Professional Documents
Culture Documents
GM32
In-situ Gas Analyzer
Simultaneous or individual
measurement of SO2, NO, NO2 and NH3
as well as temperature and pressure
certified
GM32
Direct measurement of reactive gases
The GM32 in-situ gas analyzer measures the reactive SICK has brought the spectral DOAS evaluation method
gases SO2, NO, NO2 and NH3 as well as pressure and tem- to perfection, because the GM32 now measures simulta-
perature in the gas duct – directly, fast and without gas neously in large as well as small measuring ranges with
sampling and transport. With this your process systems constant high precision. Concerning the cost of owner-
work with the true values in “real time”. Thanks to self- ship, the in-situ analyzers from SICK have proven their
monitoring you can rely on the measurement results at superiority through minimum operating costs. Mainte-
any time. And in case of a malfunction an early warning nance effort and problems caused by gas transport and
will be shown in time. For emission measurement of SO2 gas conditioning do not even arise. Adjustment with test
and NO, GM32 is tested for suitability according to the gases is not required.
new European standard EN 15267-3.
A r e a s o f a pp l i c at i o n
• Representative due to measurement • Installation from one side • Gas test according to EPA possible
over the complete duct diameter • For high dust concentrations • For highest dust concentrations
• Ideal with aggressive or very hot • Flexible use because of fixed active • For turbulent gas flows
gases – no duct installations measuring path • Installation from one side
• Lowest measuring ranges for large • Integrated zero point path • Flexible use because of fixed active
duct diameters
measuring path
• Unaffected by duct movement due to
automatic self-alignment
K e y f e at u r e s
• Up to 6 measuring components at the same time (includ- • Direct measurement without sampling
ing sample gas pressure and temperature) • Reliable measuring results for high dust concentrations
• Automatic self-test function (QAL3) without test gases • Very long maintenance-free intervals
• Several independent measuring ranges with automatically • Modular design – enables fast on-site service
optimized precision possible
2 G M 3 2 | S IC K
GM32 System versions
Reflector
Sender/receiver unit
Mounting flange
Sender/receiver Mounting flange unit
unit
Measuring probe
(GMP shown)
UV absorptions spectra
G M 3 2 | S IC K 3
8012701/2009-01 · DIV03/KE ∙ Printed in Germany (2008-12) ∙ Subject to modifications∙ Specified product characteristics and technical data do not serve as guarantee declarations.
For further information and technical data concerning the analyzer, see:
• Data Sheet GM32, cross duct version, Part No. 8012710
• Data Sheet GM32, probe version, Part No. 8012713
• Operating Instructions GM32, cross duct version, Part No. 8012704
• Operating Instructions GM32, probe version , Part No. 8012707