Contact your dealer for buying these items.
These device only works with compatible LG LED LCD TV or Plasma TV.
ENGLISH
ENG
Magic Motion Remote FPR 3D Glasses4 Video Call Camera5
(AN-MR200) (AG-F2**) (AN-VC300)
(Depending on model)
Power indicator
Speakers
Machine
Ready
Time
4
3
OPTICAL
AUDIO IN DIGITAL
(RGB/DVI) AUDIO OUT
RS-232C IN
2
/DVI IN
2 AV IN2
COMPON ENT IN
L/MONO AUDIO R
Y PB PR L R
1
ANTENNA IN CABLE IN
Rear Connection
VIDEO AUDIO
panel (See p.106)
VIDEO
1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.
2 All of the buttons are touch sensitive and can be operated through simple touch with your finger.
ASSEMBLING AND PREPARING 15
Power indicator
Speakers
H
CH VOL ENTER HOME INPUT
or Touch buttons2
H
CH VOL ENTER HOME INPUT
Time Machine Ready USB Apps
USB IN 2
ENGLISH
ENG
USB IN 1
/DVI
COMPONENT
IN1
WIRELESS
IN 4
CONTROL
ꔡ
Y
/DVI
VIDEO
IN 3
PB
AV IN1
VIDEO
PR
/DVI
RS-232C IN (CONTROL&SERVICE)
IN 2
L/MONO AUDIO R
L
AUDIO
/DVI
IN 1 (ARC)
R
AV IN 2
(See p.106)
1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.
2 All of the buttons are touch sensitive and can be operated through simple touch with your finger.
NOTE
You can set the power indicator light to on or off by selecting OPTION in the Home menu - SETUP.
yy
16 ASSEMBLING AND PREPARING
LW5700 series
Screen
CH
Buttons
VOL
ENTER
HOME H
INPUT
/DVI
COMPONENT
IN1
WIRELESS
IN 4
ENG
CONTROL
ꔡ
Y
/DVI
VIDEO
IN 3
PB
AV IN1
VIDEO
PR
/DVI
RS-232C IN (CONTROL&SERVICE)
IN 2
L/MONO AUDIO R
L
AUDIO
/DVI
IN 1 (ARC)
R
Button Description
/I Turns the power on or off.
INPUT Changes the input source.
HOME Accesses the Home menu, or saves your input and exits the menus.
ENTER ꔉ Selects the highlighted menu option or confirms an input
- VOL + Adjusts the volume level.
v CH ^ Scrolls through the saved channels.
1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.
NOTE
You can set the power indicator light to on or off by selecting OPTION in the Home menu - SETUP.
yy
ASSEMBLING AND PREPARING 17
LW9800 series
Screen
Power indicator
Speakers
ENGLISH
/DVI
COMPONENT
IN1
WIRELESS
IN 4
ENG
CONTROL
ꔡ
Y
/DVI
VIDEO
IN 3
PB
AV IN1
VIDEO
PR
/DVI
RS-232C IN (CONTROL&SERVICE)
IN 2
L/MONO AUDIO R
L
AUDIO
/DVI
IN 1 (ARC)
R
(See p.106)
1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.
2 All of the buttons are touch sensitive and can be operated through simple touch with your finger.
NOTE
You can set the power indicator light to on or off by selecting OPTION in the Home menu - SETUP.
yy
18 ASSEMBLING AND PREPARING
LV3700 series
Screen
Power indicator
Speakers
H/P
USB Apps
USB IN
ENGLISH
ENG
/DVI
IN 3
IN
OPTICAL DIGITAL RGB IN (PC)
IN 2
Y
PB
/DVI
VIDEO
IN 1 (ARC)
VIDEO
L/MONO AUDIO R
AV IN
ANTENNA CABLE
IN IN
(See p.106)
R
2 1
1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.
2 All of the buttons are touch sensitive and can be operated through simple touch with your finger.
NOTE
You can set the power indicator light to on or off by selecting OPTION in the Home menu - SETUP.
yy
ASSEMBLING AND PREPARING 19
ENGLISH
Model Screw for Number of
ENG
Hold the top and bottom of the TV frame
yy assembly screws
firmly. Make sure not to hold the transparent 50PZ950E M5 x 14.5 3
part, speaker, or speaker grill area. 60PZ950E M5 x 14.5 4
Stand Body
Stand Base
Stand Body
3 Secure the TV and the stand with the 4 To detach the stand,
screws.
1 Lay the TV with the screen side down on a flat
Model Screw for Number of surface.
assembly screws
50PZ950E M4 x 26 4 2 Remove the 4 screws and pull the stand away
60PZ950E M4 x 28 4 from the TV.
Protection cover
ASSEMBLING AND PREPARING 21
LV3700, LV5500, LW5700, LW6500 series 4 Secure the TV and the stand with the 4
screws.
1 Lay the TV with the screen side down on a flat
Screw for assembly Number of screws
surface.
M4 x 12 4
CAUTION
Lay a foam mat or soft protective cloth
yy
on the surface to protect the screen from
damage. Make sure no objects press
against the screen.
ENGLISH
2 Remove the 4 screws and pull the stand away
ENG
from the TV.
Stand Base
Stand Body
To detach the stand,
1 Lay the TV with the screen side down on a flat
surface.
ENGLISH
ENG
Stand Base
10 cm
10 cm 10 cm
10 cm
ENGLISH
Do not place the TV near or on sources
yy or rocking the TV may cause injury.
ENG
of heat, as this may result in fire or other
damage.
NOTE
Swivel 20 degrees to the left or right and
yy
adjust the angle of the TV to suit your
view.
20 20
24 ASSEMBLING AND PREPARING
Securing the TV to a wall (optional) Using the Kensington security system (optional)
The Kensington security system connector is
located at the rear of the TV. For more information
of installation and using, refer to the manual
provided with the Kensington security system or
visit http://www.kensington.com .
eye-bolts on the rear of the TV. The Kensington security system is optional.
yy
You can obtain additional accessories from
3 Connect the eye-bolts and wall brackets tightly your local dealer.
with a sturdy rope.
Make sure to keep the rope horizontal with the
flat surface.
CAUTION
Make sure that children do not climb on or
yy
hang on the TV.
NOTE
Use a platform or cabinet that is strong and
yy
large enough to support the TV securely.
yy Brackets, bolts and ropes are optional. You
can obtain additional accessories from your
local dealer.
ASSEMBLING AND PREPARING 25
Mounting on a wall
CAUTION
Attach an optional wall mount bracket at the rear Disconnect the power first, and then move
yy
of the TV carefully and install the wall mount or install the TV. Otherwise electric shock
bracket on a solid wall perpendicular to the may occur.
floor. When you attach the TV to other building If you install the TV on a ceiling or slanted
yy
materials, please contact qualified personnel. wall, it may fall and result in severe injury.
LG recommends that wall mounting be performed Use an authorized LG wall mount bracket
by a qualified professional installer. and contact the local dealer or qualified
personnel.
Do not over tighten the screws as this may
yy
cause damage to the TV and void your
warranty.
10 cm yy Use the screws and wall mount bracket
that meet the VESA standard. Any damages
10 cm or injuries by misuse or using an improper
10 cm accessory are not covered by the warranty.
10 cm
NOTE
Use the screws that are listed on the VESA
yy
standard screw specifications.
yy The wall mount kit includes an installation
Make sure to use screws and wall mount
ENGLISH
manual and necessary parts.
ENG
bracket that meet the VESA standard. Standard yy The wall mount bracket is optional. You can
dimensions for the wall mount kits are described obtain additional accessories from your local
in the following table. dealer.
yy The length of screws may differ depending
Model 50PZ950E 60PZ950E on the wall mount. Make sure to use the
VESA 400 x 400 600 x 400 proper length.
Standard screw M6 M8 yy For more information, refer to the manual
Number of screws 4 4 supplied with the wall mount bracket.
Wall mount bracket PSW400B, PSW600B,
(optional) PSW400BG, PSW600BG
PZ950E series 1 Gather and bind the cables with the cable
holder on the TV back cover.
1 Install the power cord holder and power cord.
- It will help prevent the power cable from
being removed by accident.
or
CAUTION
Do not move the TV by holding the cable
yy
holder and power cord holder, as the cable
holders may break, and injuries and damage
to the TV may occur.
ASSEMBLING AND PREPARING 27
REMOTE CONTROL
The descriptions in this manual are based on the buttons on the remote control.
Please read this manual carefully and use the TV correctly.
To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching
the and ends to the label inside the compartment, and close the battery cover.
To remove the batteries, perform the installation actions in reverse.
CAUTION
Do not mix old and new batteries, as this may damage the remote control.
yy
Make sure to point the remote control toward the remote control sensor on the TV.
LIGHT
(POWER)
Turns the TV on or off.
ENGLISH
RAD
SAVING
ENG
ENERGY SAVING (See p.92)
1 2 ABC 3 DEF Adjusts the brightness of the screen to reduce energy consumption.
Q.VIEW
Alternates between the two last channels selected (pressing repeatedly).
BACK GUIDE EXIT
REC
SUBTITLE
28 REMOTE CONTROL
LIGHT
VOL CH
A
RATIO G
E RATIO (See p.39)
DELETE
MUTE LIGHT
Resizes an image.
SMART TV
3D (for 3D TV) (See p.88)
Premium
ENERGY Home
AV MODE INPUTQ.MENU Uses for viewing 3D video.
TV/
RAD
SAVING
MUTE
ENTER Mutes all sounds.
1 2 ABC 3 DEF DELETE
Deletes letters and numbers.
4 GHI 5 JKL 6 MNO
BACK GUIDE EXIT CH
7PQRS 8 TUV 9 WXYZ Scrolls through the saved channels.
LIGHT
PAGE
LIST 0 Q.VIEW
Moves to the previous or next screen.
LIVE TV INFO
ENERGY AV MODE
MARKINPUTFREEZE
FAV TV/
CHAR/NUM RAD P
VOL CH
A
SAVING 3D REC G
E
1SUBTITLE MUTE
2 ABC 3 DEF
DELETE
ENGLISH
ENG
SMART TV
4 5 JKL Q.MENU
6 MNO
3D OPTION
GHI
Premium Home
MARK
FAV
CHAR/NUM P
3D EXIT
BACK GUIDE
VOL CH
A
G
E
DELETE
MUTE
SMART TV 3D OPTION
Premium
LIVE TV INFO RATIO
Accesses the Premium menus.
Premium Home Q.MENU
FREEZE
SUBTITLE
BACK
Returns to the previous level.
GUIDE
Displays the program event according to time scheduler.
EXIT
Clears all on-screen displays and returns to TV viewing.
MUTE RAD
SAVINGSMART TV
1
Premium 2
Home
ABC 3
Q.MENU
DEF
REMOTE CONTROL 29
4 GHI 5 JKL 6 MNO
ENTER
7PQRS 8 TUV 9 WXYZ
LIST 0 Q.VIEW
SAVING
SMART TV 3D OPTION
LIVE TV
Returns to the LIVE TV.
Home
1SUBTITLE 2 3
Premium REC
Q.MENU
ABC DEF
INFO
4 GHI ENTER
5 JKL 6 MNO Views the information of the current program and screen.
SAVING
REC Freezes the current frame (Not supported when using USB Mode and
Home
1Premium 2SUBTITLE
ABC 3 DEF
Q.MENU
Simplink.)
4 GHI ENTER
5 JKL 6 MNO REC
Adjusts Time machine mode.
7PQRS 8 TUV 9 WXYZ RATIO (See p.39)
LIST
BACK
0
GUIDE
Q.VIEW
EXIT
Resizes an image.
MARK SUBTITLE
FAV
Recalls your preferred subtitle in digital mode.
ENGLISH
CHAR/NUM P
VOL RATIO CH
A
Selects "Caption- on or off" in analog mode.
ENG
G
E
LIVE TV INFO
DELETE
MUTE FREEZE
SMART TV
REC
Premium Home Q.MENU
RATIO SUBTITLE
ENTER
SUBTITLE INFO
30 REMOTE CONTROL
CAUTION
Do not mix old and new batteries, as this may damage the remote control.
yy
Make sure to point the remote control at the remote control sensor on the TV.
(POWER)
Turns the TV on or off.
Home
Accesses the Home menu.
For 3D TV
REMOTE CONTROL 31
ENGLISH
Motion Remote Control.
How to use Magic Motion Remote
ENG
Manufacturer and installer cannot provide
yy
Control service related to human safety as the
applicable wireless device has possibility of
1 Press ENTER button if there is no pointer on electric wave interference.
your TV screen. The pointer will then appear on It is recommended that an Access Point
yy
the screen. (AP) be located more than 1 m away from
If the pointer has not been used for a certain the TV. If the AP is installed closer than 1
period of time, it will disappear. m, the magic motion remote control may
not perform as expected due to frequency
2 You can move the pointer by aiming the interference.
Pointer Receiver of the remote control at your
TV then move it left, right, up or down.
If the pointer does not work properly after
clicking the ENTER button, leave the remote
control for 10 seconds then use it again.
32 WATCHING TV
WATCHING TV
Connecting to an antenna or
cable
Connect an antenna or cable to watch TV while
referring to the following. The illustrations may
differ from the actual items and a RF cable is
optional.
NOTE
To improve the picture quality in a poor signal
yy
area, please purchase a signal amplifier and
ANTENNA install properly.
CABLE
IN Use a signal splitter to use moreINthan 2 TVs.
yy
If the antenna is not installed properly,
yy
contact your dealer for assistance.
CAUTION
Make sure not to bend the copper wire of
yy
the RF cable.
Copper wire
NOTE
4 When the basic settings are complete,
You can also access Factory Reset by
yy press ENTER.
accessing OPTION in the Home menu -
SETUP. NOTE
If you do not complete the Factory Reset,
yy
3 Follow the on-screen instructions to customize it will appear whenever the TV turns on.
your TV settings according to your preferences. Disconnect the power cord from the
yy
power outlet when you do not use the
Selects a language to
Language TV for a long period of time.
display.
ENGLISH
ENG
Mode Setting
Selects Home Use for 5 To turn the TV off, press the power button on
the home environment. the remote control.
Sets the standby light.
Power Indicator
(For LED LCD TV)
Sets your network to
Network Setting
enable network-related
feature on the TV.
(For LW9800 series)
Watching TV
1 In Standby mode, press the power button on
the remote control to turn the TV on.
Plasma
1 2 3 4 5 6
Premium LG Apps
Hot New
UCC Service
7
Movie Online
Weather Info
Photo Album
World Nature 5:05 ~ 5:55
ENGLISH
ENG
9
Search LG Apps Web Browser Media Link Arrow Sudoku My Apps
Option Description
1 Current Date, Time
2 Channel program info
Function card: You can enjoy various content files by selecting
3 each card.
4 Function card position
5 Sign In
6 Exit
7 Current watching channel screen
8 INPUT, SETUP, GUIDE menu.
9 Launcher bar
36 WATCHING TV
list.
ENG
Adds or deletes a
To store channels manually, channel.
Add/Delete
The deleted channel
1 Press Home to access the Home menu. displays in blue.
6 When you are finished, press EXIT. 6 When you are finished, press EXIT.
When you return to the previous menu, press When you return to the previous menu, press
BACK. BACK.
NOTE
If the TV scans a blocked channel, you will
yy
be prompted to enter your password to keep
the channel scanned.
You can store up to 1200 channels. The
yy
number of channels that you can store
differs depending on the broadcasting signal
environment.
The channels are stored in the order of DTV,
yy
TV, and Cable TV.
WATCHING TV 37
ENGLISH
ENG
38 WATCHING TV
▲
ꔯ Caption ꔷ 1080i
▼
10:10 11:40
Icon Description
Dolby Digital The program contains a Dolby Digital audio signal in TV and HDMI input sources.
Dolby Digital The program contains a Dolby Digital Plus audio signal in TV and HDMI input
Plus sources.
The program contains one or more language caption services. You can select a
Caption ꔯ closed caption you want by using the quick menu.
Using additional options - Full Wide: When TV receives the wide screen
signal,it will lead you to adjust the picture
horizontally or vertically, in a linear proportion,to
Adjusting aspect ratio
fill the entire screen fully.
Resize an image to view at its optimal size by 4:3 and 14:9 video is supported in full screen
pressing RATIO while you are watching TV. with-out any video distortion through DTV
input.
NOTE
You can also change the image size by
yy
pressing Q. MENU or accessing Aspect
Ratio in the PICTURE menu.
The available ratio varies depending on the
yy
input source.
- 4:3: Resizes imagesto the previous standard
- The input sources: HDMI-PC and RGB-PC 4:3.
support 4:3 and 16:9.
ENGLISH
- Just Scan: Displays video images in the original in 4:3, but is moved to the up and down.
ENG
size without cutting off the edges.
not display.
ENG
NOTE
You can also access the input source list
yy
by selecting INPUT in the Home menu.
1 Press INPUT to access the input sources. Subtitle Recalls your preferred subtitle in
Language digital mode.
2 Press the Green button. Caption Activates or deactivate the subtitles
(Analog signal).
3 Press the Navigation buttons to scroll to one of
Audio Changes the audio language (Digital
the input sources.
Language signal)
4 Press the Navigation buttons to scroll to one of Audio Changes the MTS sound (Analog
ENGLISH
the input labels. signal)
ENG
Energy Reduces the power consumption by
5 When you are finished, press EXIT. Saving adjusting the screen brightness.
When you return to the previous menu, press AV Mode Sets the optimized image and
BACK. sound settings.
Del/Add Edits the channels to add or delete
the channel.
USB Device Eject a USB device.
The menu is displayed only when
the USB device is connected.
NOTE
The available menus and options may
yy
differ from the input source or product
model that you are using.
USB IN 2
number of home networks may require the TV connected, press the Navigation buttons to
USB IN 1
network settings to be adjusted. For most home select Wired and press ENTER.
networks, the TV will connect to automatically
/DVI
COMPONENT
IN 4
without any adjustments. WIRELESS
Y
CONTROL
ꔡ
select Resetting. The new connection settings
/DVI
For detail information, contact your internet
VIDEO
IN 3
PB
AV IN1
/DVI
RS-232C IN (CONTROL&SERVICE)
IN 2
L/MONO AUDIO R
/DVI
IN 1 (ARC)
R
i.e) AV IN 2
- If selecting IP Manual Setting, press the
Navigation and Number buttons. IP addresses
AUDIO / VIDEO
LAN RGB IN (PC) AUDIO IN OPTICAL
PTICAL
TICAL DIGIT
DIGITAL ANTENNA
ANTENNA/ COMPONENT IN 2 H/P
(RGB/DVI) AUDIO OUT CABLE IN AUDIO / Y PB PR
@
Configuration Protocol) server function. The
IP address will automatically be determined.
ETHERNET
Cable modem - IP Manual Setting: Select if there is no DHCP
Internet
server on the network or you want to set the
CAUTION IP address manually.
Do not connect a modular phone cable to the
yy 8 When you are finished, press EXIT.
LAN port.
Since there are various connection methods,
yy
please follow the specifications of your
telecommunication carrier or internet service
provider.
After connecting the LAN port, use the
yy
Premium or LG Apps menu.
ENTERTAINMENT 43
i.e)
Time Machine Ready USB Apps
USB IN 1 USB IN 2
ENGLISH
ENG
/DVI
COMPONENT
IN1
WIRELESS
IN 4
CONTROL
ꔡ
Y
LAN WAN
/DVI
Router
VIDEO
IN 3
PB
AV IN1
VIDEO
PR
/DVI
RS-232C IN (CONTROL&SERVICE)
@
IN 2
L/MONO AUDIO R
L
AUDIO
/DVI
IN 1 (ARC)
R
AV IN 2
ETHERNET
AUDIO / VIDEO
AUDIO IN OPTICAL
PTICAL
TICAL DIGIT
DIGITAL ANTENNA
TEN
EN CABLE
ABL Cable modem
LAN RGB IN (PC) (RGB/DVI) AUDIO OUT IN IN
COMPONENT IN 2 H/P
Internet
AUDIO / Y PB PR
NOTE
For enjoying pictures, music, or video stored
yy
on a PC using the router, a wired connection
is recommended.
When the wireless port of the router is used,
yy
there may be restrictions on some functions.
It is recommended that an Access Point
yy
(AP) be located more than 1 m away from
the TV. If the AP is installed closer than 1
m, the magic motion remote control may
not perform as expected due to frequency
interference.
44 ENTERTAINMENT
Select the wireless network setting type. For more information, check the AP manual.
iptime
ASW
Access Point
Network1 Search
� PIN ꔉ Connect
ꕉ Previous ꕯ Exit
ENGLISH
ENG
2 Press the Navigation buttons to select Setting
Ad-hoc network and press ENTER.
NOTE
When searching for wireless networks on
your PC using ad-hoc, the TV is named
LGTV10.
LGTV10 that appears in the list. (Select
yy
the same name as the network ID that
appears on your TV screen.)
46 ENTERTAINMENT
Tips for Network setting The use of a “Router” may not be allowed or its
yy
Use a standard LAN cable with this TV. Cat5 or
yy usage may be limited depending on the policies
better with a RJ45 connector. and restrictions of your ISP. For details, contact
Many network connection problems during set
yy your ISP directly.
up can often be fixed by re-setting the router or The wireless network operates at 2.4 GHz
yy
modem. After connecting the player to the home radio frequencies that are also used by other
network, quickly power off and/or disconnect household devices such as cordless telephone,
the power cable of the home network router or Bluetooth® devices, microwave oven, and can
cable modem. Then power on and/or connect be affected by interference from them.It can
the power cable again. be interrupted by the device using 5 Ghz radio
Depending on the internet service provider (ISP),
yy frequencies. It is same device with LG wireless
the number of devices that can receive internet media box, cordless telephone, other Wi-Fi
service may be limited by the applicable terms device.
of service. For details, contact your ISP. It may decrease the service speed using
yy
LG is not responsible for any malfunction of the
yy Wireless network by surrounding wireless
TV and/or the internet connection feature due to condition.
communication errors/malfunctions associated Turn off all unused network equipment in
yy
with your broadband internet connection, or your local home network. Some devices may
other connected equipment. generate network traffic.
LG is not responsible for problems within your
yy In some instances, placing the access point or
yy
internet connection. wireless router higher up away from the floor
Some content available through the network
yy may improve the reception.
connection may not be compatible with the The reception quality over wireless depends on
yy
ENGLISH
TV. If you have questions about such content, many factors such as type of the access point,
ENG
please contact the producer of the content. distance between the TV and access point, and
You may experience undesired results if the
yy the location of the TV.
network connection speed does not meet the To connect wireless AP, an AP that supports
yy
requirements of the content being accessed. the wireless connection is necessary, and the
Some internet connection operations may not
yy wireless connection function of the AP needs to
be possible due to certain restrictions set by the be activated. Please enquire to the AP supplier
Internet service provider (ISP) supplying your for the possibility of AP wireless connections.
broadband Internet connection. Please verify the security settings of AP SSID
yy
Any fees charged by an ISP including, without
yy for wireless AP connection, and enquire to the
limitation, connection charges are your AP supplier for the AP SSID security settings.
responsibility. The TV can become slower or malfunction
yy
A 10 Base-T or 100 Base-TX LAN port is required
yy with wrong settings of network equipments
when using a wired connection to this TV. If (wired/wireless router, hub, etc). Please install
your internet service does not allow for such a correctly by referring to the manual of the
connection, you will not be able to connect the equipment, and set the network.
TV. When AP is set to include 802.11 n, and if
yy
A DSL modem is required to use DSL service
yy Encryption is designated as WEP(64/128bit) or
and a cable modem is required to use cable WPA(TKIP/AES), the connection may not be
modem service. Depending on the access possible. There may be different connection
method of and subscriber agreement with your methods according to the AP manufacturers.
ISP, you may not be able to use the internet
connection feature contained in this TV or you
may be limited to the number of devices you
can connect at the same time. (If your ISP limits
sub-scription to one device, this TV may not
be allowed to connect when a PC is already
connected.)
ENTERTAINMENT 47
Network Status
ENGLISH
ENG
48 ENTERTAINMENT
Service Online
Weather Info Photo Album
Service The availability of and access to Content and
yy
ENG
5 3 6 7 8 9
ENGLISH
Option Description
ENG
1 Sign In, Sign in or sign out to the
Sign out premium service.
2 Exit Returns to TV viewing.
3 LG Apps Moves to the LG Apps.
4 Moves to the LG Apps you
want directly.
5 Search These functions may be not
6 Web Browser available for a certain period of
time depending on country or
7 Media Link product model. In such cases,
the buttons may be disabled.
They are enabled when the
services are available.
8 Quick Apps. Stores the most frequently
used apps among all
downloads. To change the list
of Quick Apps, see "Using My
Apps".
9 My Apps. Moves to My Apps.
You can browse all apps
installed, change the list of
Quick Apps, and select and
play the app you want.
50 ENTERTAINMENT
NOTE
If you wish to become a paid member or
yy 3 Manage the ID by using following menu.
change your information, please use your PC
and visit http://www.lgappstv.com . Option Description
Checks basic information, apps
Account
you purchased and apps installed
Setting
on your TV.
Sign in with LG Apps. account Change User Changes your account.
Sign Out Sign out the premium service.
To enjoy the LG Apps with your account, you need
sign in with the LG Apps account.
ENGLISH
ENG
NOTE
You can download a paid app on up to five
yy
TVs.
ENTERTAINMENT 51
1 2 3 4 5 Horoscope
Game
Search My Apps. Back Exit
LG Apps
6 Install
Rate this App
8
HOT
7 4
6 SUN
Final update date 2011/1/2
0 Ratings
★★★★★ ꔍ
TOP
PAID
Option Description
Option Description 1 Sign in/out Sign in or out to use the LG
1 Sign in/out Sign in or out to use the LG Apps.
Apps. 2 My Apps. Move to My Apps.
2 Search Search the LG Apps. 3 Back Move to the previous screen.
3 My Apps. Move to My Apps. 4 App Shows the description of the
4 Back Move to the previous screen. description current Apps.
5 Fee Shows the fee of the current
ENGLISH
5 Exit Exit the LG Apps.
app.
ENG
6 Apps Sorting yyHot: Most downloaded
apps in the past 7 days 6 Install Install or purchase the App.
yyNew: Most recently You can purchase an app on
released apps either your PC or TV, but it
yyTop Paid: Most downloaded can be installed and played
paid apps only on the TV.
yyTop Free: Most downloaded yyIf you want to purchase a
free apps paid app, you need to sign
yyAll: Alphabetical order up as a paid member on
yyMoves to the previous or www.lgappstv.com.
next page using CH (^, v) yyIf the available space of
button. your TV is not enough, you
can download apps in the
7 Apps Category Shows the LG Apps category USB storage device by
(All, Game, Entertainment, connecting it to the USB IN
Life, Education, News) 2 port.
8 Live TV Watches the current channel. yyYou can play, delete or
move the apps stored in
the USB storage device on
the My Apps screen.
7 Rate this App Rate the app you purchased
with stars.
8 App info. Shows the creator/program
version/update date/volume/
rating of the current Apps.
NOTE
To store apps in the USB storage device,
yy
make sure that it is connected to the USB IN
2/USB Apps port.
Up to 1000 apps can be stored as USB apps.
yy
The USB storage device containing apps
yy
cannot be used for storing other types of
data.
52 ENTERTAINMENT
6 Sign In the LG Apps. device. LG Electronics disclaims any and all liability
After sign in, manage the ID option (including liability based on third-party claims) for
(Account Setting, Change User, Sign
Out).
any infringing or unauthorized use or misuse of
7 Edit the My Apps. content or services by you.
YOU EXPRESSLY ACKNOWLEDGE AND AGREE
8 Exit the My Apps.
THAT THE DEVICE AND ALL THIRD PARTY,
9 Move to the Home menu.
APPLICATION CONTENT AND SERVICES ARE
- Delete the Apps.
PROVIDED “AS IS” WITHOUT WARRANTY
OF ANY KIND, EITHER EXPRESS OR IMPLIED.
LG ELECTRONICS EXPRESSLY DISCLAIMS
ALL WARRANTIES AND CONDITIONS WITH
RESPECT TO ANY CONTENT, APPLICATION
AND SERVICES, EITHER EXPRESS OR, IMPLIED,
INCLUDING BUT NOT LIMITED TO, WARRANTIES
OF MERCHANTABILITY, OF SATISFACTORY
QUALITY, FITNESS FOR A PARTICULAR
PURPOSE, AND NON-INFRINGEMENT OF
THIRD PARTY RIGHTS. LG ELECTRONICS DOES
NOT GUARANTEE THE ACCURACY, VALIDITY,
TIMELINESS, LEGALITY, OR COMPLETENESS
OF ANY CONTENT, APPLICATION OR SERVICE
MADE AVAILABLE THROUGH. THIS DEVICE
AND DOES NOT WARRANT THAT THE DEVICE,
CONTENT, APPLICATION OR SERVICES WILL
MEET YOUR REQUIREMENTS, OR THAT
OPERATION OF THE DEVICE, CONTENT,
APPLICATION OR SERVICES WILL BE
UNINTERRUPTED OR ERROR-FREE. UNDER NO
ENTERTAINMENT 53
ENGLISH
or liability for any change, interruption, disabling, intended.
ENG
removal of or suspension of any content, The web browser on this device does not
yy
application or service made available through this support downloading of files or fonts.
device. The web browser on this device is a TV browser.
yy
LG Electronics is neither responsible nor liable It may work differently to PC browsers.
for customer service related to the content,
application and services. Any question or request
for service relating to the content, application or
Using Web Browser
services should be made directly to the respective
content and service providers or application 1 Connect to the network.
developers, as appropriate. 2 Press Home to access the Home menu.
3 Press the Navigation buttons to scroll to the
Web Browser and press ENTER.
www.lg.com OK
3 Press the Navigation buttons to scroll to the
http://www.lg.com Web Browser and press ENTER.
1 2 3
6 You can browse websites on your TV.
Select the browser input window to display the Browser Home
keyboard at the bottom of the screen. URL Favorites History 1/1 page
5 6 7
ENG
Option Description
Menu Exit
1 Browse a website by directly entering
the URL address.
1 2 3 4 5 6 7 2 Select a website in Favorites.
Option Description 3 View the list of recently viewed web
pages.
1 Move to the previous page.
2 Move to the Favorites screen.
4 Select a site to browse.
1 2 3 1 2 3
Browser Home Browser Home
4
www.lg.com OK
r http://www.wingspoon.com/seoul/index.nhn?
http://me2day.net/
http://www.lg.com
4 http://www.naver.com/
http://www.facebook.com/
5 http://twitter.com/
http://www.paran.com/
http://paran.com/
6 e http://kr.yahoo.com/?p=us
7
ENG
w http://www.nate.com
ENGLISH
Clear History Back Exit
Clear similar URL Back Exit
ENG
8 9 - 5 6 7
Option Description Option Description
1 Browse a website by directly entering 1 Browse a website by directly entering
the URL address. the URL address.
2 Select a website in Favorites. 2 Select a website in Favorites.
3 View the list of recently viewed web 3 View the list of recently viewed web
pages. pages.
4 Enter the URL address. If the address 4 Display a list of recently visited pages.
entered is similar to any of the sites Select an item to move to the page.
previously visited, a drop-down list will 5 Clear the visited website list.
be displayed.
6 Move to the previous screen.
5 Use the keyboard to enter the address.
7 Exit the web browser.
Select characters to enter.
6 Select the keyboard language.
7 Change the keyboard.
8 Clear the similar addresses appearing
below the address input field.
9 Move to the previous page.
- Exit the web browser.
q Hide the keyboard. Select the address
input field to display the keyboard again.
w Move the cursor left or right.
e Delete the text before the cursor, one
character at a time.
r Press this after entering the address to
go to the website.
56 ENTERTAINMENT
power adapter.
If the TV does not recognize a connected
yy
/DVI
ꔡ
try again. Do not use an excessively long
/DVI
IN 3
cable.
To disconnect a USB storage device, The TV does not support some USB storage
yy
/DVI
prevent damages to the TV or files. You can use a multi-partition (up to 4) USB
yy
ENG
/DVI
IN 1 (ARC)
ENGLISH
Please refer to "Smart Share Function" for
If there is an abnormal operation or an
yy
ENG
additional information on supported file types and
error occurs in Nero Media Home, the
other instructions.
DLNA option may not work properly. In this
case, exit Nero Media Home and restart
the program. You can download the latest
version of Nero Media Home by clicking
the question mark at the bottom-left of the
program.
When the network is unstable, the device
yy
may be slower or may need to load during
playback.
When playing a video in DLNA mode, the
yy
Multi Audio and Closed Caption features are
not supported.
When selecting Full Screen in DLNA mode,
yy
the ratio of the outputted screen may differ
from the original.
When more than one TV is connected to
yy
a single server in DLNA mode, a file may
not play properly, depending on the server
performance.
If the play time information is not provided
yy
by the server, it is displayed as “- -.”
58 ENTERTAINMENT
Installing Nero MediaHome 4 Essentials 7 Click Typical and click Next. The installation
Nero MediaHome 4 Essentials is an easy to use process is started.
DLNA server software for Windows. 8 If you want to take part in the anonymous
collection of data, select the check box and
Computer requirements for Nero MediaHome 4 click the Next button.
Essentials
Windows® XP (Service Pack 2 or higher),
yy
9 Click the Exit button to complete the
installation.
Windows Vista® (no Service Pack required),
Windows® XP Media Center Edition 2005 Sharing files and folders
(Service Pack 2 or higher), Windows Server®
2003 (Service Pack 1 or higher) After installing Nero MediaHome, you must add
Windows® 7 Home Premium, Professional,
yy folders you wish to share.
Enterprise or Ultimate (32 and 64-bit) 1 Double-click the Nero MediaHome 4 Essentials
Windows Vista® 64-bit edition (application
yy icon on the desktop.
runs in 32-bit mode)
Windows® 7 64-bit edition (application runs
yy 2 Click Network icon on the left and define your
in 32-bit mode) network name in the Network name field. The
Hard drive space: 200 MB hard drive space
yy Network name you enter will be recognized by
for a typical installation of Nero MediaHome your TV.
stand-alone
3 Click Shares icon on the left.
1.2 GHz Intel® Pentium® III or AMD
yy
Sempron™ 2200+ processors 4 Click Local Folders tab on the Shared screen.
Memory: 256 MB RAM
yy
5 Click Add icon to open the Browse Folder
ENGLISH
window.
memory, minimum resolution of 800 x 600
pixels, and 16-bit color settings 6 Select the folder containing the files you want
Windows® Internet Explorer® 6.0 or higher
yy to share. The selected folder is added to the
DirectX® 9.0c revision 30 (August 2006) or
yy list of shared folders.
higher
Network environment: 100 Mb Ethernet,
yy
7 Click Start Server icon to start the server.
WLAN (IEEE 802.11g), or faster
NOTE
If the shared folders or files are not displayed
yy
1 Start up your computer. on the TV, click the folder on the Local
2 Close all Microsoft Windows programs and exit Folders tab and click Rescan Folder at the
any anti-virus software that may be running. More button.
Visit http://www.nero.com for more
yy
3 Insert the Nero MediaHome 4 Essentials CD- information and software tools.
ROM into your computer’s CD-ROM drive.
ENGLISH
media server used.
ENG
There may be some restrictions by file
yy
features and the media server that restrict
playback.
Movie thumbnail is only supported when
yy
DLNA server supports a Movie thumbnail.
If there is an unplayable music file in the
yy
Smart Share menu, the TV will skip the file
and play next file.
Files in a folder can be played only when
yy
they are of the same type.
The file information indicated on the screen
yy
may not always correct for music and movie
files in Smart Share menu
This TV only supports movie subtitle files
yy
supplied by Nero MediaHome 4.
The subtitle file name and movie file name
yy
have to be the same and located in the same
folder.
If subtitle files have been added after a
yy
directory has been indexed already, the user
has to remove and re-add the folder to the
list of shares.
The DRM/*.tp/*.trp file in DLNA server is not
yy
played while Movie List is in operation.
MPO files are not played when Photo List is
yy
in operation.
The playback and operating quality of the
yy
60 ENTERTAINMENT
Server Name
MYPC1
ENGLISH
ꘃ Page Change
All Media
Progressive
ENG
USB1 External All Media Movie List Photo List Music List
Page 1/2
4
Drive 1 Photo size yyMin: 64 x
5 64
yyMax -
Normal
Type:
15360 (W)
x 8640 (H)
� Change device � Go to root folder � Go to upper folder Exit 6 yyProgressive
Type: 1920
(W) x 1440
No. Description (H)
1 Shows all media folders. 3D mpo Supported yympo
(For file format
2 Current page number/total number of pages.
3D TV)
3 Moves to the previous or next page. Photo size yy4:3 size:
3,648 x
4 Current page number/total number of pages. 2,736
5 Files info or thumbnail. 2,592 x
1,944
6 Available buttons on the remote control.
2,048 x
1,536
yy3:2 size:
Thumbnail information 3,648 x
2,432
Type Abnormal files Non-supported files
Music yyMP3
yyBit rate range: 32 Kbps - 320 Kbps
Video yySampling rate (Sampling Frequency)
MPEG1 layer 3: 32 kHz, 44.1 kHz, 48 kHz
Photo MPEG2 layer 3: 16 kHz, 22.05 kHz, 24 kHz
* A copy-protected file will not play.
Music
62 ENTERTAINMENT
Button Description 3D
Views the 3D imaging.
(For 3D TV)
Navigation
Scrolls through the files. Hides the menu on screen.
button
BACK To see the menu again, press
ENTER Plays the highlighted file. ENTER button to display.
CH (^, v) Moves to the previous or next Moves to the previous menu
page. EXIT
screen.
Change device: Changes to a
Red button
different input.
Green button Go to root folder.
Yellow
Go to upper folder.
button
ENTERTAINMENT 63
Tips for playing video files The TV may not play the video files in the
yy
The TV does not support the files encoded in
yy supported file format depending on the
Motion JPEG. encoded condition.
Some user-created subtitles may not work
yy Trick Mode does not support other functions
yy
properly. than ꕙ if video files do not have index
Subtitles may not display some special
yy information.
characters or HTML tags. Video file names that contain special
yy
Changing font and color in subtitles is not
yy characters may not be playable.
supported. For 3D WMV files encoded in dualstream,
yy
Subtitles in non-supported languages are
yy 3D mode is not supported. (For 3D TV)
unavailable.
Video files with subtitle files of 1 MB or
yy
larger may not be played properly.
The screen may suffer from temporary
yy
interruptions such as image stoppage or
faster playback when you change the audio
language.
If you play a damaged video file, the video
yy
file may not be played correctly or some
player functions may not be unavailable.
The TV may not properly play the video files
yy
produced with certain encoders.
If the recorded file does not have video or
yy
ENGLISH
audio, either video or audio is not outputted.
ENG
If the TV plays the recorded file without
yy
video or audio, either video or audio is not
outputted.
The TV may not smoothly play the video files
yy
with a resolution higher than the supported
resolution for each frame.
The TV may not properly play the video
yy
files not included on the specified type and
format.
The TV may not play the files encoded with
yy
GMC (Global Motion Compensation) or
quarter-pel motion estimation.
The TV supports the only 10,000 sync blocks
yy
within the subtitle file.
The TV supports the H.264/AVC codec up to
yy
the profile level 4.1.
The TV does not support DTS audio codec.
yy
The TV cannot play a video file whose size
yy
is larger than 30 GB. The file size limit is
dependent on the encoding environment.
If you play a video file through the USB
yy
connection that does not support the high
speed, the video player may not work
properly.
The video file and its subtitle should be in
yy
the same folder and the name of the video
file and subtitle should be identical.
64 ENTERTAINMENT
Language
select the language within the subtitle.
ENG
ENGLISH
Registration code : xxxxxxxxxx Continue with registration?
ENG
Register at http://vod.divx.com
Yes No
Close
NOTE
While you are checking the registration code,
yy
some buttons may not work.
If you use the DivX registration code of
yy
another device, you cannot play the rented
or purchased DivX file. Make sure to use the
DivX registration code assigned to your TV.
The video or audio files that are not
yy
converted by the standard DivX codec may
be corrupted or not be played.
The DivX VOD code allows you to activate
yy
up to 6 devices under one account.
66 ENTERTAINMENT
1 Press Q. MENU.
A pop-up window will appear.
2 Press the Navigation buttons to scroll to the
option and press ENTER.
BGM NOTE
yyYou cannot change the music
folder while the background
music is playing.
ENGLISH
ENG
NOTE
Option values changed in Photo List do not
yy
affect Movie List and Music List.
Option values changed in Photo List or
yy
Music List are changed likewise in Photo List
and Music List, but not Movie List.
Set Video.
Allows you to change Video settings. (Refer to
"PICTURE Settings" on page 92).
Set Audio.
Allows you to change Audio settings. (Refer to
"AUDIO Settings" on page 97).
68 ENTERTAINMENT
USB2 External M1 M2 M3
Page 1/2
Share and press ENTER. 005. - B05.mp3 006. - B06.mp3 007. - B07.mp3 008. - B08.mp3
00:00 00:00 00:00 00:00
4 Press the Navigation buttons to scroll to Music 001. - B01.mp3 � 00:03 / 02:58
NOTE
Option values changed in Movie List does
yy
not affect the Photo List and Music List.
Option value changed in Photo List and
yy
Music List are changed likewise in Photo List
and Music List.
ENTERTAINMENT 69
Set Audio.
Allows you to change Audio settings. (Refer to
"AUDIO Settings" on page 97).
NOTE
The TV will not play copy protected files.
yy
If the TV is not in use for some time
yy
during playback, the information box as a
screensaver will appear to prevent image
burn.
To return to the Music list screen, press
ENTER.
File name
002. B02.mp3
� 00:31 / 04:04
ENGLISH
ENG
70 ENTERTAINMENT
Media Link
M's PC Movies
1 2
Movies
M's PC
Music
M's PC
TV show
M's PC
Video
Plug-i...
Music
Plug-i...
Picture
Plug-i...
1
3 4 5 6 7 2
Option Description Search Filter Back Exit
ENGLISH
Change the section sorting. 1 Show information for the selected movie.
3
ENG
yyBy server name: Sort the list by server 2 Show images captured from the movie file.
name.
yyBy item name: Sort the list by item 3 Search movies within the section.
name.
Display the list according to the selected
4 Select another device. 4 filter.
Using PLEX Online, you can install, remove Select to play the movie in full screen
5 or update applications on the computer. mode. If the movie has already been
5 played, you can continue from the last
6 Move to the previous screen.
scene.
7 Exit Media Link.
6 Move to the previous screen.
7 Exit Media Link.
72 ENTERTAINMENT
1 Press Home to access the Home menu. 1 Press Home to access the Home menu.
2 Press the Navigation buttons to scroll to the 2 Press the Navigation buttons to scroll to the
Media Link and press ENTER. Media Link and press ENTER.
3 Press the Navigation buttons to scroll to the 3 Press the Navigation buttons to scroll to the TV
Music section and press ENTER. Show section and press ENTER.
Media Link Aussies
M's PC Music
M's PC TV Show > TV Sitcom > Season 2
1 1
2 3 3
2
4 5 6 7 4 5 6 7
Option Description Option Description
ENGLISH
Sort the music files in the selected section Sort the TV program files in the selected
1
ENG
in the order of artist > album > song title. 1 section in the order of Program name >
2 Select a folder or a song. season > episode.
Show the artist, album and information for 2 Select a folder or a program.
3
the selected music. 3 Show information for the selected
4 Search music files within the section. program.
Display the list according to the selected 4 Search TV Programs within the section.
5 filter. Display the list according to the selected
5 filter.
6 Move to the previous screen.
7 Exit Media Link.
6 Move to the previous screen.
7 Exit Media Link.
ENTERTAINMENT 73
Installing Plug-Ins
Media Link allows you to install plug-ins to enjoy
media content on the web.
Back Exit
3 4
Option Description
Move the cursor to a plug-in to view the
ENGLISH
plug-in information on the right pane.
ENG
Plug-ins already installed: You can run,
update, reinstall or remove them.
1 Plug-ins not yet installed: You can install
them.
Once installed, you can run the plug-in by
selecting Video, Music or Picture Plug-in
from the Media Link main screen.
2 A list of plug-ins available for installation.
3 Move to the previous screen.
4 Exit Media Link.
74 ENTERTAINMENT
É
and rewind normal TV viewing at any time without
missing any of the live broadcast. ! Initializing will delete all existing data
in the USB device. Once initialized to
Time Machine and Recording functions may not DVR format, the USB device cannot
be used with PC. To continue to
work if the signal strength is weak. initialize, select OK.
This function is only operated after initializating
OK Cancel
USB Device.
É
Connecting USB storage devices i Initialization completed. Ready to record.
Close
USB IN 1
device.
ENGLISH
IN 4
ENG
2 Press the Navigation buttons to scroll to OK
/DVI
IN 3
Time Machine Mode change during using Time USB Device Reinitialization during using Time
Machine Machine
Record/Schedule
Time Machine Mode ◀ OnFree
▶ Space 100GB 1 After connecting USB device, press the ENTER
� 79h 03m � 31h 37m
Schedule list Initialization button.
Apr.2 2010 15:30
You can see the recorded TV.USB storage device Initialization
2 Press Yellow button to show the Time
Select schedule by Select schedule Machine option menu and press Q.MENU.
Recorded TV Schedule List
Close date by program
� Recording starts.
2 Press the Navigation buttons to scroll to USB
storage device Initialization and press ENTER.
ꔄ Recording starts ꘩ Option Exit
BACK.
ENG
Menu Description
ENGLISH
1Preview in 3D.
ENG
2Current location and Progress time in playback
3Total progress time of the Time Machine
Playback
Fast forward
Rewind
Pause
Direct view +
Direct view -
By one screen
Slow playback
78 ENTERTAINMENT
playback,
ENG
Recording stop
Manual Timer
Recording end time modify This function is easy to register to reserved
recording. Timer recording is set.
Close
Free Space 100GB
ꔄ Recording starts. Record/Schedule
� 79h 03m � 31h 37m
É
Start Time 10 : 37
ꔄ Recording starts ꘩ Option Exit
End Time 13 : 37
É
ENTER Cancel
2 Press Navigation buttons to scroll to Recording Sun. Mon. Tue. Wed. Thu. Fri. Sat.
Apr.2 2010
31
end time modify and press ENTER. 28 29 30 1 22 3
Once ꔉ
ꔡ
Daily
4 5 6 7 8 9 10
3 Press Navigation buttons to scroll to set the Weekly (Fri.) No schedule list
11 12 13 14 15 16 Mon.
17 ~ Fri.
recording end time and press ENTER.
ENGLISH
18 19 20 21 22 23 24
ENG
Cancel
NOTE
ꔂ Move ꔉEnter
When recording, if the available storage
yy
� Program Guide � Schedule List Exit
space is not sufficient, the recording will
automatically Stop.
Recordings of less than 10 seconds will not
yy
1 After connecting USB device, press the ENTER
be saved. button.
Recording available time is maximum 5
yy 2 Press Yellow button.
hours.
To save disk space while recording
yy 3 Press Navigation buttons to scroll to Select
broadcasts, no data will be saved if there is schedule by date and press ENTER.
no signal.
The recording function will not initiate for a
yy 4 Press Navigation buttons to scroll to select a
copy-protected program. date and press ENTER.
The displayed time may differ slightly from
yy
the actual time. 5 Press Navigation buttons to scroll to select
When there is no signal or a film source is
yy repeat option and press ENTER.
being viewed, the displayed time may differ
6 Press Navigation buttons to scroll to set the
slightly from the actual time.
schedule type, time and program and press
ENTER.
É
ꔄ Recording starts ꘩ Option Exit
! The schedule list is deleted after
initialization. To continue
initialization, select OK.
É
ꔀ Move ꔉ Modify/Delete
� Manual Timer � Program Guide Exit 4 Press Navigation buttons to scroll to OK and
press ENTER.
1 After connecting USB device, press the ENTER Start the Schedule List Initialization.
button.
5 When you are finished, press EXIT.
2 Press Yellow button. When you return to the previous menu, press
BACK.
3 Press Navigation buttons to scroll to Schedule
List and press ENTER.
Program Guide
NOTE
This function is easy to register to reserved Recording is not possible with copy-protected
yy
recording (Refer to "EPG (Electronic Program programs.
Guide) Function (In digital mode)" on page 85).
Free Space 100GB i Program with copy protection : failed to record.
Record/Schedule � 79h 03m � 31h 37m
failed.
If different programs are set for the same
yy
Program Guide
▲
time for on time and reserved recording, this
That ’70s show 25 Nov. 2008 10:05 TV is powered on to the reserved recording
DTV 1 YLE TV1 25 Nov. 2008 09:45~10:15
program.
ALL NOW NEXT
If you turn off the power during the
yy
1 YLE TV1 That ’70s show Keno
recording, the program being recorded may
2 YLE TV2 Your World Today World Business
4 TV.. Legenen om Den.... Fantomen not be saved. Therefore it is good to press
5 YLE FST Naturtimmen Kritiskt the STOP (�) button and check the reserved/
6 CNN Lyssna ABC
recorded list, and then turn off the power.
8 YLE24 Glamour Tänään otsikoissa
Recording cannot be reserved for a period
yy
ENGLISH
▼
ENG
� Mode � Manual Timer � Schedule List � Favorite
less than 10 seconds.
Because the title and time of the program for
yy
1 After connecting USB device, press the ENTER Record/Remind is based on the information
button. transmitted from the broadcasting station,
they may be different than the actual
2 Press Yellow button. ones depending on the situation of the
3 Press Navigation buttons to scroll to Select broadcasting station.
schedule by program and press ENTER. Recording time may differ depending on
yy
resolution of input signal or USB HDD
4 Press Navigation buttons to scroll to select a capacity.
program and press ENTER. When it is time for the reserved recording
yy
5 When you are finished, press EXIT. to start and the power of the TV is turned
off, the TV will turn on the power of the part
When you return to the previous menu, press required for the recording and proceed to the
BACK. reservation.
When it is time for the reserved recording
yy
to start and the Immediate recording is
in progress, the recording of the program
currently being recorded will be stopped and
saved, and then proceed to the reserved
recording.
If the TV is unplugged once or turn off, the
yy
reserved recording will not work.
82 ENTERTAINMENT
Recorded TV NOTE
You can view the recorded program list at a If there is a bad sector in the disk, part or
yy
glance. all of the items of the Recording list can be
The recorded program stored in the USB device deleted.
can be played. Maximum number of recordings within the
yy
Recording list is 200. When the number of
Recorded TV List recordings in the Recording list is 200, you
cannot record any more.
� When the full duration of the recording
yy
is played back, the screen will stay in the
�� 00:35
stopped condition for 10 seconds and then
05:35
1/1 Page
This noise is irrelevant from the performance
yy
D1 D2
Playing time 00:02:30 /Date:2010.01.01 Playing time 00:02:30 /Date:2010.01.01
and reliability of the product and is normal
D3
Playing time 00:02:30 /Date:2010.01.01 for a hard drive to have a certain level of
noise.
The program recorded at other TV can’t be
yy
played back in accordance with copyright
ENGLISH
� Mark Mode
policy. If you attempt to play back the
ENG
Exit
Recorded TV �Play ꘃPage Change You can play a selected program from the
Free Space 100GB
recorded list.
USB USB1 XTICK
� 79h 03m � 31h 37m
D1
Playing time 00:02:30 /Date:2010.01.01
D2
Playing time 00:02:30 /Date:2010.01.01
1 3
2
D3
Playing time 00:02:30 /Date:2010.01.01
�� 00:35
05:35
ꔅ Unmark All ꔅ Mark All ꔅ Play Marked ꔅ Deleted Marked � Exit Mark Mode 1 After connecting USB device, press the ENTER
button.
1 After connecting USB device, press the ENTER
button. 2 Press Green button to select Recorded TV.
2 Press Green button to select Recorded TV. 3 Press Navigation buttons to select recorded
program and press ENTER.
3 Press FAV to mark your desired recorded
program. 4 Press Green button to select Option and press
ENTER.
4 Press Navigation buttons to select a desired
recorded program. 5 When you are finished, press EXIT.
When you return to the previous menu, press
5 Press Yellow button to play the marked BACK.
recorded program.
Menu Description
Button Description
ENGLISH
Play on previous Resumes playing at the
ENG
Red button Unmark All: Change marked playtime. previously stopped point.
recorded programs to unmarked
recorded programs. Play from the start Playback of selected
recorded programs.
Green button Mark All: Mark all recorded
programs in the list. Rename Rename the program.
Yellow button Play Marked: Play the first Delete Delete the program.
selected file. Once recorded
programs finishes playing, the
next selected one will be played
automatically.
ENGLISH
Green button Enter Date setting mode.
ENG
Yellow button Enter Manual Timer mode (See p.79).
Select a program Blue button Enter Schedule List mode (See p.80).
When ‘Currently broadcasting program
1 Press Navigation buttons or CH (∧∨) to select is selected, it is moved to selected
program and EPG disappears.
desired program. ENTER
When ‘Future broadcasting program’ is
Program Guide
selected, a reservation pop-up window
▲ appears.
That ’70s show 25 Nov. 2008 10:05
< or > Select Program.
DTV 1 YLE TV1 25 Nov. 2008 09:45~10:15
ENGLISH
TV size, viewing angle & other circumstances
ENG
distorted images.
may change the viewing distance and the angle of
( LCD )
view.
yy We recommend that you maintain a distance of
at least twice the screen diagonal length when Viewing Distance Maximum Viewing Distance
watching 3D videos. 2m-7m 10 m
(Plasma
)
yy After powering on the TV, a few seconds
may be needed for your TV to calibrate.
yy The TV may flicker slightly if the 3D imaging
is displayed under 3 wavelength fluorescent
light (50 Hz - 60 Hz) or magnetic fluorescent
lamp (50Hz - 60 Hz). In such instances, it is
recommended to turn the lights off.
yy If there is an obstacle between the TV and
the 3D glasses, the 3D imaging may not
display properly.
yy Do not use the TV in close proximity to other
electronic equipments and RF equipments.
yy The 3D imaging may not display if it is
viewed while you are lying down.
yy It may take a moment for you to see the
3D imaging if you look away from the TV
and then revert your eyes back to the 3D
program.
88 3D IMAGING
1 Play the video produced in 3D. 1 Press the 3D OPTION while viewing 3D
imaging.
2 Press 3D to watch 3D imaging. A pop-up window will appear.
3 Wear the 3D glasses. 2 Press the Navigation buttons to scroll to one of
the following options and press ENTER.
4 Press the Navigation buttons to scroll the OK
and press ENTER. Choose options.
screen in 3D mode.
ENG
Set Video.
Allows you to change Video settings (Refer to
"PICTURE Settings" on page 92).
Set Audio.
Allows you to change Audio settings (Refer to
"AUDIO Settings" on page 97).
CAUTION
Some menus may not work while viewing
yy
3D imaging.
The 3D imaging is disabled automatically
yy
when switching input source or DTV channel.
The screen may not be displayed properly if
yy
you view 2D images in 3D imaging mode.
3D effect can be seen when 3D Mode is
yy
selected appropriately for the 3D input signal
supplied to the TV.
For *mpo files (3D camera files), the 3D
yy
imaging mode is enabled automatically.
ENGLISH
NOTE
ENG
( LCD
)
yyIf viewing 3D imaging, “Power indicator” is
turned off automatically.
yyYou can only choose "Off or Cinema" with
the AV MODE button on the remote control.
yyEnergy Saving is disabled while playing in
3D.
yyHome menu is not available while playing in
3D.
yyYou cannot enter the Home menu while
watching 3D imaging.
90 CUSTOMIZING SETTINGS
CUSTOMIZING TV SETTINGS
The SETUP Menu
1 Press Home to access the Home menu.
2 Press the Navigation buttons to select the SETUP menu and press ENTER.
3 Press the Navigation buttons to scroll to one of the following menus and press ENTER.
4 Press the Navigation buttons to scroll to the setting or option you want and press ENTER.
5 When you are finished, press EXIT.
Menu Description
Customizing Settings
SETUP Settings
SETUP
1 Press Home to access the Home menu. ꔂ Move ꔉ Enter Exit
• Auto Tuning
2 Press the Navigation buttons to scroll to SETUP and press ENTER. • Manual Tuning
• Channel Edit
3 Press the Navigation buttons to scroll to SETUP and press ENTER.
4 Press the Navigation buttons to scroll to the setting or option you
want and press ENTER.
- To return to the previous level, press BACK. ?
ENGLISH
ENG
92 CUSTOMIZING SETTINGS
2 Press the Navigation buttons to scroll to SETUP and press ENTER. • ꕊ Energy Saving : Off
• Picture Mode : Standard
4 Press the Navigation buttons to scroll to the setting or option you • Color 60
• Tint 0 R G
want and press ENTER. • Color Temp. 0 W C
Picture Wizard Adjusts the image quality and calibrates the screen.
ENG
NOTE
yyIf you use Picture Wizard, the Energy Saving feature will turn off automatically.
yyTo reset changes made by Picture Wizard, operate Picture Reset when Picture Mode is on
Expert1.
Energy Saving Reduces the power consumption by adjusting the screen brightness.
NOTE
yyWhen selecting Auto or Maximum, Backlight will not work ( LCD
).
Option
Auto ( LCD
) The backlight is adjusted automatically corresponding to the surroundings
when selecting Auto using the Intelligent sensor feature.
Intelligent sensor The most suitable picture is automatically adjusted corresponding to the
( )
Plasma
surroundings.
Off Select if this feature is not necessary.
Minimum/ Selects the brightness level.
Medium/Maximum
Screen off The screen turns off in 3 seconds.
Pressing any button of the remote control will turn on the screen again.
CUSTOMIZING SETTINGS 93
Setting Description
Picture Mode Selects one of the preset image or customizes options in each mode for the best TV screen
performance. You are also able to customize advanced options of each mode.
The available preset picture modes vary depending on the TV.
NOTE
yy( LCD ) If you select Intelligent Sensor, the Energy saving feature will switch to Auto
automatically .
yyIf you select THX Cinema or THX Bright Room, the Aspect ratio feature will switch to Just
scan automatically.
ENGLISH
adjustments.
ENG
»»THX Cinema express the optimal screen quality when the room is dark.
»»THX Bright Room express the optimal screen quality when the room is
bright.
NOTE
yyTHX : THX (Thomlinson Holman’s Experiment) is an audio and video
certification standard established by George Lucas and Thomlinson. A
THX certified display guarantees screen quality that exceeds the display
standard specification in both hardware and software.
Sport Optimizes the video image for high and dynamic actions by emphasizing
primary colors such as white, grass, or sky blue.
Game Optimizes the video image for a fast gaming screen for PCs or games.
Photo Optimizes the still image like a photo file in HDMI, USB mode (ie, when
connecting the external device like a DSLR)
Expert 1, 2 or Adjusts the detailed video image settings for video experts as well as general
ISFccc Expert 1, 2 viewers.
NOTE
yyISFccc (ISFccc: Imaging Science Foundation Certified Calibration Control)
: This TV contains the detailed calibrations necessary for professional
certification by the Imaging Science Foundation. The resulting ISF “day”
and “night” modes will then be accessible by the user to experience
the best their LG HDTV has to offer.
Sophisticated and detailed calibrations can be made through the ISFccc
mode.
Detailed calibration requires a licensed technician. Please contact your
local dealer to inquire about an ISF certified technician.
94 CUSTOMIZING SETTINGS
Setting Description
TruMotion Advance video technology that provides clearer, smoother images, even during fast action scenes
(Depending on creating a more stable structure for a crisper picture.
model) TruMotion works with all inputs except PC mode.
If you enable “TruMotion”, noise may appear on the screen. If this occurs, set “TruMotion” to “Off”.
If you select “Picture Mode-Game ”, set “TruMotion” to “Off”.
Mode
High Provides smoother picture movement.
Low Provides smooth picture movement. Use this setting for standard use.
Off Turn off TruMotion operation.
User De-Judder: Adjusts noise of the screen.
De-Blur: Adjusts after-image of the screen.
SCREEN Customizes the PC display options.
Option
Resolution Selects a proper resolution.
Auto Configure Sets the TV to optimize the options automatically for the TV display.
Position Locates the image at the proper position.
Size Adjusts the image size.
Phase Eliminates horizontal streaking.
Reset Restores the options to the default setting.
LED Local After analysing the signal of the input video by areas of the screen, it adjusts the backlight to
Dimming improve the contrast ratio.
ENGLISH
(Depending on
ENG
model) Mode
Off Turn off LED Local Dimming operation.
Low Brightens the picture and deepens black levels using the soft local dimming.
Medium Deepens black levels using the strong local dimming.
High Clears the picture and deepens black levels using the strong local dimming.
Setting Description
Backlight ( LCD
) Adjusts the brightness of the screen by controlling the LCD backlight. If you decrease the
brightness level, the screen becomes darker and the power consumption will be reduced
without any video signal loss.
NOTE
yyIf you use the “Energy saving - Off, Minimum, Medium”, Backlight will be available.
Contrast Increases or decreases the gradient of the video signal. You may use Contrast when the
bright part of the picture is saturated.
Brightness Adjusts the base level of the signal in the picture.
Sharpness Adjusts the level of sharpness in the edges between the light and dark areas of the picture.
The lower the level, the softer the image.
Color Adjusts intensity of all colors.
Tint Adjusts the balance between red and green levels.
Color Temp. Set to warm to enhance hotter colors such as red, or set to cool to enhance cooler colors
such as blue.
CUSTOMIZING SETTINGS 95
Setting Description
Advanced Control or Customizes the advanced options.
Expert Control
Picture Reset Restores the options of each mode to the factory default.
Setting Description
Dynamic Contrast Adjusts the contrast to keep it at the best level according to the brightness of the screen.
The picture is improved by making bright parts brighter and dark parts darker.
Dynamic Color Adjusts screen colors so that they look livelier, richer and clearer. This feature enhances hue,
saturation and luminance so that red, blue and green white look more vivid.
Skin Color It detects the skin area of video and adjusts it to express a natural skin color.
Noise Reduction Reduces screen noise without compromising video quality.
MPEG Noise Reduction Removes noise caused by compressing video.
Super Resolution Provides a crystal-clear picture by improving the details in an area that has a blurry or unclear
picture.
Gamma You can adjust brightness of dark area and middle gray level area of the picture.
»»Low: Make the dark and middle gray level areas brighter.
»»Medium: Express the original picture level.
»»High: Make the dark and middle gray level area darker.
Black Level ets black level of the screen to proper level. This function is available in the following
S
modes: TV(NTSC-M/J, PAL-M, PAL-N), AV (NTSC-M/J, PAL-M, PAL-N), HDMI or Component.
ENGLISH
»»Auto: Realizing the black level of the screen and set it to High or Low automatically.
ENG
»»Low: The reflection of the screen gets darker.
»»High: The reflection of the screen gets brighter.
Clear White Make the white area of screen brighter and more white.
Eye Care Adjusts the brightness of the screen to prevent the screen from being too bright. Dims
extremely bright pictures.
This feature is enabled in “Picture Mode-Standard, Game”.
Real Cinema or Film Makes video clips recorded in film look more natural by eliminating judder effect.
Mode DVD and Blu-ray movies are filmed at 24 frames per second (fps). With LG Real Cinema,
every frame is consistently processed 5 times in 1/24 of a second producing 120 fps with
TruMotion or 2 times in 1/24 of a second producing 48 fps without TruMotion, thus totally
eliminating the judder effect.
This function can also work when TruMotion is off.
Color Gamut Plasma
Advanced Control, Expert Control
»»Maximizes the utilization of color to increase color quality.
»»Standard: Displays standard set of colors.
»»Wide: Increases number of colors used.
Photo mode
»»Wide: Increases number of colors used.
»»sRGB: Mode to display sRGB standard color gamut”
LCD Advanced Control
»»Maximizes the utilization of color to increase color quality.
»»Standard: Displays standard set of colors.
»»Wide: Increase number of colors used.
Expert Control
Displays color domain of the signal.
»»Standard: Displays standard set of colors.
»»Wide: Increase number of colors used.
»»EBU: Mode to display EBU standard color area.
»»SMPTE: Mode to display SMPTE standard color area.
»»BT709: Mode to display BT709 standard color area.
96 CUSTOMIZING SETTINGS
Setting Description
Edge Enhancer Shows clearer and distinctive yet natural edges of the video.
This function works well over Sharpness UI 60 value.
xvYCC This is produces richer colors.
This feature represents rich colors as much as a conventional video signal.
This function is enabled in “Picture mode - Cinema, Expert” when xvYCC signal is inputted
through HDMI.
Color Filter This is the function to filter the specific colors of the video.
You can use the RGB filter to set color saturation and hue accurately.
Expert Pattern This is the pattern used for expert adjustment
This function is enabled in “Picture Mode - Expert” when you watch DTV.
Color Temperature Adjusts the overall color of the screen by changing the white baseline.
Plasma
a. Method : 2 Points
yyPattern: Inner, Outer
yyRed/Green/Blue Contrast, Red/Green/Blue BrightnessThe adjustment range is -50
to +50.
b. Method : 20 Point IRE
yy IRE (Institute of Radio Engineers) is the unit to display the size of the video signal
and can be set among 0, 5, 10, 15 - 100 Plasma TV. You can adjust Red, Green or
Blue according to each setting.
yyRed/Green/Blue: The adjustment range is -50 - +50.
c. Apply to all inputs
LCD a. Gamma : Select 1.9, 2.2, 2.4
b. Method : 2 Points
yyPattern: Inner, Outer
yyRed/Green/Blue Contrast, Red/Green/Blue Brightness
ENGLISH
AUDIO Settings
1 Press Home to access the Home menu. AUDIO ꔂ Move ꔉ Enter Exit
2 Press the Navigation buttons to scroll to SETUP and press ENTER. • Auto Volume
• Clear Voice II
: Off
: Off ꕅ 2
3 Press the Navigation buttons to scroll to AUDIO and press ENTER. • Balance
• Sound Mode : Standard
0 L R
• Infinite 3D Surround:Off
4 Press the Navigation buttons to scroll to the setting or option you • Treble 50
want and press ENTER. • Bass 50
• Sound Reset
- To return to the previous level, press BACK. ? • Sound Optimizer : Normal
• Digital Audio Out : Auto
5 When you are finished, press EXIT. • TV Speaker : On
• ARC Mode : Off
• DTV Audio Setting : Auto
• AV Sync. : Off
ENGLISH
Sound Mode Selects one of the preset sound modes or customizes options in each mode.
ENG
Mode
Standard Select when you want standard-quality sound.
Music Select when you listen to music.
Cinema Select when you watch movies.
Sport Select when you watch sports events.
Game Select when you play games.
NOTE
yyIf sound quality or volume is not at the level you want, it is recommended to use a separate
home theater system or amplifier to cope with different user environments.
yyIf the Clear Voice II feature is on, Infinite 3D Surround will not be activated.
Option
Infinite 3D Patents LG proprietary sound processing technology that strives immersive 5.1
Surround surround sound with just two front speakers.
Treble Controls the dominant sounds in the output. When you turn up the treble, it will
increase the output to the higher frequency range.
Bass Controls the softer sounds in the output. When you turn up the bass, it will
increase the output to the lower frequency range.
Sound Reset Resets the sound mode to the default setting.
98 CUSTOMIZING SETTINGS
Setting Description
Sound Optimizes the sound depending on the environment in which the TV is installed.
Optimizer
Option
Normal Normal sound mode.
Wall Mount Type Optimized sound mode for a wall-mounted TV.
Stand Type Optimized sound mode for a stand-type TV.
Digital Audio This function is setting the Dolby digital/PCM to connect the audio outputs.
Out If you select “Digital Audio Out - Auto” when Dolby digital is available, SPDIF (Sony Philips Digital
InterFace) output will be Dolby Digital.
If you select “Digital Audio Out - PCM” when Dolby digital is not available, SPDIF output will be
PCM (Pulsecode modulation).
Even if both Dolby Digital and Audio language have been set in a channel which broadcast Dolby
Digital Audio, only Dolby Digital will be played.
Item Audio Input Digital Audio output
Auto MPEG PCM
Dolby Digital Dolby Digital
Dolby Digital Plus Dolby Digital
HE-AAC Dolby Digital
PCM All PCM
TV Speaker Turns on the internal speaker of the TV when using an external Hi-Fi system. You can use the TV
speaker as an audio output device even if there is no video input.
ARC Mode When using an external audio device with the ARC (Audio Return Channel) feature, SPDIF can be
(Audio Return output using only a High Speed HDMI cable without an additional optical cable.
Channel)
ENGLISH
NOTE
ENG
yySome HDMI cables may not support this mode. (A High Speed HDMI cable is recommended.)
yyThe ARC mode only works on the HDMI 1 input on the TV.
yyActivates the SIMPLINK feature to use this feature.
Option
On If the device with the ARC feature is turned on, the device speaker is
automatically used when SIMPLINK is enabled.
Off Even if the device with the ARC feature is turned on and SIMPLINK is enabled,
the device speaker is not automatically used.
DTV Audio When different audio types exist in an input signal, this function allows you to select the audio type
Setting (In digital you want.
mode)
Mode
Auto Automatically outputs in the order HE-AAC > Dolby Digital+ > Dolby Digital >
MPEG.
HE-AAC, Allows users to select the audio type they want.
Dolby Digital+, ex) If MPEG is selected, MPEG is always outputted.
Dolby Digital, If MPEG is not supported, another audio type is set in that order.
MPEG
AV Sync. If the video and sound are not synced, you can adjust it manually.
»»(-) setting : Make audio output faster than the default.
»»(+) setting : Make audio output slower than the default.
Option
AV Sync. Adjusts the sync of the TV speaker and SPDIF.
TV Speaker Adjusts the sync of the sound from the TV’s internal speaker.
SPDIF (Sony Adjusts the sync of the sound from an external speaker connected to the digital
Philips Digital audio output port.
InterFace)
CUSTOMIZING SETTINGS 99
TIME Settings
1 Press Home to access the Home menu. TIME ꔂ Move ꔉ Enter Exit
• Clock
2 Press the Navigation buttons to scroll to SETUP and press ENTER. • Off Time : Off
• On TIme : Off
3 Press the Navigation buttons to scroll to TIME and press ENTER. • Sleep Timer : Off
Off Time/On Time Sets the time to turn on or off the TV automatically. To use this function, you should set the current
time and date in advance.
NOTE
yyIf you do not press any button within 2 hours after the TV turns on by the On Time feature,
the TV enters the Standby mode automatically.
ENGLISH
yyIf you set both Off time and On time features to the same time, the Off time feature
ENG
overrides the On time feature.
Sleep Timer Sets the length of time until the TV to turns off. When you turn the TV off and turn it on again, the
Sleep timer feature will be set to off.
.
100 CUSTOMIZING SETTINGS
LOCK Settings
1 Press Home to access the Home menu. LOCK ꔂ Move ꔉ Enter Exit
2 Press the Navigation buttons to scroll to SETUP and press ENTER. • Set Password
• Lock System : On
3 Press the Navigation buttons to scroll to LOCK and press ENTER. • Block Channel
• Input Block
OPTION Settings
1 Press Home to access the Home menu. OPTION ꔂ Move ꔉ Enter Exit
2 Press the Navigation buttons to scroll to SETUP and press ENTER. • Language
• Caption : Off
3 Press the Navigation buttons to scroll to OPTION and press ENTER. • Hard of Hearing (ꔞ) : Off
• ISM Method : Normal
• Power Indicator
4 Press the Navigation buttons to scroll to the setting or option you • Pointer
want and press ENTER. • Smart Share Setting
• Factory Reset
- To return to the previous level, press BACK. ? • Set ID :1
• Mode Setting : Home Use
5 When you are finished, press EXIT. • IR Blaster : Off
ENGLISH
»yNA: Not Available
ENG
»y꘏: MPEG Audio
»yꔨ: Dolby Digital Audio
»yꔔ: Audio for “Visual Impaired”
»yꔬ: Audio for “Hearing Impaired”
»yꔩ: Dolby Digital Plus Audio
»yꔰ: HE-AAC Audio
Subtitle Use the Subtitle function when two or more subtitle languages are broadcast.
Language If subtitle data in a selected language is not broadcast, the default language
subtitle will be displayed.
yySubtitle Language OSD Information
»yNA: Not Available
»yꔬ: Subtitle for “Hard of Hearing”
NOTE
yyWhen the languages you selected as the primary for Audio Language and
Subtitle Language and Text Language are not supported, you can select
language in secondary category.
yyThe audio/subtitles can be displayed in a simpler form with 1 to 3
characters broadcast by the service provider.
yyWhen you select supplementary Audio (Audio for "Visual/Hearing
Impaired") the TV may output a part of the Main audio.
Caption Sets whether to display captions and customize your option in each mode.
(Depending on
model) Mode
CC 1-2 (Closed Displays the audio portion of a TV program as text on the TV screen. CC1 is the
Captioning) most common mode in use.
Text 1-2
Hard of Hearing This function if for the hearing impaired.
If it is set to on, the subtitle is displayed by default.
102 CUSTOMIZING SETTINGS
Setting Description
Power Indicator Sets to turn on or off the indicator light on the TV.
(Depending on
model) Option
Standby Light Set to turn on or off the indicator light in Standby mode.
Power Light Set to turn on or off the indicator light when you turn on the power.
ISM Method Prevents image sticking or removes a ghost image.
( )
Plasma
A frozen still picture displayed on the screen for prolonged periods can result in a ghost image.
Mode
Normal Sets it if image sticking is never a problem.
Orbiter Avoids a ghost image on the screen.
The image will move every 2 minutes to help prevent ghost images. However, it
is best not to allow any fixed image to remain on the screen.
Color Wash Removes a ghost image on the screen.
The color block with the screen moved a little and the white pattern are
alternately displayed. It is difficult to see the after image on all colors.
Once it has been corrected it will not be visible in any color.
White Wash Removes a ghost image on the screen.
Use sparingly. Watch the TV normally for a while before using this feature to see
if the ghost image disappears on its own.
NOTE
yyAn excessive ghosted image may be impossible to clear entirely with
White Wash. To return to normal viewing, press the any button.
ENGLISH
ENG
Pointer Sets the pointer option of the magic motion remote control.
(Depending on
model) Option
Speed Changes the pointer speed.
Shape Selects the pointer shape.
Size Changes the pointer size.
Alignment Align the remote control’s direction with the pointer on your TV screen by
shaking the remote control left and right. Then, the pointer automatically moves
to the center of the screen.
Smart Share Sets the DivX and DLNA option.
Setting
Option
DivX® VOD Registers your TV to play DivX protected videos (See p.65).
Registration
DivX® VOD Deregisters your TV (See p.65).
Deregistration
DMR Activates or deactivates the DMR (Digital Media Render) connection.
CUSTOMIZING SETTINGS 103
Setting Description
Factory Reset Resets the TV to factory default and erases all stored channels.
Customizes the TV settings to suit your preference. The initial setup screen will appear when you
turn on the TV for the first time.
NOTE
yyWhen selecting “Lock System - On”in the LOCK menu, the message to enter the password
appears.
yyIf you forget your password, press “0-3-2-5” on the remote control.
Setting
Language Selects a desired language.
Mode Setting Selects Home Use for the home environment.
Selects Store Demo for the retail environment.
Selects Demo Mode to set to show special features of the TV. You can cancel
the demo mode by pressing any buttons except the Volume and Mute buttons.
NOTE
yyWhen selecting Store Demo, Demo Mode will be activated.
ENGLISH
ENG
Auto Tuning Scans and saves available channels automatically.
Set ID Adds an ID to the connected devices.
Mode Setting Default selection is “Home Use”. We recommend setting the TV to “Home Use” mode for the best
picture in your home environment.
Option
Home Use Selects it for the home environment.
Store Demo Selects it for the retail environment.
Demo Mode Sets to show special features of the TV. You can cancel the demo mode by
pressing any buttons except the Volume and Mute buttons.
IR Blaster Adjusts when connecting Wireless media box (sold seperate).
(Depending on For futher information, refer to the optional "Wireless media box" manual for operating insturctions.
model)
104 CUSTOMIZING SETTINGS
NETWORK Settings
1 Press Home to access the Home menu. NETWORK ꔂ Move ꔉ Enter Exit
2 Press the Navigation buttons to scroll to SETUP and press ENTER. • Network Setting
• Network Status
: Wired
: Internet is connected
• Smart TV Setting
3 Press the Navigation buttons to scroll to NETWORK and press • Legal Notice
ENTER.
Weather Effect Sets the region for the weather to be displayed on the background of the
premium service.
Select your region.
Premium Version Display the version of the premium service.
ID Management Manage the login history of the IDs added to the TV.
Reset Delete all IDs added on the TV.
Legal Notice Display the Legal notice.
CUSTOMIZING SETTINGS 105
SUPPORT Settings
1 Press Home to access the Home menu. ? SUPPORT ꔂ Move ꔉ Enter Exit
2 Press the Navigation buttons to scroll to SETUP and press ENTER. • Software Update
• Picture Test
• Sound Test
3 Press the Navigation buttons to scroll to SUPPORT and press • Signal Test
ENTER. • Product/Service Info.
• Initialization of Premium
ENGLISH
ENG
Product/Service Shows the product or service information.
Info. Customer Service Center can differ by country.
Initialization of Initialize the premium menu if an error occurs while updating the premium menu.
Premium Then, the TV automatically switches off and then back on.
106 MAKING CONNECTIONS
MAKING CONNECTIONS
Connect various external devices to the TV and switch input modes to select an external device. For more
information on external device’s connection, refer to the manual provided with each device.
Available external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC,
gaming devices, and other external devices.
NOTE
If you record a TV program on a DVD recorder or VCR, make sure to connect the TV signal input cable
yy
to the TV through a DVD recorder or VCR. For more information on recording, refer to the manual
provided with the connected device.
The external device connection may differ from the model.
yy
Connect external devices to the TV regardless of the order of the TV port.
yy
ENGLISH
ENG
MAKING CONNECTIONS 107
Connection Overview
Connect various external devices to the ports on the TV back panel.
1 Find an external device you want to connect to your TV as shown on the following illustration.
2 Check the connection type of the external device.
3 Go to the appropriate illustration and check the connection details.
Speaker
USB
ENGLISH
ENG
HDMI – See p.108, p.112
DVI – See p.109, p.113
Component –See p.110
Composite –See p.111
PC RGB – See p.114 Gaming Device
Memory storage – See p.116
Memory card reader –See p.116
Digital – See p.115
NOTE
If you connect a gaming device to the TV, use the cable supplied with the gaming device.
yy
Refer to the external equipment’s manual for operating instructions.
yy
108 MAKING CONNECTIONS
Connecting to a HD receiver,
DVD, or VCR player
H/P
Connect a HD receiver, DVD, or VCR player to the LV3700 series
TV and select an appropriate input mode.
USB Apps
USB IN
HDMI Connection
/DVI
IN 3
Transmits the digital video and audio signals from LAN AUDIO IN (RGB/DVI)
COMPONENT
/DVI
IN
OPTICAL DIGITAL RGB IN (PC)
IN 2
Y
device and the TV with the HDMI cable as shown
PB
/DVI
VIDEO
IN 1 (ARC)
AUDIO OUT RS-232C IN (CONTROL&SERVICE)
PR
VIDEO
L/MONO AUDIO R
AV IN
AUDIO
L
ANTENNA
TEN CABLE
AB
IN IN
NOTE
R
2 1
USB IN 1
Plasma
/DVI
COMPONENT
IN1
WIRELESS
IN 4
ENGLISH
Machine
Ready
CONTROL
ꔡ
Machin
me
Time
Y
ENG
/DVI
VIDEO
IN 3
PB
AV IN1
4
VIDEO
PR
/DVI
RS-232C IN (CONTROL&SERVICE)
IN 2
L/MONO AUDIO R
3
L
AUDIO
OPTICAL
/DVI
AUDIO IN DIGITAL
IN 1 (ARC)
(RGB/DVI) AUDIO OUT
RS-232C IN
R
2
AUDIO / VIDEO
LAN RGB IN (PC) AUDIO IN OPTICAL
PTICAL
TICAL DIGIT
DIGITAL ANTENNA
TEN
EN CABLE
ABL COMPONENT IN 2 H/P
(RGB/DVI) AUDIO OUT IN IN AUDIO / Y PB PR
LAN VIDEO L/MONO AUDIO R
AV IN1
/DVI IN
2 AV IN2
COMPON ENT IN
L/MONO AUDIO R
Y PB PR L R
1
VIDEO AUDIO ANTENNA IN CABLE IN
VIDEO
HDMI
HDMI
MAKING CONNECTIONS 109
USB IN 1
following illustration. To transmit an audio signal,
/DVI
connect an audio cable.
COMPONENT
IN1
WIRELESS
IN 4
CONTROL
ꔡ
Y
USB IN 1 USB IN 2/USB Apps
/DVI
VIDEO
IN 3
PB
AV IN1
VIDEO
PR
/DVI
RS-232C IN (CONTROL&SERVICE)
IN 2
Plasma
L/MONO AUDIO R
L
Machine
Ready
Machin
AUDIO
me
Time
/DVI
IN 1 (ARC)
R
AV IN 2
4
AUDIO / VIDEO
LAN RGB IN (PC) AUDIO IN OPTICAL
PTICAL
TICAL DIGIT
DIGITAL ANTENNA
TEN
EN CABLE
ABL COMPONENT IN 2 H/P
(RGB/DVI) AUDIO OUT IN IN AUDIO / Y PB PR
3
OPTICAL
AUDIO IN DIGITAL
(RGB/DVI) AUDIO OUT
RS-232C IN
2
/DVI IN
2 AV IN2
COMPON ENT IN
L/MONO AUDIO R
Y PB PR L R
1
VIDEO AUDIO ANTENNA IN CABLE IN
VIDEO
DVI OUT
ENGLISH
ENG
AUDIO OUT
H/P
LV3700 series
USB Apps
USB IN
/DVI
IN 3
IN
OPTICAL DIGITAL RGB IN (PC)
IN 2
Y
PB
/DVI
VIDEO
IN 1 (ARC)
VIDEO
L/MONO AUDIO R
AV IN
AUDIO
ANTENNA
TEN CABLE
AB
IN IN
R
2 1
DVI OUT
AUDIO OUT
110 MAKING CONNECTIONS
Component Connection
Transmits the analog video and audio signals from
an external device to the TV. Connect the external
USB IN 2
device and the TV with the component cable as
shown in the following illustration.
USB IN 1
/DVI
COMPONENT
IN1
WIRELESS
IN 4
NOTE CONTROL
ꔡ
/DVI
VIDEO
If cables are installed incorrectly, it could
yy
IN 3
PB
AV IN1
VIDEO
PR
/DVI
RS-232C IN (CONTROL&SERVICE)
IN 2
L/MONO AUDIO R
or with distorted color. Check to ensure the
L
AUDIO
USB IN/DVI
IN 1 (ARC)
Time Machine Ready USB Apps
2
cable are matched with the corresponding
R
color connection.
AV IN 2
USB IN 1
LAN RGB IN (PC) (RGB/DVI) AUDIO OUT IN IN
COMPONENT IN 2
AUDIO / Y PB PR
H/P
/DVI
COMPONENT
IN1
WIRELESS
IN 4
CONTROL
ꔡ
Y
Machine
Ready
Machin
me
Time
/DVI
VIDEO
IN 3
PB
Plasma AV IN1
AUDIO VIDEO
VIDEO
PR
/DVI
4
RS-232C IN (CONTROL&SERVICE)
IN 2
L/MONO AUDIO R
L
AUDIO
3
/DVI
IN 1 (ARC)
OPTICAL
R
AUDIO IN DIGITAL
(RGB/DVI) AUDIO OUT
RS-232C IN
2
/DVI IN
2 AV IN2
COMPON ENT IN
L/MONO AUDIO R
ENGLISH
Y PB PR L R
1
ENG
VIDEO AUDIO
H/P
AUDIO VIDEO
USB Apps
LV3700 series
USB IN
/DVI
IN 3
IN
OPTICAL DIGITAL RGB IN (PC)
IN 2
Y
PB
/DVI
VIDEO
IN 1 (ARC)
VIDEO
L/MONO AUDIO R
AV IN
AUDIO
ANTENNA
TEN CABLE
AB
IN IN
R
2 1
AUDIO VIDEO
MAKING CONNECTIONS 111
Composite Connection
Transmits the analog video and audio signals from
an external device to the TV. Connect the external
USB IN 1
shown in the following illustration.
/DVI
COMPONENT
IN1
WIRELESS
IN 4
CONTROL
ꔡ
NOTE
/DVI
VIDEO
IN 3
PB
AV IN1
If you have a mono VCR, connect the audio
yy
VIDEO
PR
/DVI
cable from the VCR to the AUDIO L/MONO
RS-232C IN (CONTROL&SERVICE)
IN 2
L/MONO AUDIO R
L
jack of the TV.
AUDIO
USB IN 1 USB IN 2/USB Apps
/DVI
IN 1 (ARC)
R
AV IN 2
AUDIO / VIDEO
LAN RGB IN (PC) AUDIO IN OPTICAL
PTICAL
TICAL DIGIT
DIGITAL ANTENNA
TEN
EN CABLE
ABL COMPONENT IN 2 H/P
(RGB/DVI) AUDIO OUT IN IN AUDIO / Y PB PR
Machine
Plasma
Ready
Machin
me
Time
USB IN 1
3
OPTICAL
/DVI
VIDEO L (MONO) AUDIO R COMPONENT
AUDIO IN DIGITAL IN1
WIRELESS
IN 4
(RGB/DVI) AUDIO OUT
CONTROL
RS-232C IN
ꔡ
2
Y
WIRELESS
CONTROL
/DVI
VIDEO
1 (ARC)
IN 3
PB
AV IN1
LAN VIDEO L/MONO AUDIO R
AV IN1
VIDEO
PR
/DVI
/DVI IN
RS-232C IN (CONTROL&SERVICE)
IN 2
L/MONO AUDIO R
2 AV IN2
COMPON ENT IN
L
L/MONO AUDIO R
AUDIO
Y PB PR L R
/DVI
IN 1 (ARC)
1
R
AV IN 2
VIDEO
ENGLISH
AUDIO / VIDEO
LAN RGB IN (PC) AUDIO IN OPTICAL
PTICAL
TICAL DIGIT
DIGITAL ANTENNA
TEN
EN CABLE
ABL COMPONENT IN
N2 H/P
(RGB/DVI) AUDIO OUT IN IN AUDIO / Y PB PR
ENG
VIDEO L (MONO) AUDIO R
H/P
USB Apps
LV3700 series
USB IN
/DVI
IN 3
IN
OPTICAL DIGITAL RGB IN (PC)
IN 2
Y
/DVI
VIDEO
IN 1 (ARC)
VIDEO
L/MONO AUDIO R
AV IN
AUDIO
ANTENNA
TEN CABLE
AB
IN IN
R
2 1
Connecting to a PC
NOTE
It is recommended to use the TV set with
yy Other models
USB IN 1
/DVI
COMPONENT
IN1
WIRELESS
IN 4
CONTROL
ꔡ
HDMI Connection
/DVI
VIDEO
IN 3
PB
AV IN1
VIDEO
Transmits the digital video and audio signals
PR
/DVI
RS-232C IN (CONTROL&SERVICE)
IN 2
L/MONO AUDIO R
from your PC to the TV. Connect the PC and the
L
AUDIO
/DVI
IN 1 (ARC)
TVwith the HDMI cable as shown in the following
R
illustrations.
AV IN 2
AUDIO / VIDEO
LAN RGB IN (PC) AUDIO IN OPTICAL
PTICAL
TICAL DIGIT
DIGITAL ANTENNA
TEN
EN CABLE
ABL COMPONENT IN 2 H/P
USB IN 1 USB IN 2/USB Apps (RGB/DVI) AUDIO OUT IN IN AUDIO / Y PB PR
Plasma
Machine
Ready
Machin
me
Time
HDMI
4
3
OPTICAL
AUDIO IN DIGITAL
(RGB/DVI) AUDIO OUT
RS-232C IN
2
LAN
ENGLISH
/DVI IN
ENG
2 AV IN2
COMPON ENT IN
L/MONO AUDIO R
Y PB PR L R
1
VIDEO AUDIO ANTENNA IN CABLE IN
VIDEO
HDMI
H/P
LV3700 series
USB Apps
USB IN
/DVI
IN 3
IN
OPTICAL DIGITAL RGB IN (PC)
IN 2
Y
PB
/DVI
VIDEO
IN 1 (ARC)
VIDEO
L/MONO AUDIO R
AV IN
AUDIO
ANTENNA
TEN CABLE
AB
IN IN
R
2 1
HDMI
MAKING CONNECTIONS 113
USB IN 1
cable.
/DVI
COMPONENT
IN1
IN 4
CONTROL
ꔡ
/DVI
VIDEO
IN 3
PB
AV IN1
Plasma
VIDEO
PR
/DVI
RS-232C IN (CONTROL&SERVICE)
Machine
Ready
IN 2
Machin
me
Time
L/MONO AUDIO R
L
AUDIO
/DVI
IN 1 (ARC)
R
4 AV IN 2
AUDIO / VIDEO
LAN RGB IN (PC) AUDIO IN OPTICAL
PTICAL
TICAL DIGIT
DIGITAL ANTENNA
TEN
EN CABLE
ABL COMPONENT IN 2 H/P
(RGB/DVI) AUDIO OUT IN IN AUDIO / Y PB PR
3
OPTICAL
AUDIO IN DIGITAL
(RGB/DVI) AUDIO OUT
RS-232C IN
2
DVI OUT
LAN VIDEO L/MONO AUDIO R
AV IN1
/DVI IN
AUDIO OUT
2 AV IN2
COMPON ENT IN
L/MONO AUDIO R
Y PB PR L R
1
VIDEO AUDIO ANTENNA IN CABLE IN
VIDEO
DVI OUT
ENGLISH
ENG
AUDIO OUT
H/P
LV3700 series
USB Apps
USB IN
/DVI
IN 3
IN
OPTICAL DIGITAL RGB IN (PC)
IN 2
Y
PB
/DVI
VIDEO
IN 1 (ARC)
VIDEO
L/MONO AUDIO R
AV IN
AUDIO
ANTENNA
TEN CABLE
AB
IN IN
R
2 1
DVI OUT
AUDIO OUT
114 MAKING CONNECTIONS
RGB Connection
Transmits the analog video signal from your PC to NOTE
the TV. Connect the PC and the TV with the D-sub
1920X1080 is the recommended PC
yy
15 pin signal cable as shown in the following
resolution. If you use the TV in other video
Machine
Ready
Machin
Time
me
Plasma
may not work if a HDMI to DVI Cable is in
use.
4
In PC mode, there may be noise associated
yy
3
OPTICAL
AUDIO IN
(RGB/DVI)
DIGITAL
AUDIO OUT
RS-232C IN
with the resolution, vertical pattern, contrast
2
WIRELESS RGB IN (PC) (CONTROL&SERVICE)
CONTROL
or brightness. If noise is present, change
1 (ARC)
LAN VIDEO L/MONO AUDIO R
the PC output to another resolution, change
AV IN1
/DVI IN
L/MONO AUDIO R
USB Apps
IN
OPTICAL DIGITAL RGB IN (PC)
IN 2
Y
PB
/DVI
VIDEO
IN 1 (ARC)
VIDEO
L/MONO AUDIO R
AV IN
AUDIO
ANTENNA
TEN CABLE
AB
IN IN
R
2 1
Time Machine Ready USB Apps
USB IN 2
COMPONENT
IN1
WIRELESS
IN 4
CONTROL
ꔡ
Y
Other models
/DVI
VIDEO
IN 3
PB
AV IN1
VIDEO
PR
/DVI
RS-232C IN (CONTROL&SERVICE)
IN 2
L/MONO AUDIO R
L
AUDIO
/DVI
IN 1 (ARC)
R
AV IN 2
AUDIO / VIDEO
LAN RGB IN (PC) AUDIO IN OPTICAL
PTICAL
TICAL DIGIT
DIGITAL ANTENNA
TEN
EN CABLE
ABL COMPONENT IN 2 H/P
(RGB/DVI) AUDIO OUT IN IN AUDIO / Y PB PR
Connecting to an Audio
H/P
System
USB Apps
LV3700 series
USB IN
Use an optional external audio system instead of
the built-in speaker.
/DVI
IN 3
NOTE
LAN AUDIO IN (RGB/DVI)
COMPONENT
/DVI
IN
OPTICAL DIGITAL RGB IN (PC)
IN 2
Y
If you use an optional external audio device
yy
PB
/DVI
VIDEO
instead of the built-in speaker, set the TV
IN 1 (ARC)
AUDIO OUT RS-232C IN (CONTROL&SERVICE)
PR
VIDEO
speaker feature to off (See p.98).
L/MONO AUDIO R
AV IN
AUDIO
L
ANTENNA
TEN CABLE
AB
IN IN
R
2 1
USB IN 1
NOTE
/DVI
COMPONENT
IN1
WIRELESS
IN 4
Do not look into the optical output port.
yy Other models
Y CONTROL
ꔡ
/DVI
Looking at the laser beam may damage your
VIDEO
IN 3
PB
AV IN1
vision. VIDEO
PR
/DVI
RS-232C IN (CONTROL&SERVICE)
IN 2
Audio with ACP (Audio Copy Protection)
ENGLISH
L/MONO AUDIO R
yy
L
USB IN 1 USB IN 2/USB Apps
AUDIO
ENG
/DVI
IN 1 (ARC)
function may block digital audio output.
R
AV IN 2
AUDIO / VIDEO
LAN RGB IN (PC) AUDIO IN OPTICAL
TICAL DIGITAL
PTICAL DIGIT ANTENNA
TEN
EN CABLE
ABL COMPONENT IN 2 H/P
(RGB/DVI) AUDIO OUT IN IN AUDIO / Y PB PR
Machine
Ready
Machin
me
Time
Plasma
4
3
OPTICAL
AUDIO IN DIGITAL
(RGB/DVI) AUDIO OUT
RS-232C IN
2
/DVI IN
2 AV IN2
COMPON ENT IN
OPTICAL AUDIO IN
L/MONO AUDIO R
Y PB PR L R
1
VIDEO AUDIO ANTENNA IN CABLE IN
VIDEO
OPTICAL AUDIO IN
116 MAKING CONNECTIONS
USB IN 1
Listen to the sound through a headphone.
memory card reader to the TV and access the
Smart Share menu to use various multimedia files.
/DVI
COMPONENT
IN1
WIRELESS
IN 4
See "Connecting USB storage devices" on page CONTROL
56
ꔡ
i.e)
Y
and see "Browsing files" on page 61.
/DVI
VIDEO
IN 3
PB
AV IN1
VIDEO
PR
/DVI
RS-232C IN (CONTROL&SERVICE)
i.e)
IN 2
L/MONO AUDIO R
L
AUDIO
/DVI
IN 1 (ARC)
R
Time Machine Ready USB Apps
USB IN 2
AV IN 2
AUDIO / VIDEO
LAN RGB IN (PC) AUDIO IN OPTICAL
PTICAL
TICAL DIGIT
DIGITAL ANTENNA
TEN
EN CABLE
ABL COMPONENT IN 2 H/P
(RGB/DVI) AUDIO OUT IN IN AUDIO / Y PB PR
USB IN 1
/DVI
IN 4
/DVI
NOTE
IN 3
connecting a headphone.
IN 2
/DVI
IN 1 (ARC)
ENG
USB IN 1
(included with the media box) to the TV, external
/DVI
COMPONENT
IN 4
CONTROL
ꔡ
Y
Media Box and video and audio will be sent to the
/DVI
VIDEO
IN 3
PB
AV IN1
TV wirelessly.
VIDEO
PR
/DVI
RS-232C IN (CONTROL&SERVICE)
Refer to the Wireless Media Box manual for
IN 2
L/MONO AUDIO R
L
operating instructions.
AUDIO
/DVI
IN 1 (ARC)
R
AV IN 2
AUDIO / VIDEO
LAN RGB IN (PC) AUDIO IN OPTICAL
PTICAL
TICAL DIGIT
DIGITAL ANTENNA
TEN CABLE
ABL COMPONENT IN 2 H/P
(RGB/DVI) AUDIO OUT IN IN AUDIO / Y PB PR
NOTE
When using the external device connected
yy
to the Wireless Media Box, some functions
of the TV menu may not work. WIRELESS
CONTROL HDMI OUT
Plasma
ENGLISH
USB IN 1 USB IN 2/USB Apps
ENG
Machine
Ready
Machin
me
Time
4
3
OPTICAL
AUDIO IN DIGITAL
(RGB/DVI) AUDIO OUT
RS-232C IN
2
/DVI IN
2 AV IN2
COMPON ENT IN
L/MONO AUDIO R
Y PB PR L R
1
VIDEO AUDIO ANTENNA IN CABLE IN
VIDEO
WIRELESS
CONTROL HDMI OUT
118 MAKING CONNECTIONS
NOTE
If you change the input source by pressing
yy
◀◀ On
On ▶▶
INPUT, the progressing function of the
SIMPLINK device will stop.
Watch TV 1 If you select a device that has the
yy
DISC 2 home theater feature, the sound output
VCR
automatically switches to the home theater
3 speaker and the TV speaker turns off.
HDD Recorder 4 If a connected SIMPLINK home theater
yy
Speaker
5 system does not play the audio from the TV,
connect the DIGITAL AUDIO OUT terminal
� INPUT EXIT on the rear of the TV to the DIGITAL AUDIO
IN terminal on the back of the SIMPLINK
device with an optical cable.
MAINTENANCE 119
ENGLISH
2 Press the Navigation buttons to scroll to software is being updated through NSU.
ENG
SETUP and press ENTER. You can check the software update status
yy
in the Software Update menu or from the
3 Press the Navigation buttons to scroll to
update information displayed under the
SUPPORT and press ENTER.
channel banner.
4 Press the Navigation buttons to scroll to
Software Update and press ENTER.
The current firmware version displays. 6 When the update is complete, the TV will
automatically restart in 5 seconds.
5 Select Check Update Version to check a new
You may need to reset some SETUP,
firmware version manually.
PICTURE, or AUDIO menus.
Software Update ◀ On ▶
• Current Version
NOTE
01.00.09 You cannot downgrade back to an older
yy
Check Update Version firmware version.
The period of time for the firmware update
yy
Close may be different depending on the firmware
size or network condition.
If the firmware update download fails when
yy
When software update is on, the TV will
using wireless, temporarily connect a cable
automatically check for software updates
directly to your router. If it still does not
through the NSU/OTA*.
download, contact customer service.
A pop-up window will appear on the screen
when an update is available.
120 MAINTENANCE
CAUTION
Do not spray liquid onto the surface. If water
yy
enters the TV, it may result in fire, electric
shock, or malfunction.
Do not use any chemicals as this may
yy
deteriorate the surface.
TROUBLESHOOTING 121
TROUBLESHOOTING
General
Problem Resolution
Cannot control the TV with the yyCheck the remote control sensor on the product and try again.
remote control. yyCheck if there is any obstacle between the product and the remote control.
yyCheck if the batteries are still working and properly installed ( to , to ).
yyCheck if the appropriate input mode such as TV or VCR is set for using the
remote control.
No image display and no sound is yyCheck if the product is turned on.
produced. yyCheck if the power cord is connected to a wall outlet.
yyCheck if there is a problem in the wall outlet by connecting other products.
Image appears slowly when the TV yyThe image is muted during the product startup process. This is normal. If the
turns on. image does not appear in a few minutes, unplug the TV for 30 seconds and try
again. If the image still does not appear, contact the authorized service center
in your local area.
Cannot connect external devices. yyRefer to the “Connection overview” and connect an external device.
The TV turns off suddenly. yyCheck the power control settings. The power supply may be interrupted.
yyCheck if the Auto sleep feature is activated in the Time settings.
Refer to the “Sleep Timer”.
yyIf there is no signal while the TV is on, the TV will turn off automatically after
15 minutes of inactivity.
ENGLISH
ENG
Audio
Problem Resolution
No sound is produced while images yyPress VOL + or - button.
are displaying. yyCheck if the sound is muted by pressing MUTE.
yyScroll to other channels. There may a problem with the broadcast.
yyCheck if the audio cables are connected properly.
yyCheck if the TV Speaker feature is activated in the menu option.
No output from one of the speakers yyAdjust Balance in the menu option.
Unusual sound from inside the TV is yyA change in ambient humidity or temperature may result in an unusual noise
produced. when the product turns on or off. There is no problem with your product.
122 TROUBLESHOOTING
Video
Problem Resolution
An image displays in black and yyAdjust the color setting in the menu option.
white or the color quality is poor. yyKeep a sufficient distance between this product and other electronic products.
yyScroll to other channels. There may a problem with the broadcast.
Horizontal or vertical bars appears yyCheck if there are local interferences such as an electrical appliance or power
or images blur tool.
Lines or streaks appear on images yyCheck the antenna or aim the antenna to the proper direction.
Afterimages (ghosts) appear when yyPixels may have been damaged from a fixed image displayed for a long time
the product turns off (image burn). Use a screen saver to prevent the pixel damage on the screen.
The power is on but the screen yyAdjust the brightness and contrast in the menu option.
appears extremely dark.
“No Signal” appears on the screen. yyCheck if the signal cable is connected between the TV and products properly.
yyCheck the selected input source by pressing INPUT.
Black spots appear on the screen. yySeveral pixels in red, green, white, or black may appear on the screen that can
attribute to the characteristics of the panel.
This is normal.
The display offset is wrong. yyAdjust the position setting in the menu option.
yyCheck if the video card resolution and frequency are supported by the product.
If the frequency is out of range, set to the recommended resolution using the
display settings on the external device.
Thin lines appear in the background yyCheck the video cable connections.
of the screen.
Horizontal noises appear or yyAdjust the Phase setting in the menu option.
ENGLISH
The reception on some channels is yyScroll to other channels. There may a problem with the broadcast.
poor yyThe station signal may be weak. Aim the antenna to the proper direction.
yyCheck if there is local interference such as an electrical appliance or power
tool.
Movie
Problem Resolution
The file does not appear on the yyCheck whether the extension is supported.
Movie List.
Message is displayed yyCheck whether the file is playing normally on a PC. (Check whether the file is
saying “This file is invalid” or the damaged.)
audio is working normally but the yyCheck whether the resolution is supported.
video is not working normally. yyCheck whether the video/audio codec is supported.
yyCheck whether the frame rate is supported.
Message is displayed saying yyCheck whether the file is playing normally on a PC. (Check whether the file is
“Unsupported Audio” or the video damaged.)
is working normally but the audio is yyCheck whether the audio codec is supported.
not working normally. yyCheck whether the bit rate is supported.
yyCheck whether the sample rate is supported.
Subtitle is not working. yyCheck whether the file is playing normally on a PC. (Check whether the file is
damaged.)
yyCheck whether the video file and subtitle file name are the same.
yyCheck whether the video file and subtitle file are located in the same folder.
yyCheck whether the subtitle file is supported.
yyCheck whether the language is supported. (When you open the subtitle file in
Memo Pad, you can check the language of the subtitle file.)
SPECIFICATIONS 123
SPECIFICATIONS
Product specifications may be changed without prior notice due to upgrade of product functions.
50PZ950E 60PZ950E
MODELS
(50PZ950E-DA) (60PZ950E-DA)
ENGLISH
ENG
Dimensions With stand 1175.2 mm x 787.6 mm x 317.2 mm 1393.4 mm x 916.4 mm x 364.4 mm
(W x H x D)
Without stand 1175.2 mm x 720.6 mm x 49.6 mm 1393.4 mm x 843.8 mm x 49.6 mm
Weight With stand 32.5 kg 46.3 kg
Without stand 28.9 kg 40.3 kg
Current Value / Power consumption 3.7 A / 370 W 5.3 A / 530 W
124 SPECIFICATIONS
32LV5500 42LV5500
MODELS
(32LV5500-DD) (42LV5500-DD)
Dimensions With stand 776.0 mm x 549.0 mm x 240.0 mm 1012.0 mm x 683.0 mm x 256.0 mm
(W x H x D)
Without stand 776.0 mm x 485.0 mm x 34.9 mm 1012.0 mm x 617.0 mm x 29.9 mm
Weight With stand 10.8 kg 15.5 kg
Without stand 8.8 kg 13.2 kg
Current Value / Power consumption 1.2A / 120W 1.4 A / 140 W
47LV5500 55LV5500
MODELS
(47LV5500-DD) (55LV5500-DD)
ENGLISH
(W x H x D)
Without stand 1121.0 mm x 678.0 mm x 29.9 mm 1298.0 mm x 778.0 mm x 29.9 mm
Weight With stand 20.7 kg 25.8 kg
Without stand 18.4 kg 21.7 kg
Current Value / Power consumption 1.5 A / 150 W 1.7 A / 170 W
32LW5700 42LW5700
MODELS
(32LW5700-DA) (42LW5700-DA)
Dimensions With stand 766.0 mm x 545.0 mm x 240.0 mm 999.0 mm x 681.0 mm x 255.0 mm
(W x H x D)
Without stand 766.0 mm x 491.0 mm x 41.0 mm 999.0 mm x 623.0 mm x 30.9 mm
Weight With stand 10.7 kg 15.7 kg
Without stand 8.9 kg 13.4 kg
Current Value / Power consumption 1.2A / 120 W 1.4 A / 140 W
47LW5700 55LW5700
MODELS
(47LW5700-DA) (55LW5700-DA)
Dimensions With stand 1109.0 mm x 744.0 mm x 255.0 mm 1286.0 mm x 848.0 mm x 338.0 mm
(W x H x D)
Without stand 1109.0 mm x 684.0 mm x 30.9 mm 1286.0 mm x 784.0 mm x 30.9 mm
Weight With stand 20.2 kg 26.2 kg
Without stand 17.9 kg 22.1 kg
Current Value / Power consumption 1.5 A / 150 W 1.7 A / 170 W
SPECIFICATIONS 125
47LW6500 55LW6500
MODELS
(47LW6500-DA) (55LW6500-DA)
Dimensions With stand 1119.0 mm x 749.0 mm x 255.0 mm 1297.0 mm x 851.0 mm x 341.0 mm
(W x H x D)
Without stand 1119.0 mm x 684.0 mm x 29.9 mm 1297.0 mm x 785.0 mm x 29.9 mm
Weight With stand 21.0 kg 27.0 kg
Without stand 18.2 kg 22.0 kg
Current Value / Power consumption 1.5 A / 150 W 1.7 A / 170W
47LW9800 55LW9800
MODELS
(47LW9800-DA) (55LW9800-DA)
Dimensions With stand 1095.0 mm x 735.0 mm x 235.0 mm 1265.0 mm x 831.0 mm x 285.0 mm
(W x H x D)
Without stand 1095.0 mm x 665.0 mm x 27.9 mm 1265.0 mm x 760.0 mm x 27.9 mm
Weight With stand 22.5 kg 29.0 kg
Without stand 18.2 kg 23.8 kg
Current Value / Power consumption 2.1 A / 210 W 2.7 A / 270 W
ENGLISH
ENG
126 SPECIFICATIONS
37.50 50.00
ENG
67.432 59.94
1280x720p 44.96 59.94 67.500 60.00
45.00 60.00
28.125 50.00
1920x1080i 33.72 59.94 Component port connecting information
33.75 60.00
Component ports on the
Y PB PR
26.97 23.976 TV
27.00 24.00
33.71 29.97 Y PB PR
1920x1080p 33.75 30.00 Video output ports Y B-Y R-Y
56.25 50.00 on DVD player Y Cb Cr
67.432 59.94 Y Pb Pr
67.50 60.00
SPECIFICATIONS 127
File Audio/
Codec Profile/Level Support Explanation
Extensions Video
Advanced Profile@Level 3
VC-1 Advanced Profile
(e.g. 720p60, 1080i60, 1080p30)
Only streams compliant to
Video Simple Profile@Medium Level (e.g. CIF, SMPTE 421M VC-1 standard
.asf VC-1 Simple and Main are supported.
QVGA)
.wmv Profiles
Main Profile@High Level (e.g. 1080p30)
WMA Standard
Audio
WMA 9 Professional
DivX3.11
DivX4 Global motion compensation
DivX5 Advanced Simple Profile or quarterpel motion
DivX6 (e.g. 720p/1080i) estimation does not
Video
XViD supported. Streams
.divx using this syntax are not
Main Profile@ Level 4.1 supported.
.avi H.264 / AVC High Profile@ Level 4.1
(e.g. 720p60, 1080i60, 1080p30)
MPEG-1 Layer I, II
Audio MPEG-1 Layer III (MP3)
Dolby Digital
ENGLISH
Video estimation does not
.m4v
ENG
Advanced Simple Profile (e.g. supported. Streams
.mov MPEG-4 Part 2
720p/1080i) using this syntax are not
Audio AAC AAC-LC and HE-AAC supported.
3D supported formats
Horizontal Vertical
Input Signal Resolution Frequency Frequency Playable 3D video format
(kHz) (Hz)
90 60
89.9 59.94 »»HDMI 3D Frame Packing
75 50
720p 1280x720
»»Side by Side
45.00 60 »»Top & Bottom
»»HDMI 3D Side by Side (Half)
37.5 50 »»HDMI 3D Top & Bottom
33.75 60 »»Side by Side
»»Top & Bottom
1080i
»»HDMI 3D Side by Side (Half)
28.125 50
»»HDMI 3D Top & Bottom
HDMI 67.50 60 »»Side by Side
»»Top & Bottom
»»Checker Board
56.250 50 »»Single Frame Sequential
»»HDMI 3D Side by Side (Half)
1920x1080 »»HDMI 3D Top & Bottom
»»Side by Side
DTV 720p, 1080i
»»Top & Bottom
Media contents and a player need to support HDMI 3D Frame Packing, HDMI 3D Side by Side, HDMI 3D
yy
Top & Bottom to play in 3D.
Video, which is input as HDMI 3D Frame Packing, HDMI 3D Side by Side, HDMI 3D Top & Bottom
yy
format, is switched into the 3D screen automatically.
SPECIFICATIONS 129
Because band channel used by the country could be different, the user can not change or adjust the
operating frequency and this product is set for the regional frequency table.
yyFCC ID of Wi-Fi module inside TV
FCC ID: BEJWN8522D1
ENGLISH
ENG
RF module (BM-LDS201) specification
For TV By using a 2.4 GHz bandwidth radio frequency (RF).
yyOutput: 1 dBm or lower
yyMaximum Communication Distance: 10 m (30 ft) in an open space
yyBandwidth: 2.4 GHz (2.4035 GHz - 2.4783 GHz)
yyTransfer Rate: 250 kbps
yyFCC ID of RF module inside TV
FCC ID: BEJLDS201
130 IR CODES
IR CODES
Code Code
Function Note Function Note
(Hexa) (Hexa)
08 POWER Remote control Button F0 TV/RAD Remote control Button
(Power On/Off)
DC 3D Remote control Button
45 Q.MENU Remote control Button 5B EXIT Remote control Button
43 Home Remote control Button D6 TV Discrete IR Code
(TV Input Selection)
0B INPUT Remote control Button
10 - 19 Number Key 0-9 Remote control Button C4 POWER ON Discrete IR Code
(Only Power Off)
53 LIST Remote control Button
1A Q.VIEW Remote control Button C5 POWER OFF Discrete IR Code
(Only Power Off)
09 MUTE/DELETE Remote control Button
02 VOL + Remote control Button 5A AV1 Discrete IR Code
(AV1 Input Selection)
03 VOL - Remote control Button
00 CH ^ Remote control Button D0 AV2 Discrete IR Code
(AV2 Input Selection)
01 CH v Remote control Button
1E FAV/MARK Remote control Button BF COMPONENT1 Discrete IR Code
(Component1 Input
40 ^ Remote control Button Selection)
ENGLISH
ENG
NOTE 6 9
RS-232C on this TV is intended to be used
yy RS-232C IN
with third party RS-232C control hardware (CONTROL & SERVICE)
and software. The instructions below
are provided to help with programming
software or to test functionality using telenet
software. RS-232C connection cables are not No. Pin name
supplied with the product. 1 No connection
ENGLISH
ENG
4 DTR (DTE side ready)
5 GND
9 No Connection
132 EXTERNAL CONTROL DEVICE SETUP
PC TV • Language
• Caption : Off
RXD 2 3 TXD • ISM Method : Normal
• Hard of Hearing (ꔞ) : Off
TXD 3 2 RXD • Power Indicator
• Pointer
GND 5 5 GND • Smart Share Setting
• Factory Reset
DTR 4 6 DSR ? • Set ID :1 ꔀ
ꔉ
TXD RXD
ENG
DTR 4 6 DSR
*Real data mapping
DSR 6 4 DTR
0 : Step 0
RTS 7 8 CTS
…
Communication Parameters
Baud rate: 9600 bps (UART)
yy Stop bit: 1 bit
yy
Data length: 8 bits
yy Communication code: ASCII code
yy
Parity : None
yy Use a crossed (reverse) cable.
yy
ENGLISH
07. Contrast k g 00 - 64 j p (See p.137)
Method ( Plasma
)
ENG
21. Energy
08. Brightness k h 00 - 64 j q (See p.137)
Saving
22. Auto
09. Color k i 00 - 64 j u (See p.137)
Configuration
24. Channel
10. Tint k j 00 - 64 m b 00 - 01
Add/Del
11. Sharpness k k 00 - 64 25. Key m c (See p.137)
26. Backlight m g 00 - 64
12. OSD Select k l 00 - 01
( LCD )
13. Remote
Control Lock k m 00 - 01
Mode
Transmission
[Command1][Command2][ ][Set ID][ ][Data][Cr]
OK Acknowledgement
[Command2][ ][Set ID][ ][OK][Data][x]
ENGLISH
The set transmits ACK (acknowledgement) based on this format when receiving normal data. At this time,
ENG
if the data is data read mode, it indicates present status data. If the data is data write mode, it returns the
data of the PC computer.
* In this model, set will not send the status during the standby mode.
* Data Format
[Command 2] : Use as command.
[Set ID] : Use the small character, if set ID is 10, it will send the ‘0’, ‘a’.
[DATA] : Use the small character, if data is 0 x ab, it will send the ‘a’, ‘b’.
[OK] : Use the large character.
Error Acknowledgement
[Command2][ ][Set ID][ ][NG][Data][x]
The set transmits ACK (acknowledgement) based on this format when receiving abnormal data from non-
viable functions or communication errors.
Data1: Illegal Code
Data2: Not supported function
Data3: Wait more time
* In this model, set will not send the status during the standby mode.
* Data Format
[Command 2] : Use as command.
[Set ID] : Use the small character, if set ID is 10, it will send the ‘0’, ‘a’.
[DATA] : Use the small character, if data is 0 x ab, it will send the ‘a’, ‘b’.
[NG] : Use the large character
EXTERNAL CONTROL DEVICE SETUP 135
ENGLISH
code)
03. Aspect Ratio (Command: k c)
ENG
*Refer to “Real data mapping”.
To adjust the screen format.
Acknowledgement [h][ ][Set ID][ ][OK/NG][Data][x]
Transmission [k][c][ ][Set ID][ ][Data][Cr]
Data 01: 4:3 Data 0B: Full Wide
09. Color (Command: k i)
Data 02: 16:9 Data 10: Cinema Zoom 1
To adjust screen color.
Data 06: Original
…
ENGLISH
Data 01: To set
ENG
Acknowledgement [u][ ][Set ID][ ][OK/NG][Data][x]
ntpclient
Zlib/libpng libmng
ENG
procps
license libpng
zlib GNU LGPL v2.1 atk
directFB
portmap license portmap ffmpeg
glib
pixman license pixman gnuTLS
gail
X.net license libicu GTK+
BSD license netBSD iconv
Simple XML Parser libintl
xySSL libgcrypt
libgpg-error
RSA Data MD5 libgphoto2
security license libsoup
pango
JSON license JSON pyenchant
qt
MS92 license snacc uClibc
webkit
GNU GENERAL PUBLIC LICENSE We protect your rights with two steps: (1)
copyright the software, and (2) offer you this
license which gives you legal permission to copy,
Version 2, June 1991 distribute and/or modify the software.
Copyright (C) 1989, 1991 Free Software
Foundation, Inc. Also, for each author’s protection and ours, we
51 Franklin Street, Fifth Floor, Boston, MA 02110- want to make certain that everyone understands
1301, USA that there is no warranty for this free software.
Everyone is permitted to copy and distribute If the software is modified by someone else and
verbatim copies of this license document, but passed on, we want its recipients to know that
changing it is not allowed. what they have is not the original, so that any
problems introduced by others will not reflect on
Preamble the original authors’ reputations.
The licenses for most software are designed to Finally, any free program is threatened constantly
take away your freedom to share and change it. by software patents. We wish to avoid the
By contrast, the GNU General Public License is danger that redistributors of a free program will
intended to guarantee your freedom to share and individually obtain patent licenses, in effect making
change free software--to make sure the software the program proprietary. To prevent this, we have
is free for all its users. This General Public License made it clear that any patent must be licensed for
applies to most of the Free Software Foundation’s everyone’s free use or not licensed at all.
software and to any other program whose authors
commit to using it. (Some other Free Software The precise terms and conditions for copying,
Foundation software is covered by the GNU
ENGLISH
distribution and modification follow.
ENG
Lesser General Public License instead.) You can
apply it to your programs, too. TERMS AND CONDITIONS FOR COPYING,
DISTRIBUTION AND MODIFICATION
When we speak of free software, we are referring
to freedom, not price. Our General Public Licenses 0. This License applies to any program or other
are designed to make sure that you have the work which contains a notice placed by the
freedom to distribute copies of free software copyright holder saying it may be distributed
(and charge for this service if you wish), that you under the terms of this General Public License.
receive source code or can get it if you want it, The “Program”, below, refers to any such
that you can change the software or use pieces program or work, and a “work based on the
of it in new free programs; and that you know you Program” means either the Program or any
can do these things. derivative work under copyright law: that is to
say, a work containing the Program or a portion
To protect your rights, we need to make of it, either verbatim or with modifications and/
restrictions that forbid anyone to deny you these or translated into another language. (Hereinafter,
rights or to ask you to surrender the rights. These translation is included without limitation in
restrictions translate to certain responsibilities for the term “modification”.) Each licensee is
you if you distribute copies of the software, or if addressed as “you”.
you modify it.
Activities other than copying, distribution and
For example, if you distribute copies of such a modification are not covered by this License;
program, whether gratis or for a fee, you must they are outside its scope. The act of running
give the recipients all the rights that you have. You the Program is not restricted, and the output
must make sure that they, too, receive or can get from the Program is covered only if its contents
the source code. And you must show them these constitute a work based on the Program
terms so they know their rights. (independent of having been made by running
the Program). Whether that is true depends on
what the Program does.
140 OPEN SOURCE LICENSE
1. You may copy and distribute verbatim copies of can be reasonably considered independent
the Program’s source code as you receive it, in and separate works in themselves, then this
any medium, provided that you conspicuously License, and its terms, do not apply to those
and appropriately publish on each copy an sections when you distribute them as separate
appropriate copyright notice and disclaimer works. But when you distribute the same
of warranty; keep intact all the notices that sections as part of a whole which is a work
refer to this License and to the absence of any based on the Program, the distribution of the
warranty; and give any other recipients of the whole must be on the terms of this License,
Program a copy of this License along with the whose permissions for other licensees extend
Program. to the entire whole, and thus to each and every
part regardless of who wrote it.
You may charge a fee for the physical act of
transferring a copy, and you may at your option Thus, it is not the intent of this section to claim
offer warranty protection in exchange for a fee. rights or contest your rights to work written
entirely by you; rather, the intent is to exercise
2. You may modify your copy or copies of the the right to control the distribution of derivative
Program or any portion of it, thus forming a or collective works based on the Program.
work based on the Program, and copy and
distribute such modifications or work under the In addition, mere aggregation of another work
terms of Section 1 above, provided that you not based on the Program with the Program (or
also meet all of these conditions: with a work based on the Program) on a volume
of a storage or distribution medium does not
a) You must cause the modified files to carry bring the other work under the scope of this
ENGLISH
distribution and only if you received the 6. Each time you redistribute the Program (or
program in object code or executable form any work based on the Program), the recipient
with such an offer, in accord with Subsection automatically receives a license from the
b above.) original licensor to copy, distribute or modify the
Program subject to these terms and conditions.
The source code for a work means the preferred You may not impose any further restrictions on
form of the work for making modifications to the recipients’ exercise of the rights granted
it. For an executable work, complete source herein. You are not responsible for enforcing
code means all the source code for all modules compliance by third parties to this License.
it contains, plus any associated interface
definition files, plus the scripts used to control 7. If, as a consequence of a court judgment or
compilation and installation of the executable. allegation of patent infringement or for any
However, as a special exception, the source other reason (not limited to patent issues),
code distributed need not include anything that conditions are imposed on you (whether by
is normally distributed (in either source or binary court order, agreement or otherwise) that
form) with the major components (compiler, contradict the conditions of this License,
kernel, and so on) of the operating system they do not excuse you from the conditions
on which the executable runs, unless that of this License. If you cannot distribute so
component itself accompanies the executable. as to satisfy simultaneously your obligations
under this License and any other pertinent
If distribution of executable or object code obligations, then as a consequence you may
is made by offering access to copy from a not distribute the Program at all. For example,
designated place, then offering equivalent if a patent license would not permit royalty-free
ENGLISH
access to copy the source code from the same redistribution of the Program by all those who
ENG
place counts as distribution of the source code, receive copies directly or indirectly through you,
even though third parties are not compelled to then the only way you could satisfy both it and
copy the source along with the object code. this License would be to refrain entirely from
distribution of the Program.
4. You may not copy, modify, sublicense, or
distribute the Program except as expressly If any portion of this section is held invalid
provided under this License. Any attempt or unenforceable under any particular
otherwise to copy, modify, sublicense or circumstance, the balance of the section is
distribute the Program is void, and will intended to apply and the section as a whole is
automatically terminate your rights under this intended to apply in other circumstances.
License. However, parties who have received
copies, or rights, from you under this License It is not the purpose of this section to induce
will not have their licenses terminated so long you to infringe any patents or other property
as such parties remain in full compliance. right claims or to contest validity of any such
claims; this section has the sole purpose of
5. You are not required to accept this License, protecting the integrity of the free software
since you have not signed it. However, distribution system, which is implemented by
nothing else grants you permission to modify public license practices. Many people have
or distribute the Program or its derivative made generous contributions to the wide range
works. These actions are prohibited by law if of software distributed through that system
you do not accept this License. Therefore, by in reliance on consistent application of that
modifying or distributing the Program (or any system; it is up to the author/donor to decide
work based on the Program), you indicate your if he or she is willing to distribute software
acceptance of this License to do so, and all its through any other system and a licensee cannot
terms and conditions for copying, distributing or impose that choice.
modifying the Program or works based on it.
This section is intended to make thoroughly
clear what is believed to be a consequence of
the rest of this License.
142 OPEN SOURCE LICENSE
8. If the distribution and/or use of the Program is BUT NOT LIMITED TO, THE IMPLIED
restricted in certain countries either by patents WARRANTIES OF MERCHANTABILITY AND
or by copyrighted interfaces, the original FITNESS FOR A PARTICULAR PURPOSE.
copyright holder who places the Program under THE ENTIRE RISK AS TO THE QUALITY AND
this License may add an explicit geographical PERFORMANCE OF THE PROGRAM IS WITH
distribution limitation excluding those countries, YOU. SHOULD THE PROGRAM PROVE
so that distribution is permitted only in or DEFECTIVE, YOU ASSUME THE COST OF
among countries not thus excluded. In such ALL NECESSARY SERVICING, REPAIR OR
case, this License incorporates the limitation as CORRECTION.
if written in the body of this License.
12. IN NO EVENT UNLESS REQUIRED BY
9. The Free Software Foundation may publish APPLICABLE LAW OR AGREED TO IN
revised and/or new versions of the General WRITING WILL ANY COPYRIGHT HOLDER,
Public License from time to time. Such new OR ANY OTHER PARTY WHO MAY MODIFY
versions will be similar in spirit to the present AND/OR REDISTRIBUTE THE PROGRAM AS
version, but may differ in detail to address new PERMITTED ABOVE, BE LIABLE TO YOU
problems or concerns. FOR DAMAGES, INCLUDING ANY GENERAL,
SPECIAL, INCIDENTAL OR CONSEQUENTIAL
Each version is given a distinguishing version DAMAGES ARISING OUT OF THE USE
number. If the Program specifies a version OR INABILITY TO USE THE PROGRAM
number of this License which applies to it and (INCLUDING BUT NOT LIMITED TO LOSS
“any later version”, you have the option of OF DATA OR DATA BEING RENDERED
following the terms and conditions either of that INACCURATE OR LOSSES SUSTAINED BY
ENGLISH
version or of any later version published by the YOU OR THIRD PARTIES OR A FAILURE
ENG
Free Software Foundation. If the Program does OF THE PROGRAM TO OPERATE WITH
not specify a version number of this License, ANY OTHER PROGRAMS), EVEN IF SUCH
you may choose any version ever published by HOLDER OR OTHER PARTY HAS BEEN
the Free Software Foundation. ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES.
10. If you wish to incorporate parts of the Program
into other free programs whose distribution END OF TERMS AND CONDITIONS
conditions are different, write to the author
to ask for permission. For software which is
copyrighted by the Free Software Foundation,
write to the Free Software Foundation; we
sometimes make exceptions for this. Our
decision will be guided by the two goals of
preserving the free status of all derivatives of
our free software and of promoting the sharing
and reuse of software generally.
NO WARRANTY
GNU Lesser General Public For example, if you distribute copies of the library,
License whether gratis or for a fee, you must give the
recipients all the rights that we gave you. You
must make sure that they, too, receive or can get
Version 2.1, February 1999 the source code. If you link other code with the
Copyright (C) 1991, 1999 Free Software library, you must provide complete object files to
Foundation, Inc. 59 Temple Place, Suite 330, the recipients, so that they can relink them with
Boston, MA 02111-1307 USA Everyone is the library after making changes to the library and
permitted to copy and distribute verbatim copies recompiling it. And you must show them these
of this license document, but changing it is not terms so they know their rights.
allowed.
We protect your rights with a two-step method: (1)
[This is the first released version of the Lesser we copyright the library, and (2) we offer you this
GPL. It also counts as the successor of the GNU license, which gives you legal permission to copy,
Library Public License, version 2, hence the distribute and/or modify the library.
version number 2.1.]
To protect each distributor, we want to make it
Preamble very clear that there is no warranty for the free
The licenses for most software are designed to library. Also, if the library is modified by someone
take away your freedom to share and change it. else and passed on, the recipients should know
By contrast, the GNU General Public Licenses are that what they have is not the original version,
intended to guarantee your freedom to share and so that the original author’s reputation will not be
change free software--to make sure the software affected by problems that might be introduced by
ENGLISH
is free for all its users. others.
ENG
This license, the Lesser General Public License, Finally, software patents pose a constant threat
applies to some specially designated software to the existence of any free program. We wish
packages--typically libraries--of the Free Software to make sure that a company cannot effectively
Foundation and other authors who decide to restrict the users of a free program by obtaining a
use it. You can use it too, but we suggest you restrictive license from a patent holder. Therefore,
first think carefully about whether this license or we insist that any patent license obtained for a
the ordinary General Public License is the better version of the library must be consistent with the
strategy to use in any particular case, based on the full freedom of use specified in this license.
explanations below.
Most GNU software, including some libraries,
When we speak of free software, we are referring is covered by the ordinary GNU General Public
to freedom of use, not price. Our General Public License. This license, the GNU Lesser General
Licenses are designed to make sure that you have Public License, applies to certain designated
the freedom to distribute copies of free software libraries, and is quite different from the ordinary
(and charge for this service if you wish); that you General Public License. We use this license for
receive source code or can get it if you want it; certain libraries in order to permit linking those
that you can change the software and use pieces libraries into non-free programs.
of it in new free programs; and that you are
informed that you can do these things. When a program is linked with a library, whether
statically or using a shared library, the combination
To protect your rights, we need to make of the two is legally speaking a combined work,
restrictions that forbid distributors to deny you a derivative of the original library. The ordinary
these rights or to ask you to surrender these General Public License therefore permits such
rights. These restrictions translate to certain linking only if the entire combination fits its criteria
responsibilities for you if you distribute copies of of freedom. The Lesser General Public License
the library or if you modify it. permits more lax criteria for linking other code
with the library.
144 OPEN SOURCE LICENSE
We call this license the “Lesser” General Public under the terms of this Lesser General Public
License because it does Less to protect the user’s License (also called “this License”). Each
freedom than the ordinary General Public License. licensee is addressed as “you”.
It also provides other free software developers
Less of an advantage over competing non-free A “library” means a collection of software
programs. These disadvantages are the reason we functions and/or data prepared so as to be
use the ordinary General Public License for many conveniently linked with application programs
libraries. However, the Lesser license provides (which use some of those functions and data)
advantages in certain special circumstances. to form executables.
For example, on rare occasions, there may be a The “Library”, below, refers to any such
special need to encourage the widest possible use software library or work which has been
of a certain library, so that it becomes a de-facto distributed under these terms. A “work based
standard. To achieve this, non-free programs must on the Library” means either the Library or any
be allowed to use the library. A more frequent derivative work under copyright law: that is to
case is that a free library does the same job as say, a work containing the Library or a portion
widely used non-free libraries. In this case, there of it, either verbatim or with modifications and/
is little to gain by limiting the free library to free or translated straightforwardly into another
software only, so we use the Lesser General language. (Hereinafter, translation is included
Public License. without limitation in the term “modification”.)
In other cases, permission to use a particular “Source code” for a work means the preferred
library in non-free programs enables a greater form of the work for making modifications to
ENGLISH
number of people to use a large body of free it. For a library, complete source code means
ENG
software. For example, permission to use the GNU all the source code for all modules it contains,
C Library in non-free programs enables many more plus any associated interface definition files,
people to use the whole GNU operating system, plus the scripts used to control compilation and
as well as its variant, the GNU/Linux operating installation of the library.
system.
Activities other than copying, distribution and
Although the Lesser General Public License modification are not covered by this License;
is Less protective of the users’ freedom, it they are outside its scope. The act of running a
does ensure that the user of a program that is program using the Library is not restricted, and
linked with the Library has the freedom and the output from such a program is covered only
wherewithal to run that program using a modified if its contents constitute a work based on the
version of the Library. Library (independent of the use of the Library
in a tool for writing it). Whether that is true
The precise terms and conditions for copying, depends on what the Library does and what the
distribution and modification follow. Pay close program that uses the Library does.
attention to the difference between a “work based
on the library” and a “work that uses the library”. 1. You may copy and distribute verbatim copies
The former contains code derived from the library, of the Library’s complete source code as you
whereas the latter must be combined with the receive it, in any medium, provided that you
library in order to run. conspicuously and appropriately publish on
each copy an appropriate copyright notice
TERMS AND CONDITIONS FOR COPYING, and disclaimer of warranty; keep intact all the
DISTRIBUTION AND MODIFICATION notices that refer to this License and to the
absence of any warranty; and distribute a copy
0. This License Agreement applies to any software of this License along with the Library.
library or other program which contains a
notice placed by the copyright holder or other You may charge a fee for the physical act of
authorized party saying it may be distributed transferring a copy, and you may at your option
offer warranty protection in exchange for a fee.
OPEN SOURCE LICENSE 145
2. You may modify your copy or copies of the and thus to each and every part regardless
Library or any portion of it, thus forming a work of who wrote it.
based on the Library, and copy and distribute
such modifications or work under the terms of Thus, it is not the intent of this section to
Section 1 above, provided that you also meet all claim rights or contest your rights to work
of these conditions: written entirely by you; rather, the intent is to
exercise the right to control the distribution
a) The modified work must itself be a software of derivative or collective works based on
library. the Library.
b) You must cause the files modified to carry In addition, mere aggregation of another work
prominent notices stating that you changed not based on the Library with the Library (or
the files and the date of any change. with a work based on the Library) on a volume
of a storage or distribution medium does not
c) You must cause the whole of the work to bring the other work under the scope of this
be licensed at no charge to all third parties License.
under the terms of this License.
3. You may opt to apply the terms of the ordinary
d) If a facility in the modified Library refers to a GNU General Public License instead of this
function or a table of data to be supplied by License to a given copy of the Library. To do
an application program that uses the facility, this, you must alter all the notices that refer to
other than as an argument passed when this License, so that they refer to the ordinary
the facility is invoked, then you must make GNU General Public License, version 2, instead
ENGLISH
a good faith effort to ensure that, in the of to this License. (If a newer version than
ENG
event an application does not supply such version 2 of the ordinary GNU General Public
function or table, the facility still operates, License has appeared, then you can specify
and performs whatever part of its purpose that version instead if you wish.) Do not make
remains meaningful. any other change in these notices.
(For example, a function in a library to Once this change is made in a given copy, it is
compute square roots has a purpose that irreversible for that copy, so the ordinary GNU
is entirely well-defined independent of General Public License applies to all subsequent
the application. Therefore, Subsection copies and derivative works made from that
2d requires that any application-supplied copy.
function or table used by this function must
be optional: if the application does not This option is useful when you wish to copy
supply it, the square root function must still part of the code of the Library into a program
compute square roots.) that is not a library.
These requirements apply to the modified 4. You may copy and distribute the Library (or a
work as a whole. If identifiable sections portion or derivative of it, under Section 2) in
of that work are not derived from the object code or executable form under the terms
Library, and can be reasonably considered of Sections 1 and 2 above provided that you
independent and separate works in accompany it with the complete corresponding
themselves, then this License, and its terms, machine-readable source code, which must
do not apply to those sections when you be distributed under the terms of Sections 1
distribute them as separate works. But when and 2 above on a medium customarily used for
you distribute the same sections as part of a software interchange.
whole which is a work based on the Library,
the distribution of the whole must be on the If distribution of object code is made by offering
terms of this License, whose permissions for access to copy from a designated place,
other licensees extend to the entire whole, then offering equivalent access to copy the
source code from the same place satisfies the
146 OPEN SOURCE LICENSE
requirement to distribute the source code, even that the terms permit modification of the
though third parties are not compelled to copy work for the customer’s own use and reverse
the source along with the object code. engineering for debugging such modifications.
5. A program that contains no derivative of any You must give prominent notice with each
portion of the Library, but is designed to work copy of the work that the Library is used in it
with the Library by being compiled or linked and that the Library and its use are covered by
with it, is called a “work that uses the Library”. this License. You must supply a copy of this
Such a work, in isolation, is not a derivative License. If the work during execution displays
work of the Library, and therefore falls outside copyright notices, you must include the
the scope of this License. copyright notice for the Library among them,
as well as a reference directing the user to the
However, linking a “work that uses the Library” copy of this License. Also, you must do one of
with the Library creates an executable that is these things:
a derivative of the Library (because it contains
portions of the Library), rather than a “work that a) Accompany the work with the complete
uses the library”. The executable is therefore corresponding machine-readable source
covered by this License. Section 6 states terms code for the Library including whatever
for distribution of such executables. changes were used in the work (which
must be distributed under Sections 1 and
When a “work that uses the Library” uses 2 above); and, if the work is an executable
material from a header file that is part of the linked with the Library, with the complete
Library, the object code for the work may be machine-readable “work that uses the
ENGLISH
a derivative work of the Library even though Library”, as object code and/or source code,
ENG
the source code is not. Whether this is true is so that the user can modify the Library and
especially significant if the work can be linked then relink to produce a modified executable
without the Library, or if the work is itself a containing the modified Library. (It is
library. The threshold for this to be true is not understood that the user who changes the
precisely defined by law. contents of definitions files in the Library
will not necessarily be able to recompile the
If such an object file uses only numerical application to use the modified definitions.)
parameters, data structure layouts and
accessors, and small macros and small inline b) Use a suitable shared library mechanism
functions (ten lines or less in length), then the for linking with the Library. A suitable
use of the object file is unrestricted, regardless mechanism is one that (1) uses at run time
of whether it is legally a derivative work. a copy of the library already present on the
(Executables containing this object code plus user’s computer system, rather than copying
portions of the Library will still fall under Section library functions into the executable, and
6.) (2) will operate properly with a modified
version of the library, if the user installs one,
Otherwise, if the work is a derivative of the as long as the modified version is interface-
Library, you may distribute the object code compatible with the version that the work
for the work under the terms of Section 6. was made with.
Any executables containing that work also fall
under Section 6, whether or not they are linked c) Accompany the work with a written offer,
directly with the Library itself. valid for at least three years, to give the
same user the materials specified in
6. As an exception to the Sections above, you Subsection 6a, above, for a charge no more
may also combine or link a “work that uses than the cost of performing this distribution.
the Library” with the Library to produce a work
containing portions of the Library, and distribute d) If distribution of the work is made by offering
that work under terms of your choice, provided access to copy from a designated place,
OPEN SOURCE LICENSE 147
offer equivalent access to copy the above with, or distribute the Library is void, and will
specified materials from the same place. automatically terminate your rights under this
License. However, parties who have received
e) Verify that the user has already received a copies, or rights, from you under this License
copy of these materials or that you have will not have their licenses terminated so long
already sent this user a copy. as such parties remain in full compliance.
For an executable, the required form of the 9. You are not required to accept this License,
“work that uses the Library” must include since you have not signed it. However, nothing
any data and utility programs needed for else grants you permission to modify or
reproducing the executable from it. However, distribute the Library or its derivative works.
as a special exception, the materials to be These actions are prohibited by law if you do
distributed need not include anything that is not accept this License. Therefore, by modifying
normally distributed (in either source or binary or distributing the Library (or any work based
form) with the major components (compiler, on the Library), you indicate your acceptance
kernel, and so on) of the operating system of this License to do so, and all its terms and
on which the executable runs, unless that conditions for copying, distributing or modifying
component itself accompanies the executable. the Library or works based on it.
It may happen that this requirement contradicts 10. Each time you redistribute the Library (or
the license restrictions of other proprietary any work based on the Library), the recipient
libraries that do not normally accompany the automatically receives a license from the
operating system. Such a contradiction means original licensor to copy, distribute, link with or
ENGLISH
you cannot use both them and the Library modify the Library subject to these terms and
ENG
together in an executable that you distribute. conditions. You may not impose any further
restrictions on the recipients’ exercise of the
7. You may place library facilities that are a work rights granted herein. You are not responsible
based on the Library side-by-side in a single for enforcing compliance by third parties with
library together with other library facilities not this License.
covered by this License, and distribute such a
combined library, provided that the separate 11. If, as a consequence of a court judgment or
distribution of the work based on the Library allegation of patent infringement or for any
and of the other library facilities is otherwise other reason (not limited to patent issues),
permitted, and provided that you do these two conditions are imposed on you (whether by
things: court order, agreement or otherwise) that
contradict the conditions of this License,
a) Accompany the combined library with a copy they do not excuse you from the conditions
of the same work based on the Library, of this License. If you cannot distribute so
uncombined with any other library facilities. as to satisfy simultaneously your obligations
This must be distributed under the terms of under this License and any other pertinent
the Sections above. obligations, then as a consequence you may
not distribute the Library at all. For example, if
b) Give prominent notice with the combined a patent license would not permit royalty-free
library of the fact that part of it is a work redistribution of the Library by all those who
based on the Library, and explaining where receive copies directly or indirectly through
to find the accompanying uncombined form you, then the only way you could satisfy both
of the same work. it and this License would be to refrain entirely
from distribution of the Library.
8. You may not copy, modify, sublicense, link with,
or distribute the Library except as expressly If any portion of this section is held invalid
provided under this License. Any attempt or unenforceable under any particular
otherwise to copy, modify, sublicense, link circumstance, the balance of the section is
148 OPEN SOURCE LICENSE
intended to apply, and the section as a whole 14. If you wish to incorporate parts of the Library
is intended to apply in other circumstances. into other free programs whose distribution
conditions are incompatible with these,
It is not the purpose of this section to induce write to the author to ask for permission.
you to infringe any patents or other property For software which is copyrighted by the
right claims or to contest validity of any such Free Software Foundation, write to the Free
claims; this section has the sole purpose of Software Foundation; we sometimes make
protecting the integrity of the free software exceptions for this. Our decision will be guided
distribution system which is implemented by by the two goals of preserving the free status
public license practices. Many people have of all derivatives of our free software and of
made generous contributions to the wide promoting the sharing and reuse of software
range of software distributed through that generally.
system in reliance on consistent application
of that system; it is up to the author/donor NO WARRANTY
to decide if he or she is willing to distribute
software through any other system and a 15. BECAUSE THE LIBRARY IS LICENSED FREE
licensee cannot impose that choice. OF CHARGE, THERE IS NO WARRANTY FOR
THE LIBRARY, TO THE EXTENT PERMITTED
This section is intended to make thoroughly BY APPLICABLE LAW. EXCEPT WHEN
clear what is believed to be a consequence of OTHERWISE STATED IN WRITING THE
the rest of this License. COPYRIGHT HOLDERS AND/OR OTHER
PARTIES PROVIDE THE LIBRARY “AS IS”
12. If the distribution and/or use of the Library is WITHOUT WARRANTY OF ANY KIND, EITHER
ENGLISH
or by copyrighted interfaces, the original BUT NOT LIMITED TO, THE IMPLIED
copyright holder who places the Library under WARRANTIES OF MERCHANTABILITY AND
this License may add an explicit geographical FITNESS FOR A PARTICULAR PURPOSE.
distribution limitation excluding those THE ENTIRE RISK AS TO THE QUALITY
countries, so that distribution is permitted AND PERFORMANCE OF THE LIBRARY IS
only in or among countries not thus excluded. WITH YOU. SHOULD THE LIBRARY PROVE
In such case, this License incorporates the DEFECTIVE, YOU ASSUME THE COST OF
limitation as if written in the body of this ALL NECESSARY SERVICING, REPAIR OR
License. CORRECTION.
13. The Free Software Foundation may publish 16. IN NO EVENT UNLESS REQUIRED BY
revised and/or new versions of the Lesser APPLICABLE LAW OR AGREED TO IN
General Public License from time to time. WRITING WILL ANY COPYRIGHT HOLDER,
Such new versions will be similar in spirit to OR ANY OTHER PARTY WHO MAY MODIFY
the present version, but may differ in detail to AND/OR REDISTRIBUTE THE LIBRARY AS
address new problems or concerns. PERMITTED ABOVE, BE LIABLE TO YOU
FOR DAMAGES, INCLUDING ANY GENERAL,
Each version is given a distinguishing version SPECIAL, INCIDENTAL OR CONSEQUENTIAL
number. If the Library specifies a version DAMAGES ARISING OUT OF THE USE OR
number of this License which applies to it and INABILITY TO USE THE LIBRARY (INCLUDING
“any later version”, you have the option of BUT NOT LIMITED TO LOSS OF DATA OR
following the terms and conditions either of DATA BEING RENDERED INACCURATE OR
that version or of any later version published LOSSES SUSTAINED BY YOU OR THIRD
by the Free Software Foundation. If the Library PARTIES OR A FAILURE OF THE LIBRARY TO
does not specify a license version number, OPERATE WITH ANY OTHER SOFTWARE),
you may choose any version ever published by EVEN IF SUCH HOLDER OR OTHER PARTY
the Free Software Foundation. HAS BEEN ADVISED OF THE POSSIBILITY
OF SUCH DAMAGES.
OPEN SOURCE LICENSE 149
ENGLISH
This library is free software; you can redistribute
ENG
it and/or modify it under the terms of the GNU
Lesser General Public License as published by
the Free Software Foundation; either version
2.1 of the License, or (at your option) any later
version.
purposes of this definition, “control’’ means modify, display, perform, sublicense and
(a) the power, direct or indirect, to cause distribute the Modifications created by
the direction or management of such entity, such Contributor (or portions thereof)
whether by contract or otherwise, or (b) either on an unmodified basis, with other
ownership of more than fifty percent (50%) Modifications, as Covered Code and/or as
of the outstanding shares or beneficial part of a Larger Work; and
ownership of such entity.
(b) under Patent Claims infringed by the
2. Source Code License. making, using, or selling of Modifications
made by that Contributor either alone
2.1. The Initial Developer Grant. and/or in combination with its Contributor
The Initial Developer hereby grants You a Version (or portions of such combination),
world-wide, royalty-free, non-exclusive license, to make, use, sell, offer for sale, have
subject to third party intellectual property made, and/or otherwise dispose of: 1)
claims: Modifications made by that Contributor (or
portions thereof); and 2) the combination
(a) under intellectual property rights (other of Modifications made by that Contributor
than patent or trademark) Licensable by with its Contributor Version (or portions of
Initial Developer to use, reproduce, modify, such combination).
display, perform, sublicense and distribute
the Original Code (or portions thereof) with (c) the licenses granted in Sections 2.2(a) and
or without Modifications, and/or as part of a 2.2(b) are effective on the date Contributor
Larger Work; and first makes Commercial Use of the Covered
ENGLISH
Code.
ENG
(b) under Patents Claims infringed by the
making, using or selling of Original Code, to (d) Notwithstanding Section 2.2(b) above, no
make, have made, use, practice, sell, and patent license is granted: 1) for any code
offer for sale, and/or otherwise dispose of that Contributor has deleted from the
the Original Code (or portions thereof). Contributor Version; 2) separate from the
Contributor Version; 3) for infringements
(c) the licenses granted in this Section 2.1(a) caused by: i) third party modifications of
and (b) are effective on the date Initial Contributor Version or ii) the combination
Developer first distributes Original Code of Modifications made by that Contributor
under the terms of this License. with other software (except as part of the
Contributor Version) or other devices; or 4)
(d) Notwithstanding Section 2.1(b) above, under Patent Claims infringed by Covered
no patent license is granted: 1) for code Code in the absence of Modifications made
that You delete from the Original Code; 2) by that Contributor.
separate from the Original Code; or 3) for
infringements caused by: i) the modification 3. Distribution Obligations.
of the Original Code or ii) the combination
of the Original Code with other software or 3.1. Application of License.
devices. The Modifications which You create or to
which You contribute are governed by the
2.2. Contributor Grant. terms of this License, including without
Subject to third party intellectual property limitation Section 2.2. The Source Code
claims, each Contributor hereby grants You a version of Covered Code may be distributed
world-wide, royalty-free, non-exclusive license only under the terms of this License or a
future version of this License released under
(a) under intellectual property rights (other Section 6.1, and You must include a copy of
than patent or trademark) Licensable this License with every copy of the Source
by Contributor, to use, reproduce, Code You distribute. You may not offer
or impose any terms on any Source Code
152 OPEN SOURCE LICENSE
version that alters or restricts the applicable obtains such knowledge after the Modification
version of this License or the recipients’ rights is made available as described in Section
hereunder. However, You may include an 3.2, Contributor shall promptly modify the
additional document offering the additional LEGAL file in all copies Contributor makes
rights described in Section 3.5. available thereafter and shall take other steps
(such as notifying appropriate mailing lists or
3.2. Availability of Source Code. newsgroups) reasonably calculated to inform
Any Modification which You create or to those who received the Covered Code that new
which You contribute must be made available knowledge has been obtained.
in Source Code form under the terms of
this License either on the same media as (b) Contributor APIs.
an Executable version or via an accepted If Contributor’s Modifications include an
Electronic Distribution Mechanism to anyone application programming interface and
to whom you made an Executable version Contributor has knowledge of patent licenses
available; and if made available via Electronic which are reasonably necessary to implement
Distribution Mechanism, must remain that API, Contributor must also include this
available for at least twelve (12) months after information in the LEGAL file.
the date it initially became available, or at least
six (6) months after a subsequent version (c) Representations.
of that particular Modification has been Contributor represents that, except as disclosed
made available to such recipients. You are pursuant to Section 3.4(a) above, Contributor
responsible for ensuring that the Source Code believes that Contributor’s Modifications
version remains available even if the Electronic are Contributor’s original creation(s) and/or
ENGLISH
as a result of warranty, support, indemnity or maximum extent possible; and (b) describe
liability terms You offer. the limitations and the code they affect. Such
description must be included in the LEGAL file
3.6. Distribution of Executable Versions. described in Section 3.4 and must be included
You may distribute Covered Code in with all distributions of the Source Code. Except
Executable form only if the requirements to the extent prohibited by statute or regulation,
of Section 3.1-3.5 have been met for that such description must be sufficiently detailed
Covered Code, and if You include a notice for a recipient of ordinary skill to be able to
stating that the Source Code version of the understand it.
Covered Code is available under the terms
of this License, including a description 5. Application of this License.
of how and where You have fulfilled the This License applies to code to which the Initial
obligations of Section 3.2. The notice must Developer has attached the notice in Exhibit A
be conspicuously included in any notice in an and to related Covered Code.
Executable version, related documentation
or collateral in which You describe recipients’ 6. Versions of the License.
rights relating to the Covered Code. You
may distribute the Executable version of 6.1. New Versions.
Covered Code or ownership rights under a Netscape Communications Corporation
license of Your choice, which may contain (‘’Netscape’’) may publish revised and/or new
terms different from this License, provided versions of the License from time to time.
that You are in compliance with the terms Each version will be given a distinguishing
of this License and that the license for the version number.
ENGLISH
Executable version does not attempt to limit
ENG
or alter the recipient’s rights in the Source 6.2. Effect of New Versions.
Code version from the rights set forth in this Once Covered Code has been published
License. If You distribute the Executable under a particular version of the License, You
version under a different license You must may always continue to use it under the terms
make it absolutely clear that any terms which of that version. You may also choose to use
differ from this License are offered by You such Covered Code under the terms of any
alone, not by the Initial Developer or any subsequent version of the License published
Contributor. You hereby agree to indemnify by Netscape. No one other than Netscape
the Initial Developer and every Contributor for has the right to modify the terms applicable to
any liability incurred by the Initial Developer or Covered Code created under this License.
such Contributor as a result of any such terms
You offer. 6.3. Derivative Works.
If You create or use a modified version of
3.7. Larger Works. this License (which you may only do in
You may create a Larger Work by combining order to apply it to code which is not already
Covered Code with other code not governed Covered Code governed by this License),
by the terms of this License and distribute You must (a) rename Your license so that
the Larger Work as a single product. In such a the phrases ‘’Mozilla’’, ‘’MOZILLAPL’’,
case, You must make sure the requirements ‘’MOZPL’’, ‘’Netscape’’, “MPL”, ‘’NPL’’ or
of this License are fulfilled for the Covered any confusingly similar phrase do not appear
Code. in your license (except to note that your
license differs from this License) and (b)
4. Inability to Comply Due to Statute or Regulation. otherwise make it clear that Your version of
If it is impossible for You to comply with any the license contains terms which differ from
of the terms of this License with respect to the Mozilla Public License and Netscape
some or all of the Covered Code due to statute, Public License. (Filling in the name of the
judicial order, or regulation then You must: (a) Initial Developer, Original Code or Contributor
comply with the terms of this License to the in the notice described in Exhibit A shall not of
154 OPEN SOURCE LICENSE
HEREUNDER EXCEPT UNDER THIS 8.3. If You assert a patent infringement claim
ENG
ENGLISH
software documentation,’’ as such terms Code under Your choice of the MPL or the
ENG
are used in 48 C.F.R. 12.212 (Sept. 1995). alternative licenses, if any, specified by the
Consistent with 48 C.F.R. 12.212 and 48 Initial Developer in the file described in Exhibit
C.F.R. 227.7202-1 through 227.7202-4 (June A.
1995), all U.S. Government End Users acquire
Covered Code with only those rights set forth EXHIBIT A -Mozilla Public License.
herein. ``The contents of this file are subject to the Mozilla
Public License Version 1.1 (the “License”); you
11. MISCELLANEOUS. may not use this file except in compliance with
This License represents the complete the License. You may obtain a copy of the License
agreement concerning subject matter hereof. at http://www.mozilla.org/MPL/
If any provision of this License is held to
be unenforceable, such provision shall be Software distributed under the License is
reformed only to the extent necessary to distributed on an “AS IS”basis, WITHOUT
make it enforceable. This License shall WARRANTY OF ANY KIND, either express or
be governed by California law provisions implied. See the License for the specific language
(except to the extent applicable law, if any, governing rights and limitations under the License.
provides otherwise), excluding its conflict-of-
law provisions. With respect to disputes in The Original Code is _______________________.
which at least one party is a citizen of, or an The Initial Developer of the Original Code is
entity chartered or registered to do business ________________________.
in the United States of America, any litigation Portions created by ______________________ are
relating to this License shall be subject to Copyright (C) _______________________.
the jurisdiction of the Federal Courts of the All Rights Reserved.
Northern District of California, with venue Contributor(s): ________________________.
lying in Santa Clara County, California, with the
losing party responsible for costs, including Alternatively, the contents of this file may be used
without limitation, court costs and reasonable under the terms of the _____ license (the [___]
attorneys’ fees and expenses. The application License), in which case the provisions of [______]
156 OPEN SOURCE LICENSE
License are applicable instead of those above.If Apache License Version 2.0
you wish to allow use of your version of this file
only under the terms of the [____] License and Apache License
not to allow others to use your version of this file Version 2.0, January 2004
under the MPL, indicate your decision by deleting http://www.apache.org/licenses/
the provisions above and replace them with the
notice and other provisions required by the [___] TERMS AND CONDITIONS FOR USE,
License. If you do not delete the provisions above, REPRODUCTION, AND DISTRIBUTION
a recipient may use your version of this file under
either the MPL or the [___] License.” 1. Definitions.
“License” shall mean the terms and conditions
[NOTE: The text of this Exhibit A may differ slightly for use, reproduction, and distribution as
from the text of the notices in the Source Code defined by Sections 1 through 9 of this
files of the Original Code. You should use the text document.
of this Exhibit A rather than the text found in the “Licensor” shall mean the copyright owner or
Original Code Source Code for Your Modifications.] entity authorized by the copyright owner that is
granting the License.
“Legal Entity” shall mean the union of the
acting entity and all other entities that control,
are controlled by, or are under common
control with that entity. For the purposes of
this definition, “control” means (i) the power,
direct or indirect, to cause the direction or
management of such entity, whether by
ENGLISH
ENG
original work of authorship. For the purposes of such Contribution(s) was submitted. If You
this License, Derivative Works shall not include institute patent litigation against any entity
works that remain separable from, or merely (including a cross-claim or counterclaim in a
link (or bind by name) to the interfaces of, the lawsuit) alleging that the Work or a Contribution
Work and Derivative Works thereof. incorporated within the Work constitutes direct
“Contribution” shall mean any work of or contributory patent infringement, then any
authorship, including the original version of patent licenses granted to You under this
the Work and any modifications or additions to License for that Work shall terminate as of the
that Work or Derivative Works thereof, that is date such litigation is filed.
intentionally submitted to Licensor for inclusion
in the Work by the copyright owner or by an 4. Redistribution. You may reproduce and distribute
individual or Legal Entity authorized to submit on copies of the Work or Derivative Works thereof
behalf of the copyright owner. For the purposes in any medium, with or without modifications,
of this definition, “submitted” means any form and in Source or Object form, provided that You
of electronic, verbal, or written communication meet the following conditions:
sent to the Licensor or its representatives,
including but not limited to communication on (a) You must give any other recipients of the
electronic mailing lists, source code control Work or Derivative Works a copy of this
systems, and issue tracking systems that are License; and
managed by, or on behalf of, the Licensor for (b) You must cause any modified files to carry
the purpose of discussing and improving the prominent notices stating that You changed
Work, but excluding communication that is the files; and
conspicuously marked or otherwise designated (c) You must retain, in the Source form of any
ENGLISH
in writing by the copyright owner as “Not a Derivative Works that You distribute, all
ENG
Contribution.” copyright, patent, trademark, and attribution
“Contributor” shall mean Licensor and any notices from the Source form of the Work,
individual or Legal Entity on behalf of whom a excluding those notices that do not pertain
Contribution has been received by Licensor and to any part of the Derivative Works; and
subsequently incorporated within the Work. (d) If the Work includes a “NOTICE” text file as
part of its distribution, then any Derivative
2. Grant of Copyright License. Subject to the Works that You distribute must include a
terms and conditions of this License, each readable copy of the attribution notices
Contributor hereby grants to You a perpetual, contained within such NOTICE file, excluding
worldwide, non-exclusive, no-charge, royalty- those notices that do not pertain to any part
free, irrevocable copyright license to reproduce, of the Derivative Works, in at least one of the
prepare Derivative Works of, publicly display, following places: within a NOTICE text file
publicly perform, sublicense, and distribute the distributed as part of the Derivative Works;
Work and such Derivative Works in Source or within the Source form or documentation, if
Object form. provided along with the Derivative Works; or,
within a display generated by the Derivative
3. Grant of Patent License. Subject to the Works, if and wherever such third-party
terms and conditions of this License, each notices normally appear. The contents of the
Contributor hereby grants to You a perpetual, NOTICE file are for informational purposes
worldwide, non-exclusive, no-charge, royalty- only and do not modify the License. You
free, irrevocable (except as stated in this may add Your own attribution notices
section) patent license to make, have made, within Derivative Works that You distribute,
use, offer to sell, sell, import, and otherwise alongside or as an addendum to the NOTICE
transfer the Work, where such license applies text from the Work, provided that such
only to those patent claims licensable by such additional attribution notices cannot be
Contributor that are necessarily infringed by construed as modifying the License.
their Contribution(s) alone or by combination
of their Contribution(s) with the Work to which
158 OPEN SOURCE LICENSE
You may add Your own copyright statement to any character arising as a result of this License
Your modifications and may provide additional or out of the use or inability to use the Work
or different license terms and conditions for (including but not limited to damages for loss
use, reproduction, or distribution of Your of goodwill, work stoppage, computer failure
modifications, or for any such Derivative Works or malfunction, or any and all other commercial
as a whole, provided Your use, reproduction, damages or losses), even if such Contributor
and distribution of the Work otherwise complies has been advised of the possibility of such
with the conditions stated in this License. damages.
and customary use in describing the origin of END OF TERMS AND CONDITIONS
the Work and reproducing the content of the
NOTICE file.
ENGLISH
ENG
Permission to use, copy, modify, and distribute
This software is licensed as described in the this software for any purpose with or without
file COPYING, which you should have received fee is hereby granted, provided that the above
as part of this distribution. The terms are also copyright notice and this permission notice
available at http://curl.haxx.se/docs/copyright. appear in all copies.
html. You may opt to use, copy, modify, merge,
publish, distribute and/or sell copies of the THE SOFTWARE IS PROVIDED “AS IS”,
Software, and permit persons to whom the WITHOUT WARRANTY OF ANY KIND, EXPRESS
Software is furnished to do so, under the terms OR IMPLIED, INCLUDING BUT NOT LIMITED
of the COPYING file. TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE
This software is distributed on an “AS IS” basis, AND NONINFRINGEMENT OF THIRD PARTY
WITHOUT WARRANTY OF ANY KIND, either RIGHTS. IN NO EVENT SHALL THE AUTHORS
express or implied. OR COPYRIGHT HOLDERS BE LIABLE FOR
ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- fontconfig WHETHER IN AN ACTION OF CONTRACT,
Copyright (c) 2000 Keith Packard TORT OR OTHERWISE, ARISING FROM, OUT
Copyright (c) 2005 Patrick Lam OF OR IN CONNECTION WITH THE SOFTWARE
Permission to use, copy, modify, distribute, OR THE USE OR OTHER DEALINGS IN THE
and sell this software and its documentation SOFTWARE.
for any purpose is hereby granted without fee,
provided that the above copyright notice appear Except as contained in this notice, the name of a
in all copies and that both that copyright notice copyright holder shall not be used in advertising
and this permission notice appear in supporting or otherwise to promote the sale, use or other
documentation, and that the name of Keith dealings in this Software without prior written
Packard not be used in advertising or publicity authorization of the copyright holder.
pertaining to distribution of the software without
specific, written prior permission. Keith Packard
160 OPEN SOURCE LICENSE
Permission is hereby granted, free of charge, The above copyright notice and this permission
to any person obtaining a copy of this software notice shall be included in all copies or substantial
and associated documentation files (the portions of the Software.
“Software”), to deal in the Software without
restriction, including without limitation the rights THE SOFTWARE IS PROVIDED “AS IS”,
to use, copy, modify, merge, publish, distribute, WITHOUT WARRANTY OF ANY KIND, EXPRESS
sublicense, and/or sell copies of the Software, OR IMPLIED, INCLUDING BUT NOT LIMITED
and to permit persons to whom the Software TO THE WARRANTIES OF MERCHANTABILITY,
is furnished to do so, subject to the following FITNESS FOR A PARTICULAR PURPOSE AND
conditions: NONINFRINGEMENT. IN NO EVENT SHALL
THE AUTHORS OR COPYRIGHT HOLDERS
The above copyright notice and this permission BE LIABLE FOR ANY CLAIM, DAMAGES OR
notice shall be included in all copies or substantial OTHER LIABILITY, WHETHER IN AN ACTION
portions of the Software. OF CONTRACT, TORT OR OTHERWISE,
ARISING FROM, OUT OF OR IN CONNECTION
THE SOFTWARE IS PROVIDED “AS IS”, WITH THE SOFTWARE OR THE USE OR OTHER
WITHOUT WARRANTY OF ANY KIND, EXPRESS DEALINGS IN THE SOFTWARE.
OR IMPLIED, INCLUDING BUT NOT LIMITED
TO THE WARRANTIES OF MERCHANTABILITY, Except as contained in this notice, the name of
ENGLISH
FITNESS FOR A PARTICULAR PURPOSE AND Daniel Veillard shall not be used in advertising
ENG
NONINFRINGEMENT. IN NO EVENT SHALL THE or otherwise to promote the sale, use or other
DANIEL VEILLARD BE LIABLE FOR ANY CLAIM, dealings in this Software without prior written
DAMAGES OR OTHER LIABILITY, WHETHER authorization from him.
IN AN ACTION OF CONTRACT, TORT OR
OTHERWISE, ARISING FROM, OUT OF OR IN - lua interpreter
CONNECTION WITH THE SOFTWARE OR THE Copyright © 1994–2010 Lua.org, PUC-Rio.
USE OR OTHER DEALINGS IN THE SOFTWARE. Permission is hereby granted, free of charge,
to any person obtaining a copy of this software
Except as contained in this notice, the name of and associated documentation files (the
Daniel Veillard shall not be used in advertising “Software”), to deal in the Software without
or otherwise to promote the sale, use or other restriction, including without limitation the rights
dealings in this Software without prior written to use, copy, modify, merge, publish, distribute,
authorization from him sublicense, and/or sell copies of the Software,
and to permit persons to whom the Software
- libxslt is furnished to do so, subject to the following
Copyright (C) 2001-2002 Daniel Veillard. conditions:
Copyright (C) 2001-2002 Thomas Broyer, Charlie
Bozeman and Daniel Veillard. The above copyright notice and this permission
notice shall be included in all copies or substantial
All Rights Reserved. portions of the Software.
Permission is hereby granted, free of charge, THE SOFTWARE IS PROVIDED “AS IS”,
to any person obtaining a copy of this software WITHOUT WARRANTY OF ANY KIND, EXPRESS
and associated documentation files (the OR IMPLIED, INCLUDING BUT NOT LIMITED
“Software”), to deal in the Software without TO THE WARRANTIES OF MERCHANTABILITY,
restriction, including without limitation the rights FITNESS FOR A PARTICULAR PURPOSE AND
to use, copy, modify, merge, publish, distribute, NONINFRINGEMENT. IN NO EVENT SHALL
sublicense, and/or sell copies of the Software, THE AUTHORS OR COPYRIGHT HOLDERS
OPEN SOURCE LICENSE 161
The original packager is Adam Di Carlo <aph@ This license applies to all files found in such
debian.org>. packages, and which do not fall under their
The current maintainer is Ardo van Rangelrooij own explicit license. The license affects thus
<ardo@debian.org>. the FreeType font engine, the test programs,
documentation and makefiles, at the very least.
Copyright (c) 1998, 1999, 2000 Thai Open Source This license was inspired by the BSD, Artistic, and
Software Center Ltd and Clark Cooper IJG (Independent JPEG Group) licenses, which
Copyright (c) 2001, 2002, 2003, 2004, 2005, 2006 all encourage inclusion and use of free software
Expat maintainers. in commercial and freeware products alike. As a
consequence, its main points are that:
- We don’t promise that this software works.
ENGLISH
Permission is hereby granted, free of charge, to
ENG
any person obtaining a copy of this software and However, we will be interested in any kind of
associated documentation files (the “Software”), bug reports. (`as is’ distribution)
to deal in the Software without restriction, - You can use this software for whatever you
including without limitation the rights to use, copy, want, in parts or full form, without having to
modify, merge, publish, distribute, sublicense, pay us. (`royalty-free’ usage)
and/or sell copies of the Software, and to permit - You may not pretend that you wrote this
persons to whom the Software is furnished to do software. If you use it, or only parts of
so, subject to the following conditions: it, in a program, you must acknowledge
somewhere in your documentation that you
The above copyright notice and this permission have used the FreeType code. (`credits’)
notice shall be included in all copies or substantial We specifically permit and encourage the inclusion
portions of the Software. of this software, with or without modifications, in
commercial products. We disclaim all warranties
THE SOFTWARE IS PROVIDED “AS IS”, covering The FreeType Project and assume no
WITHOUT WARRANTY OF ANY KIND, EXPRESS liability related to The FreeType Project.
OR IMPLIED, INCLUDING BUT NOT LIMITED
TO THE WARRANTIES OF MERCHANTABILITY, Finally, many people asked us for a preferred form
FITNESS FOR A PARTICULAR PURPOSE AND for a credit/disclaimer to use in compliance with
NONINFRINGEMENT. IN NO EVENT SHALL this license. We thus encourage you to use the
THE AUTHORS OR COPYRIGHT HOLDERS following text:
BE LIABLE FOR ANY CLAIM, DAMAGES OR Portions of this software are copyright <year>
OTHER LIABILITY, WHETHER IN AN ACTION OF The FreeType Project (www.freetype.org). All
CONTRACT, TORT OR OTHERWISE, ARISING rights reserved.
FROM, OUT OF OR IN CONNECTION WITH THE Please replace <year> with the value from the
SOFTWARE OR THE USE OR OTHER DEALINGS FreeType version you actually use.
IN THE SOFTWARE.
162 OPEN SOURCE LICENSE
must contact us to verify this. Neither the FreeType authors and contributors
ENG
ENGLISH
ENG
(2) If only executable code is distributed, then the Project” must not be used to endorse or
accompanying documentation must state that promote products derived from this software
“this software is based in part on the work of without prior written permission. For written
the Independent JPEG Group”. permission, please contact openssl-core@
openssl.org.
(3) Permission for use of this software is granted 5. Products derived from this software may not be
only if the user accepts full responsibility for called “OpenSSL” nor may “OpenSSL” appear
any undesirable consequences; the authors in their names without prior written permission
accept NO LIABILITY for damages of any kind. of the OpenSSL Project.
6. Redistributions of any form whatsoever must
retain the following acknowledgment:
“This product includes software developed by
the OpenSSL Project for use in the OpenSSL
Toolkit (http://www.openssl.org/)”
commercial use as long as the following conditions PARTICULAR PURPOSE ARE DISCLAIMED.
ENG
are aheared to. The following conditions apply to IN NO EVENT SHALL THE AUTHOR OR
all code found in this distribution, be it the RC4, CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
RSA, lhash, DES, etc., code; not just the SSL INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
code. The SSL documentation included with this OR CONSEQUENTIAL DAMAGES (INCLUDING,
distribution is covered by the same copyright BUT NOT LIMITED TO, PROCUREMENT OF
terms except that the holder is Tim Hudson (tjh@ SUBSTITUTE GOODS OR SERVICES; LOSS
cryptsoft.com). OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND
Copyright remains Eric Young’s, and as such ON ANY THEORY OF LIABILITY, WHETHER
any Copyright notices in the code are not to be IN CONTRACT, STRICT LIABILITY, OR TORT
removed. If this package is used in a product, Eric (INCLUDING NEGLIGENCE OR OTHERWISE)
Young should be given attribution as the author ARISING IN ANY WAY OUT OF THE USE OF
of the parts of the library used. This can be in the THIS SOFTWARE, EVEN IF ADVISED OF THE
form of a textual message at program startup or POSSIBILITY OF SUCH DAMAGE.
in documentation (online or textual) provided with
the package. The licence and distribution terms for any publically
available version or derivative of this code cannot
Redistribution and use in source and binary be changed. i.e. this code cannot simply be
forms, with or without modification, are permitted copied and put under another distribution licence
provided that the following conditions are met: [including the GNU Public Licence.]
ENGLISH
ENG
WARRANTIES OF ANY KIND INCLUDING THE
1. The origin of this software must not be WARRANTIES OF DESIGN, MERCHANTIBILITY
misrepresented; you must not claim that you AND FITNESS FOR A PARTICULAR PURPOSE,
wrote the original software. If you use this OR ARISING FROM A COURSE OF DEALING,
software in a product, an acknowledgment USAGE OR TRADE PRACTICE.
in the product documentation would be
appreciated but is not required. Sun RPC is provided with no support and without
2. Altered source versions must be plainly marked any obligation on the part of Sun Microsystems,
as such, and must not be misrepresented as Inc. to assist in its use, correction, modification or
being the original software. enhancement.
3. This notice may not be removed or altered from SUN MICROSYSTEMS, INC. SHALL HAVE
any source distribution. NO LIABILITY WITH RESPECT TO THE
INFRINGEMENT OF COPYRIGHTS, TRADE
Jean-loup Gailly SECRETS OR ANY PATENTS BY SUN RPC OR
Mark Adler ANY PART THEREOF.
associated documentation files (the “Software”), FITNESS FOR A PARTICULAR PURPOSE AND
to deal in the Software without restriction, NONINFRINGEMENT OF THIRD PARTY RIGHTS.
including without limitation the rights to use, copy, IN NO EVENT SHALL THE COPYRIGHT HOLDER
modify, merge, publish, distribute, sublicense, OR HOLDERS INCLUDED IN THIS NOTICE BE
and/or sell copies of the Software, and to permit LIABLE FOR ANY CLAIM, OR ANY SPECIAL
persons to whom the Software is furnished to do INDIRECT OR CONSEQUENTIAL DAMAGES,
so, subject to the following conditions: OR ANY DAMAGES WHATSOEVER RESULTING
FROM LOSS OF USE, DATA OR PROFITS,
The above copyright notice and this permission WHETHER IN AN ACTION OF CONTRACT,
notice (including the next paragraph) shall be NEGLIGENCE OR OTHER TORTIOUS ACTION,
included in all copies or substantial portions of the ARISING OUT OF OR IN CONNECTION WITH THE
Software. USE OR PERFORMANCE OF THIS SOFTWARE.
THE SOFTWARE IS PROVIDED “AS IS”, Except as contained in this notice, the name of a
WITHOUT WARRANTY OF ANY KIND, EXPRESS copyright holder shall not be used in advertising
OR IMPLIED, INCLUDING BUT NOT LIMITED or otherwise to promote the sale, use or other
TO THE WARRANTIES OF MERCHANTABILITY, dealings in this Software without prior written
FITNESS FOR A PARTICULAR PURPOSE AND authorization of the copyright holder.
NONINFRINGEMENT. IN NO EVENT SHALL
THE AUTHORS OR COPYRIGHT HOLDERS
BE LIABLE FOR ANY CLAIM, DAMAGES OR
OTHER LIABILITY, WHETHER IN AN ACTION OF
CONTRACT, TORT OR OTHERWISE, ARISING
FROM, OUT OF OR IN CONNECTION WITH THE
SOFTWARE OR THE USE OR OTHER DEALINGS
IN THE SOFTWARE.
OPEN SOURCE LICENSE 167
ENGLISH
conditions and the following disclaimer in the
ENG
documentation and/or other materials provided
3. All advertising materials mentioning features or with the distribution.
use of this software must display the following
acknowledgement: 3. The name of the author may not be used to
This product includes software developed endorse or promote products derived from
by the NetBSD Foundation, Inc. and its this software without specific prior written
contributors. permission.
4. Neither the name of The NetBSD Foundation THIS SOFTWARE IS PROVIDED BY THE
nor the names of its contributors may be used AUTHOR ``AS IS’’ AND ANY EXPRESS OR
to endorse or promote products derived from IMPLIED WARRANTIES, INCLUDING, BUT
this software without specific prior written NOT LIMITED TO, THE IMPLIED WARRANTIES
permission. OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE ARE DISCLAIMED. IN
THIS SOFTWARE IS PROVIDED BY THE NETBSD NO EVENT SHALL THE AUTHOR BE LIABLE
FOUNDATION, INC. AND CONTRIBUTORS FOR ANY DIRECT, INDIRECT, INCIDENTAL,
``AS IS’’ AND ANY EXPRESS OR IMPLIED SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
WARRANTIES, INCLUDING, BUT NOT DAMAGES (INCLUDING, BUT NOT LIMITED TO,
LIMITED TO, THE IMPLIED WARRANTIES OF PROCUREMENT OF SUBSTITUTE GOODS OR
MERCHANTABILITY AND FITNESS FOR A SERVICES; LOSS OF USE, DATA, OR PROFITS;
PARTICULAR PURPOSE ARE DISCLAIMED. OR BUSINESS INTERRUPTION) HOWEVER
IN NO EVENT SHALL THE FOUNDATION OR CAUSED AND ON ANY THEORY OF LIABILITY,
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, WHETHER IN CONTRACT, STRICT LIABILITY,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR TORT (INCLUDING NEGLIGENCE OR
OR CONSEQUENTIAL DAMAGES (INCLUDING, OTHERWISE) ARISING IN ANY WAY OUT OF THE
BUT NOT LIMITED TO, PROCUREMENT OF USE OF THIS SOFTWARE, EVEN IF ADVISED OF
SUBSTITUTE GOODS OR SERVICES; LOSS THE POSSIBILITY OF SUCH DAMAGE.
OF USE, DATA, OR PROFITS; OR BUSINESS
168 OPEN SOURCE LICENSE
permission.
ENG
ENGLISH
ENG
FITNESS FOR A PARTICULAR PURPOSE AND
NONINFRINGEMENT. IN NO EVENT SHALL
THE AUTHORS OR COPYRIGHT HOLDERS
BE LIABLE FOR ANY CLAIM, DAMAGES OR
OTHER LIABILITY, WHETHER IN AN ACTION OF
CONTRACT, TORT OR OTHERWISE, ARISING
FROM, OUT OF OR IN CONNECTION WITH THE
SOFTWARE OR THE USE OR OTHER DEALINGS
IN THE SOFTWARE.
NOTE
ENG
Some video codecs listed in the manual may not be
supported, depending on the region (country).
POR
Alguns codecs de vídeo listados no manual podem não
ser suportados, dependendo da região (país).
POL
Niektóre kodeki wideo wymienione w instrukcji mogą
nie być obsługiwane, w zależności od regionu (kraju).
SPA
Algunos códecs de vídeo que figuran en el manual
pueden no ser compatibles, dependiendo de la región
(país).
THA
The model and serial numbers of the TV is
located on the back of the TV
Record it below should you ever need service.
MODEL
SERIAL