Professional Documents
Culture Documents
Environmental drilling
Exploration drilling
Remediation drilling
Geothermal drilling
Seismic drilling
Dewatering drilling
Bomb detection drilling
Foundation drilling
Environmental sampling
Minerals sampling
Archaeological sampling
Railway bed sampling
Off shore sampling
CPT and sonic
Special purpose drilling
The Compact Sonic System is designed to run a large variety of down-hole tooling to:
More rigid clay soils prove harder to penetrate, below the water table this process is accelerated
however, sonic sampling gives extremely nice cores even in sandy and fine gravel. Through the
high frequency vibrations just a small part of the sample area outside is affected by the
vibrations. A recovery rate of 95% often will be reached. Another big advantage of Sonic
vibrations. In addition to the vertical vibration, the sonic drill heads can also rotate to easily make
up and break drill rods, and to cut concrete, stone or asphalt.
The application of Sonic sampling is in the sampling with high-grade quality using the Aqua-lock
method (for instance for archaeological purposes, sand dredging wells, filtration research for
drinking water companies, geophysical research, prospecting for gold veins etc.), and in placing
of quality filters hype 32mm, Direct-well filters (1”) hype 63mm, all types of sensors (for instance
divers; small water monitoring loggers), seismic explosive charges in the soil through the lost
cone method. Sonic sampling also be used in percussion gauge sampling, placing aeration- and /
or rinsing hoses for remediation projects (lost cone method), and for the extension of the
possibilities (depth / diameter) of cone penetrations test machines.
APPLICATIONS:
The SONIC system has many applications:
• High-quality continuous soil sampling for environmental, geotechnical, construction, and
archaeological sampling
• Saturated sand, silt and clay samples in wetlands, beaches, and estuaries
• Sandstone, limestone, siltstone, and coarse sediments
• Monitoring well installations
• Seismic explosive charge installations (seismic shothole drilling)
• Sensor and monitoring point installations
• Injection points for in-situ remediation
• Groundwater and vapour sampling
• Geothermal and heat exchange system installations
• Grouting and tie-back installations
Our Services:
We offer the services of drilling the cores in the areas under investigation with the latest models
of our sonic machines and offer to contribute to your projects with the aims to improve the
project quality and reduce effort, cost and shorten project time.
However, we are looking forward to negotiations about your needs and applications.
www.GeoSonicDrilling.ro
Office@GeoSonicDrilling.ro