Professional Documents
Culture Documents
ETA 13 1036 For HIT-HY 270 Injection Mortar For For Anchoring Application in Masonry Approval Document ASSET DOC 4091439 PDF
ETA 13 1036 For HIT-HY 270 Injection Mortar For For Anchoring Application in Masonry Approval Document ASSET DOC 4091439 PDF
General Part
Trade name of the construction product Injection system Hilti HIT-HY 270
Manufacturer Hilti AG
Feldkircherstraße 100
9494 Schaan
FÜRSTENTUM LIECHTENSTEIN
This European Technical Assessment 45 pages including 3 annexes which form an integral part
contains of this assessment
Electronic copy of the ETA by DIBt: ETA-13/1036
This European Technical Assessment is Guideline for European technical approval of "Metal
issued in accordance with Regulation (EU) Injection Anchors for Use in Masonry", ETAG 029,
No 305/2011, on the basis of April 2013,
used as European Assessment Document (EAD)
according to Article 66 Paragraph 3 of Regulation (EU)
No 305/2011.
Z19220.15 8.06.04-110/15
European Technical Assessment
ETA-13/1036 Page 2 of 45 | 28 April 2015
English translation prepared by DIBt
The European Technical Assessment is issued by the Technical Assessment Body in its official language.
Translations of this European Technical Assessment in other languages shall fully correspond to the
original issued document and shall be identified as such.
Communication of this European Technical Assessment, including transmission by electronic means,
shall be in full. However, partial reproduction may only be made with the written consent of the issuing
Technical Assessment Body. Any partial reproduction has to be identified as such.
This European Technical Assessment may be withdrawn by the issuing Technical Assessment Body, in
particular pursuant to information by the Commission according to Article 25 Paragraph 3 of Regulation
(EU) No 305/2011.
Electronic copy of the ETA by DIBt: ETA-13/1036
Z19220.15 8.06.04-110/15
European Technical Assessment
ETA-13/1036 Page 3 of 45 | 28 April 2015
English translation prepared by DIBt
Specific part
The Injection system Hilti HIT-HY 270 for masonry is a bonded anchor (injection type)
consisting of a mortar foil pack with injection mortar Hilti HIT-HY 270, a perforated sieve sleeve
and an anchor rod with hexagon nut and washer in the range of M6 to M16 or an internal
threaded sleeve in the range of M8 to M12. The steel elements are made of zinc coated steel,
stainless steel or high corrosion resistant steel.
The anchor rod is placed into a drilled hole filled with injection mortar and is anchored via the
bond and/or mechanical interlock between steel element, injection mortar and masonry.
The product description is given in Annex A.
The performances given in Section 3 are only valid if the anchor is used in compliance with the
specifications and conditions given in Annex B.
The verifications and assessment methods on which this European Technical Assessment is
based lead to the assumption of a working life of the anchor of at least 50 years. The indications
given on the working life cannot be interpreted as a guarantee given by the producer, but are to
be regarded only as a means for choosing the right products in relation to the expected
economically reasonable working life of the works.
3 Performance of the product and references to the methods used for its assessment
Z19220.15 8.06.04-110/15
European Technical Assessment
ETA-13/1036 Page 4 of 45 | 28 April 2015
English translation prepared by DIBt
5 Technical details necessary for the implementation of the AVCP system, as provided for
in the applicable European Assessment Document
Technical details necessary for the implementation of the AVCP system are laid down in the
control plan deposited at Deutsches Institut für Bautechnik.
Z19220.15 8.06.04-110/15
Page 5 of European Technical Assessment
ETA-13/1036 of 28 April 2015
Z25869.15 8.06.04-110/15
Page 6 of European Technical Assessment
ETA-13/1036 of 28 April 2015
Z25869.15 8.06.04-110/15
Page 7 of European Technical Assessment
ETA-13/1036 of 28 April 2015
Z25869.15 8.06.04-110/15
Page 8 of European Technical Assessment
ETA-13/1036 of 28 April 2015
Z25869.15 8.06.04-110/15
Page 9 of European Technical Assessment
ETA-13/1036 of 28 April 2015
Z25869.15 8.06.04-110/15
Page 10 of European Technical Assessment
ETA-13/1036 of 28 April 2015
Z25869.15 8.06.04-110/15
Page 11 of European Technical Assessment
ETA-13/1036 of 28 April 2015
Z25869.15 8.06.04-110/15
Page 12 of European Technical Assessment
ETA-13/1036 of 28 April 2015
Z25869.15 8.06.04-110/15
Page 13 of European Technical Assessment
ETA-13/1036 of 28 April 2015
Z25869.15 8.06.04-110/15
Page 14 of European Technical Assessment
ETA-13/1036 of 28 April 2015
Z25869.15 8.06.04-110/15
Page 15 of European Technical Assessment
ETA-13/1036 of 28 April 2015
Z25869.15 8.06.04-110/15
Page 16 of European Technical Assessment
ETA-13/1036 of 28 April 2015
Z25869.15 8.06.04-110/15
Page 17 of European Technical Assessment
ETA-13/1036 of 28 April 2015
Z25869.15 8.06.04-110/15
Page 18 of European Technical Assessment
ETA-13/1036 of 28 April 2015
Z25869.15 8.06.04-110/15
Page 19 of European Technical Assessment
ETA-13/1036 of 28 April 2015
Z25869.15 8.06.04-110/15
Page 20 of European Technical Assessment
ETA-13/1036 of 28 April 2015
Z25869.15 8.06.04-110/15
Page 21 of European Technical Assessment
ETA-13/1036 of 28 April 2015
Z25869.15 8.06.04-110/15
Page 22 of European Technical Assessment
ETA-13/1036 of 28 April 2015
Z25869.15 8.06.04-110/15
Page 23 of European Technical Assessment
ETA-13/1036 of 28 April 2015
Z25869.15 8.06.04-110/15
Page 24 of European Technical Assessment
ETA-13/1036 of 28 April 2015
Z25869.15 8.06.04-110/15
Page 25 of European Technical Assessment
ETA-13/1036 of 28 April 2015
Z25869.15 8.06.04-110/15
Page 26 of European Technical Assessment
ETA-13/1036 of 28 April 2015
Z25869.15 8.06.04-110/15
Page 27 of European Technical Assessment
ETA-13/1036 of 28 April 2015
Z25869.15 8.06.04-110/15
Page 28 of European Technical Assessment
ETA-13/1036 of 28 April 2015
Z25869.15 8.06.04-110/15
Page 29 of European Technical Assessment
ETA-13/1036 of 28 April 2015
Z25869.15 8.06.04-110/15
Page 30 of European Technical Assessment
ETA-13/1036 of 28 April 2015
Z25869.15 8.06.04-110/15
Page 31 of European Technical Assessment
ETA-13/1036 of 28 April 2015
Z25869.15 8.06.04-110/15
Page 32 of European Technical Assessment
ETA-13/1036 of 28 April 2015
Z25869.15 8.06.04-110/15
Page 33 of European Technical Assessment
ETA-13/1036 of 28 April 2015
Z25869.15 8.06.04-110/15
Page 34 of European Technical Assessment
ETA-13/1036 of 28 April 2015
Z25869.15 8.06.04-110/15
Page 35 of European Technical Assessment
ETA-13/1036 of 28 April 2015
Z25869.15 8.06.04-110/15
Page 36 of European Technical Assessment
ETA-13/1036 of 28 April 2015
Z25869.15 8.06.04-110/15
Page 37 of European Technical Assessment
ETA-13/1036 of 28 April 2015
Z25869.15 8.06.04-110/15
Page 38 of European Technical Assessment
ETA-13/1036 of 28 April 2015
Z25869.15 8.06.04-110/15
Page 39 of European Technical Assessment
ETA-13/1036 of 28 April 2015
Z25869.15 8.06.04-110/15
Page 40 of European Technical Assessment
ETA-13/1036 of 28 April 2015
Z25869.15 8.06.04-110/15
Page 41 of European Technical Assessment
ETA-13/1036 of 28 April 2015
Z25869.15 8.06.04-110/15
Page 42 of European Technical Assessment
ETA-13/1036 of 28 April 2015
Z25869.15 8.06.04-110/15
Page 43 of European Technical Assessment
ETA-13/1036 of 28 April 2015
Z25869.15 8.06.04-110/15
Page 44 of European Technical Assessment
ETA-13/1036 of 28 April 2015
Z25869.15 8.06.04-110/15
Page 45 of European Technical Assessment
ETA-13/1036 of 28 April 2015
Z25869.15 8.06.04-110/15