Professional Documents
Culture Documents
Figure 1
Figure 1
Commands:
Step 1
Rec; enter
Click first point
40,40 ; enter
L ; enter
F8 ; enter
Click the top left corner
Drag the mouse to the right
5; enter
@-5,-5
Drag the mouse down
5; enter
@10,10
5 ; enter
@-15,-15
5; enter
@20,20
5; enter
@-25,-25
5; enter
@30,30
5; enter
@-35,-35
5; enter
@40,40
Step 2
F8; enter
MI; enter
Select the lines inside the rectangle; enter
Click the top right and bottom left corner of the rectangle
Enter
Step 3
DIM; enter
Figure 2
Commands:
Step 1
Rec; enter
Click first point
40,40 ; enter
O; enter
2.5; enter
Offset 7 times
Step 2
L; enter
Click md points ( top, bottom, sides)
O; enter
2.5; enter
Click to the left and right
Click up and down
Step 3
X; enter
Select the object; enter
TR; enter
Select the object; enter
Trim the lines inside the cross
Step 4
DIM; enter
Figure 3
Commands
Step 1
Rec; enter
Click first point
40,40 ; enter
X; enter
O; enter
5, enter
Click the right side of the rectangle
Offset 4 times
Click the top of the rectangle
Offset 7 times; enter
Step 2
TR; enter
Select object; enter
Trim the lines inside the vertical lines
Step 3
DIM; enter
Figure 4
Commands
Step 1
Rec; enter
Click first point
40,40 ; enter
C; enter
Trace the center of the rectangle
Radius: 20; enter
C; enter
Click the end points of rectangle
20; enter
Repeat in all endpoints
Step 2
TR; enter
Select object
Clear the excessive circles
Step 3
DIM; enter
Figure 5
Commands:
Step 1
Rec; enter
Click first point
40,40 ; enter
L; enter
Click the midpoints in top, bottom and sides
O; enter
5; enter
Click the lines inside the rectangle; enter
Step 2
TR; enter
Select the object
Trim the vertical lines in the top left corner and bottom right corner
Trim the horizontal lines in the top right corner and bottom left corner
Enter
Step 3
DIM; enter