Professional Documents
Culture Documents
General features
The various functions presented by these » Narrow support pieces for small size profiles.
series provide solutions for any type of » It can incorporate a microswitch.
assembly, both for single and double leaf » Easy to install thanks to:
doors. All models present the following -Vertical rod devices are adjusted to 40 mm
features: -The horizontal bar can be cut to fit in with
doors of varying degrees of width.
» Easily reversible. » Standard finish:
» Compatible with firebreak doors. -Support pieces, vertical rod devices and
» External operation with: auxiliary locks in BLACK (RAL 9005).
-Modular handle: its European-profile -Active bar in GREEN (RAL 6002).
30x10 mm cylinder makes it fit for -Other finish combinations can be ordered:
installation in doors of varying degrees of
thickness.
-Sena handle: equipped with an adjustable
cylinder for 32-to-80 mm-thick doors.
REVERSIBILITY
ADJUSTMENT
6
Rim model
Rim panic device with a lateral lock point.
1910 Stainless steel swing latch.
Outside devices; see page 12 / VE.
EN 1125 certification:
3 7 6 1 1 3 2 2 A
The box includes:
» 1 main support and another secondary one.
» 1 oval shaped horizontal bar, 900 mm in length.
» Accessories: Fixing screws, screws witch support the horizontal
bar, 1 square spindle and strike.
» Assembly instructions and installation template.
39
208
30
14,5
890
1020
3 7 6 1 1 3 2 2 A
Operation:
Ø12
The upper vertical rod is found in the
strike supported by the door frame,
and the lower one in the floor strike. By
activating the panic device the vertical
rods are released from their clasps
and are held by the rod retainer. On 39
7
PUSH TYPE PANIC EXIT DEVICES. UNIVERSAL SERIES
Rim model
14,5
39
19
104
Standard height: 2210mm.
Outside devices. see page 12 / VE. Ø12
Certificación EN 1125:
3 7 6 1 1 3 2 2 A
The box includes:
» 1 main support and a secondary
support. 39
2210
900 mm length.
» 2 vertical rods of 930 mm.
208
» Accessories bag includes: Fixing
screws, screws witch support the
horizontal bar, 1 square spindle, 2 890
1090
installation template.
» 2 locking points, upper and lower.
14,5
39
19
Steel swing latches.
104
Standard height: 2210mm.
Outside devices, see page 12 / VE. Ø12
3 7 6 1 1 3 2 2 A
The box includes:
» 1 main support and a secondary
support.
» 1 oval shape horizontal bar of 39
900 mm length.
2210
8
Rim model
3 7 6 1 1 3 2 2 A
The box includes:
» 1 main support and a secondary support.
» 1 oval shape horizontal bar of 900 mm
length.
» 2 vertical rods of 930 mm.
» Accessories bag includes: Fixing screws,
screws witch support the horizontal bar, 1
square spindle , 2 vertical rod guides and
strikes.
» Assembly instructions and installation
template.
» 2 locking points, upper and lower.
60
14,5
40
60
39
14,5
2210
30
208,5
890
100 1020
1090
9
PUSH TYPE PANIC EXIT DEVICES. UNIVERSAL SERIES
3 5
4 1
2
20
13
length.
9
8
» 1 main support and 1 auxiliary support. 12
» 1 inner plate (Ref. E1971INNE) to be used
185
72
175
26
85
only with CF60 lock series
» Assembly instructions and installation
35
template. 3
25
32
3
» Accessories: CF60 65 20
2035T 4039T
9 mm follower 8 mm follower 8 mm follower 50 (60,70)
-Fixing screws Reversible Specify hand
-Screws witch support the horizontal bar.
-A plastic hub cap (to be placed with the 3 - OUTSIDE DEVICES
inner plate)
-Squares spindles: The outside device must be selected
Panic device with 8 mm follower: depending on the type of lock. Two models
• Double screwed square spindle 8/8 are available: one for CF60 lock and the
+ 8/8. other suitable for 2035T and 4039T.
Panic device with 9 mm follower:
• Double screwed square spindle 9/9
+ 9/9. 4 - CYLINDERS
5 - Squares spindles
55 3 67
125
55 3 67
125
10
Mortice Model 1970. Double doors.
ACTIVE DOOR
Use a 1970 model panic device with 9 mm follower + CF60 lock + outside accessory.
Ø 10
Ø 7,3
24
9
185
235
40
3
65 20
11
PUSH TYPE PANIC EXIT DEVICES. UNIVERSAL SERIES
Outside device
RIM MODELS
45
Adjustable
45
72
cylinder
available witl
all systems. 29
8
S1912EX E1910EX E1911EX S1913EX TTF10U
45
30 x 10
45
185
72
cylinder with
30
r=15 mm
X
M5
*Solutions not available for panic exit devices installed with upper and lower locking
points.
MORTICE MODELS
21,5
72
21,5
21,5
90,5
90,5
72
72
90,5
90,5
90,5
29 29
8 8
29 29 29
8 8 8
EDF90EX EDF91EX SDF92EX SDF93EX TTF72U
45
45
45
21,5
21,5
21,5
21,5
85
85
29 29
29 29
8 8
8 8
EDF30EX EDF31EX SDF33EX TTF85U
12
TOUCH EXIT PANIC DEVICES, TOP SERIES
General features
The purpose of this new product range » Vertical rod device cover.
is to complete TESA’s wide range of exit » Clutched external operating:
panic devices and to be able to meet all the -SENA handle: with an European-profile.
increasingly high demands in the market Door with + 25 mm.
with a product of high technical advantages -Institutional handle: with an European-
and a design in keeping with the latest profile cylinder
architectural trends. This new range of » Latches present a security device.
TESA’s exit panic devices presents the » Low projection.
following features: » It can incorporate a microswitch.
» Optional passage function
» Easily reversible. » It can incorporate a motorized latch
» Compatible with firebreak doors. » It can be installed on single and double leaf
» Very easy to install: doors
-Adjustable 50 mm. » STD finish:
-Starting with four STD sizes (for doors -Fixed bar and vertical rod device cover:
of 600 mm, 800 mm, 1000 mm and anodized aluminium.
1200 mm) the bar can be cut to fit in -Central covers and high/low auxiliary
with the width of the door. locks: SILVER RAL9006.
-35 mm adjusting of the vertical rod -Active bar: SILVER RAL9006
devices. -Also available in other finishes: lime
green, stainless,....
SILVER/SILVER FINISH
Anodized Alum. Silver RAL 9006 Silver RAL 9006
Covers •
Rod covers •
Fixed bar •
Active bar •
SILVER/LIME FINISH
Anodized Alum. Silver RAL 9006 Line finish
Covers •
Rod covers •
Fixed bar •
Active bar •
STAINLESS FINISH
St. Steel
Covers •
Rod covers •
Fixed bar •
Active bar •
Standard door lengths: for
doors of 600mm, 800 mm,
1000 mm and 1200 mm.
17
TOUCH EXIT PANIC DEVICES, TOP SERIES
Rim model
Rim panic device with a lateral locking point. Stainless steel orbital
TOP1S latch.
Outside devices; see page 22/VE.
Certification UNE-EN 1125:
3 7 6 1 1 4 2 2 B
The box includes:
» 1 horizontal bar and a modular head.
» Accessories: Square spindle, fixing screws, strike, follower,
covers for vertical rod ends and base plate.
» Assembly instructions and installation template.
Rim panic device with 2/3 locking points: central, upper and lower.
TOP3S Stainless steel orbital latch.
Outside devices; see page 22/VE.
Certification UNE-EN 1125:
3 7 6 1 1 4 2 2 B
The box includes:
» 1 horizontal bar and a modular head.
» 930 mm length vertical rod.: 2 units.
» 2 locking points, upper and lower.
» Accessories:Fixing screws, 3 strikes: upper, central and lower,
follower, 1 cover for central locking point, square spindle and
base plate.
» Assembly instructions and installation template.
» 2 vertical rod covers.
18
Rim model
Rim panic device with 2 locking points with steel roller bolts.
TOP20 Outside devices; see page 22/VE.
Certification UNE-EN 1125:
3 7 6 1 1 4 2 2 B
The box includes:
» 1 horizontal bar and a modular head.
» 930 mm length vertical rod.: 2 units.
» 2 locking points, upper and lower.
» Accessories:Fixing screws, 2 strikes: upper and lower, follower,
square spindle and base plate.
» Assembly instructions and installation template.
» 2 vertical rod covers.
19
TOUCH EXIT PANIC DEVICES, TOP SERIES
3
5
4
2
13
Ref.: CDCF6089M
9
8
12
185
72
175
26
85
35
3
25
32
3
CF60 65 20
2035T 4039T
9 mm 8 mm follower 8 mm follower 50 (60,70)
follower Specify hand
Reversible
20
Mortice model: double leaf solution
21
Outside devices
RIM MODEL
45
45
72
29
8
S1912EX E1910EX S1913EX
Cilindro
30 x 10 de r=15 mm
en cualquier sistema
MMPS1 MMPP4
MORTICE MODEL
21,5
21,5
21,5
21,5
72
90,5
72
72
90,5
90,5
90,5
90,5
29
8 29
29 29 29
8
8 8 8
EDF90EX EDF91EX SDF92EX SDF93EX TTF72U
68 68
45
45
45
45
21,5
21,5
21,5
21,5
85
85
29 29
29 29
8 8
8 8
EDF30EX EDF31EX SDF33EX TTF85U
22
PANIC EXIT DEVICE FOR HANDICAPPED
3 7 6 1 1 3 2 2 A
The box includes:
» 2 principal support and 2
secondary supports.
» 2 oval shape horizontal bar of
900 mm length.
» 1(2) vertical rods of 930 mm.
» Accessories bag includes: Fixing
screws, screws witch support
the horizontal bars, 1 square
spindle, 1(2) vertical rod guides
and strikes.
» Assembly instructions and
installation template.
» (2 locking points, upper and
lower).
lower.)
» Accessories:Fixing screws, 1
plastic cover for central locking
point, 1 square spindle.
» Assembly instructions and
1010
installation template.
53,5
75
58
38
107
20
29
EMERGENCY EXIT DEVICES
PUSH PAD
The main objective is to permit the The European Norm in force -EN 179-
opening of a door as quickly as possible does not stipulate any particular design,
and in one single movement although this and accepts 2 types of operations: with
requires prior knowledge of this function. lever handle and push-pad.
Examples of emergency devices are
Differentiating from panic devices, the the mortice lock with panic function and
emergency devices are destined to lever handle or Push-Pad devices with
equip exit doors where the persons rim latch.
using them are familiar with the opening
mechanism and where there is a little
risk of a panic situation arising.
3 7 6 1 1 3 2 2 A 3 7 6 1 1 3 2 2 A 3 7 6 1 1 3 2 2 A
30