Professional Documents
Culture Documents
Sự phát triển của kỹ thuật định tuyến có thể được chia thành 5 thế hệ:
Bộ định tuyến thế hệ 1 và 2: chuyển tiếp đơn hoặc nhiều mô-đun, gói
dữ liệu được chuyển tiếp bởi CPU chính. Sản phẩm tiêu biểu: AR18 /
28
Bộ định tuyến thế hệ thứ 3: tách mặt phẳng chuyển tiếp và điều khiển
máy bay. Bộ xử lý chính chịu trách nhiệm kiểm soát và quản lý, bảng
dịch vụ chịu trách nhiệm chuyển tiếp dữ liệu, vẫn dựa trên phần mềm.
Vì vậy, rất khó để nhận ra tốc độ chuyển tiếp cao. Điển hình Sản
phẩm: NE16E / 08E / 05
Bộ định tuyến thế hệ thứ 4: tách mặt phẳng chuyển tiếp và điều khiển
máy bay. Sử dụng chip ASIC để đảm bảo chuyển tiếp tốc độ cao.
Bộ định tuyến thế hệ thứ 5: tách mặt phẳng chuyển tiếp và điều khiển
máy bay. Sử dụng chip NP để đảm bảo chuyển tiếp tốc độ cao. So sánh
với Chip ASIC, chip NP dễ cập nhật hơn.
NE5000E / 80E / 40E là một loại bộ định tuyến thế hệ thứ 5 và sed
rộng rãi trong mạng lưới đương nhiệm.
• Router Bộ định tuyến dịch vụ phổ biến Huawei HUAWEI NetEngine40E (sau
đây gọi là được gọi là NE40E) là một bộ định tuyến cao cấp với giao diện 10 Gbit /
s ,được thiết kế cho các mạng lõi và xương sống. NE40E được định vị là bộ định
tuyến cạnh hoặc hội tụ trên mạng đường trục IP.
• Dựa trên Nền tảng định tuyến đa năng (VRP) mạnh mẽ, NE40E có các tính
năng sau:
• Khả năng định tuyến tuyệt vời: phân phối chuyển tiếp hỗ trợ giao diện chuyển
tiếp tốc độ dòng dày đặc, hỗ trợ đa dạng các giao thức định tuyến như OSPF.IS-
IS.BGP và v.v. Và quy mô của bảng định tuyến lớn hơn 1 triệu.
• Loại dịch vụ phong phú: áp dụng bộ xử lý Mạng tiên tiến; cótính năng dịch vụ
phong phú; và có thể hỗ trợ IPv6, MPLS VPN,Qos, bảo mật và các dịch vụ khác
Confidential Information of Huawei. No Spreading without Permission 1
• Khả năng mở rộng: áp dụng mạng chuyển mạch không chặn và là có thể mở
rộng bằng tầng. Ví dụ: chuyển đổi giao diện công suất của NE5000E là 1,28T, nhưng
công suất của 64 kệ tầng đã có thể đạt tới 80T.
• Độ tin cậy của lớp viễn thông: cung cấp dự phòng cho phần cứng chính
mô-đun, tất cả các mô-đun hỗ trợ chức năng cắm nóng. Khi mà
đơn vị quá trình chính không thành công, sao lưu hợp nhất sẽ hoạt động để
kiểm soát tất cả các dịch vụ được cấu hình trong bộ định tuyến này mà không cần bất
kỳ gói tin nào
thua. Cung cấp chức năng nâng cấp mà không có bất kỳ sự cố dịch vụ nào, và là
có thể thay đổi cấu hình trên mạng một cách an toàn để tránh mạng
gián đoạn và duy trì tính khả dụng của hệ thống 99,999%.
NE40E-X8:
14 U High (1U = 44,45mm)
Kiến trúc phần cứng (khung / bảng nối / hệ thống điện / nhiệt
hệ phân tán); sẵn sàng cho 400 G / khe
NE40E-X16:
32 U High ;
Kiến trúc phần cứng (khung / bảng nối / hệ thống điện / nhiệt hệ phân tán); sẵn sàng
cho400 G / khe
There are five slots in total, including two MPU (two 1:1 backup
MPUs) slots and three LPU slots.
The capacity supported by each slot is 20 Gbit/s and even 40 Gbit/s
after later expansion.
Switching capacity is 240G and user interface capacity is 120G.
The NE40E-X3 is compatible with all LPUs of the NE40E and shares
the software platform with the NE40E.
The MPU is integrated with Stratum-3 clocks and supports the 1588v2
features.
Power supply modules and fan frames support 1+1 backup.
The power module supports DC power of -48 V and AC power of
110/220 V and the power is 1600 W.
CX600 Products Practice Guide
②②
⑥ ⑥
⑦ ⑦
④③
⑧⑧ ⑧⑧
⑤
⑨
HÌnh: Hardware Description of NE40E-X8
The router of the NE40E series adopts a centralized routing engine and
a distributed forwarding architecture. This helps to provide rich and
flexible service and to perform large-capacity forwarding.
The NE40E-X8 adopts an integrated chassis and the main components
all support hot swapping.
The NE40E-X8 supports all the Line Processing Units (LPUs) on the
former NE40E, but the Switch and Route Processing Units (SRUs) and
Switch and Fabric Units (SFUs) are new.
As shown in Figure above, the NE40E-X8 has eight LPU slots . Each
LPU slot supports 40-Gbit/s upstream traffic and 40-Gbit/s
downstream traffic. The switching capacity of the entire system is 1.44
Tbit/s. The capacity of the backplane is 15 Tbit/s. The backplane
reserves 400-Gbit/s bandwidth for the upstream traffic and 400-Gbit/s
bandwidth for the downstream traffic for each LPU slot.
Extensive environment monitoring functions
Alarm detection of the smoke sensor :Supports the connection
to the smoke sensor through the panel to detect the alarm signals
from the chassis or equipment room.
Detection of the ambient temperature :Supports the
connection to the temperature sensor through the panel to detect
the temperature of the chassis or equipment room.
Access control management :Detects whether access control is
enabled through magnetic inspection and reports the inspection
signal to the device. The remote unlocking function is reserved.
You can instruct the CMU to enable or disable access control
through the remote control function.
Device alarm output :The CMU provides two-level alarm
output signals.
Main contact point inspection :The CMU can provide six main
contact points to detect signal input and monitor whether the
devices outside the chassis work normally.
One 232 and 485 serial interface :Provides an RS-232 serial