OSE POWER PANT & FED TE AS few eT
ENGINE POWER PLANT PACKAGE III (FIXED. 2 [ao
namenen * [aaa
comaconcoemarneny |
| Daeoar
ra :
oo
[Can [er
er ee
| aNeraerE 7 | score
5
Tr
i
rerrown-coesnarnauevecouacron |
"FROM RESPONSIBILITY FOR ERRORS AND |
DEVIATIONS FROM CONTRACT REQUIREMENTS
ee, - es nrudesebaeal
onre: 57 teat i
vos [on °
or [comer 8
FT PERUSAHAAN USTRK NEGARA (=RSERO}
UNITINDUX PEMBANGUNAN KALBAGTIM
PT. AMYTHAS SUPERUI!KONSTRUKS,
ATERAL APPROVAL FOR METAL ROOF AND SING
ISSUED FoR APPROVAL
$ i ¢
CONTRACTOR DOCKS
CDRS
SOHRARIANT ENG-DED-SLR-CV-03-U-009CONSORTIUM OF PT. WIJAYA KARYA &
PT, WHAYA KARYA REKAYASA KONSTRUKSI Grid) BAYA
KONSTRURSL
ibatpaoat ENGINEERING DOCUMENT
PLTMG TANJUNG
SELOR 15 MW
REE MATERIAL APPROVAL FOR Page 2 of 14
ENG-DED-SLR-CV- METAL ROOF AND CLADDING
03.U1.009
REVISION HISTORICAL SHEET
Rev No Date Description
° 25972017 ISSUED FOR APPROVAL
1 S1/2018
INTERNAL
Rev No Date Description
0 2509/2017 ISSUED FOR APPROVAL
1 an2018 ISSUED FOR APPROVALCONSORTIUM OF PT. WIAYA KARYA &
REVISION HISTORICAL SHEET
TABLE OF CONTENTS... i a
MATERIAL SUBMITTAL DATA .v-sssnssensen
MATERIAL SPECIFICATION COMPARISON SHEET.
Appendix-1__ Material Specification
Appendix-2. PT. Utomo Deck
Technical Data
Company Profile
Appendix-3. PT. Gratia Fedi Kusuma
‘Technical Data
Company Profile
PT. WHJAYA KARYA REKAYASA KONSTRUKSI (rir) ERAS,
WH ONSTRURS:
Spann ENGINEERING DOCUMENT
PLTMG TANJUNG
SELOR 15 MW
MATERIAL APPROVAL FOR Page 3 of 14
ENG-DED-SLR-CV- METAL ROOF AND CLADDING
03-0-009
TABLE OF CONTENTS
RenCONSORTIUM OF PT. WJAYA KARYA &
PT. WJAYA KARYA REKAYASA KONSTRUKSI
arpa ENGINEERING DOCUMENT
PLTMG TANIUNG
SELOR 15 MW
MATERIAL APPROVAL FOR Page 4 of 14
ENG-DED-SLR-CV- METAL ROOF AND CLADDING
03-U-009
MATERIAL SUBMITTAL DATA.
Item Description : Roofing and Cladding
b.Type Metal Roofing with Insulation (Sandwiteh)
Metal Roofing
Double Cladding with Insulation
ec. Standard
d. Manufacturer
¢, Other Information
Roofing for designated steel structures shall be of single
ply, built-up metal construction with fiberglass insulation
and thermal membrane layer, for noise and heat reduction,
Double sided metal roof shall be used in roof system.
The walls of main plant buildings shall consist of metal wall
panel systems. Metal wall panels shall be of the field-erected
type with concealed fasteners. Where required, liner panels
shall be zine aluminium with minimum thickness 0.72mm
finished coat PVF2. The profile of the face panels shall be
ribbed with interlocking joints. Where insulation is required
for metal wall panels, it shall consist of a glass fibre and
mineral wool, semi rigid type inserted in the liner panel.
: PT, Utomodeck
PT. Gratia Fedi Kusuma
: Brochure (attached)‘CONSORTIUM OF PT. WUAYA KARYA &
TT.WAVAKARYA REKAYASAKONSTRUKSI | (Gams,
somites: ENGINEERING DOCUMENT i
PLTMG TANIUNG
SELOR 13 MW
MATERIAL APPROVAL FOR Page 5 of 14
METAL ROOF AND CLADDING
MATERIAL SPECIFICATION COMPARISON SHEET
NO. ‘OWNER'S SPECIFICATION ‘CONTRACTOR'S PROPOSAL
Roofing
Zine aluminium with minimum thickness
072mm finished coat PVF2.
Cladding:
Zine aluminium with minimum thickness
0.72mm finished coat PVF2.
Insulation :
Min, Density 60 Kg/M3
‘Thermal Conductivity 0.75 wattlm2 °C in
still air
NRC 0.85
PT. Utomo Deck
See Appendix-2
(Product Specifications)
PT. Gratia Fedi Kusuma
See Appendix-3
(Product Specifications)CONSORTIUM OF PT. WIAYA KARYA &
PT. WIJAYA KARYA REKAYASA KONSTRUKSI
ENGINEERING DOCUMENT
CR
Material Specification
PLTMG TANJUNG
SELOR 15 MW
MATERIAL APPROVAL FOR Page 6 of 14
ENG-DED-SLR-CV- METAL ROOF AND CLADDING
009
Appendix-1CONSORTIUM OF PT. WIJAYA KARYA &
PT. WLIAYA KARVA REKAYASA KONSTRUKSI Gira) ,REKAYASA,
IKONSTRUKS.
oie ENGINEERING DOCUMENT
PLIMG TANIUNG
SELOR 15 MW
Pe MATERIAL APPROVAL FOR Page 7 of 14
ENG-DED-SLA-CY. | METAL ROOF AND CLADDING
03-U1-009
4415.11 Walls
‘The walls of main plaat buildings shell consist of metal wall panel systems. Metal wall
panels shall be ofthe field-