Professional Documents
Culture Documents
Retainer
Standards
PA Socket Recognized E60389
® ® ®
PAF Socket
(IDC style) Retainer PA Connector (Standard type)
mountable type)
®
PAF connector
PAL Connector
● The industryʼs first secure lock ID connectors
PA FAMILY
● Metallic SERIES
strain • Current rating: 3 A AC/DC (AWG #22)
relief /PAF CONNECTOR (Insulation displacement type)
• Voltage rating: 100 V AC/DC
● Retainer with four locking points • Temperature range: -25℃ to +85℃
(including temperature rise in applying electrical current)
• Contact resistance: Initial value/ 15 mΩ max.
PAL connector After environmental tests/ 25 mΩ max.
● The industryʼs first wire to wire 2.0 mm pitch • Insulation resistance: Initial/ 1,000 MΩ min.
retainer mountable type connector. • Withstanding voltage: 800 VAC/minute
• Applicable wire: AWG #28 to #22
● Either with or without panel lock can be • Applicable panel thickness : 0.5 to 2.0 mm
selected according to application.
PA FAMILY SERIES * In using the products,refer to "Handling Precautions for Terminals
and Connectors" described on our website (Technical documents
of Product information page).
* RoHS2 compliance
* Dimensional unit: mm
* Contact JST for details.
1
PA FAMILY SERIES /PA•PAF•PAL CONNECTORS
List of combinations
BE( )B-PASK
BE( )B-PASK-C
Header
High box type
BH( )B-PASK-1
BM( )B-PASS-1
Housing
Retainer
PMS-( )V-S
SPAL-002T-P0.5
Retainer
PALR-( )V(F)
PA FAMILY SERIES
Retainer
PMS-( )V-S
PA FAMILY SERIES
2
PA FAMILY SERIES /PA•PAF•PAL CONNECTORS
PC board layout and Assembly layout
7.2 (5.8)
<Through-hole type>
Top entry type 5.8
(14.7)retainer included
A±0.05 1.5 ±0.05
(14.9)
+0.1
φ1.1 0
9.9
+0.1
φ0.7 0
1.7±0.05
A±0.05 1.5±0.05
(8.4)
2±0.05
(7)
φ1.1+0.1
0
7
2.1±0.05
φ0.7+0.1
0
8.2 8.2 8.2
A±0.05
1.6
1.6
1.6
(14.7)retainer included
2 ±0.05 φ0.7+0.1
(9.9)
0
1.6 -0.1
(5.8)
(14.9)
0
(10.6)
(10.8)
5.5+0.1
0
(5.8)
(7.2) (5.8)
1.5+0.1
0
+0.1
D 0 PA Socket PA Socket PAF Socket
C+0.1
0
(Standard type) (Retainer mountable type) +
+ + PA bottom type header
Note: Dimensions C and D; Refer to PA bottom type header PA bottom type header
the header bottom type.
1.6
1.6
retainer included
4.65-0.1
(9.9)
0
(5.8)
(14.7)
(14.9)
(10.6)
(10.8)
+0.1
0
5.5
(5.8)
+0.1
+0.1
5.5
0
0
(7.2) (5.8)
2.1
+0.1
C 0
PA Socket PA Socket PAF Socket
Note: Dimensions C; Refer to the
header bottom type. (Standard type) (Retainer mountable type) +
+ + PA bottom type header
PA bottom type header PA bottom type header (Extended lenght type)
(Extended lenght type) (Extended lenght type)
Note: 1. The above figure is the figure viewed from the connector mounting side.
2. Tolerances are non-cumulative: ± 0.05 mm for all centers.
3. Hole dimensions differ according to the type of PC board and piercing method. The dimensions above should serve as a guideline. Contact JST for details.
3
PA FAMILY SERIES /PA•PAF•PAL CONNECTORS
PC board layout and Assembly layout
High box type 7.2 7.1
7.1
(20.7)retainer included
A ±0.05
20.9
15.9
1.7 ±0.05
Note: 1. The above figure is the figure viewed from the connector mounting side.
2. Tolerances are non-cumulative: ± 0.05 mm for all centers.
3. H
ole dimensions differ according to the type of PC board and piercing method. The dimensions above should serve as a guideline. Contact JST for details.
<SMT type>
(7.6) (1.4) (6.2) (1.4)
Top entry type
(6.2) (1.4)
1.7 ±0.1
1±0.1 A ±0.1 2.2 ±0.05
(16.0)retainer included
1 min. φ0.8+0.1
0
+0.1
R0.4 0
(16.2)
5 ±0.1 2.9 min.
11.1
4.9 ±0.1
3.6±0.1
0.3
Connector
outline 2 ±0.05 1.45±0.1 1.8±0.1
(6.2)
3.8±0.1 2.8
7.95±0.1
5.7
5.7
5.7
2.7 min. 7.8±0.1
+0.1
R0.4 0
φ0.8 0
+0.1
PA Socket PA Socket PAF Socket
(Standard type) (Retainer mountable type) +
1±0.1 1.7±0.1 1 min. + + PA side entry type header (SMT)
2±0.05 2.2±0.05 PA side entry type header (SMT) PA side entry type header (SMT)
Note: 1 . The above figure is the figure viewed from the connector mounting side.
2. Tolerances for the centers of pattern on PCB is ± 0.05, and shall be not cumulative more than ± 0.1.
3. The dimensions above should serve as a guideline. Contact JST for details.
<Wire-to-wire>
retainer included
(8.9)
(8.4)
(7.6)
4
PA FAMILY SERIES /PA CONNECTOR (Crimp style Standard type)
Contact
Housing
PA FAMILY SERIES /PA•PAF•PAL CONNECTORS
<2 to 9 circuits>
No. of
circuits
Model No.
Dimensions (mm)
A B
Q'ty/
bag
B 2 PAP-02V-S 2.0 6.0 1,000
A (2) 5.8 3 PAP-03V-S 4.0 8.0 1,000
2 4.6 4 PAP-04V-S 6.0 10.0 1,000
5 PAP-05V-S 8.0 12.0 1,000
6 PAP-06V-S 10.0 14.0 1,000
7 PAP-07V-S 12.0 16.0 1,000
7.3
PA FAMILY SERIES B
A (2) 5.8
12
13
PAP-12V-S
PAP-13V-S
22.0
24.0
26.0
28.0
1,000
1,000
Circuit No.1
5
PA FAMILY SERIES
7.7
6.1
5.9
7.7
8.2
5.9
1.2
11.7
3
<10 to 15 circuits>
Circuit
<10 to 15 circuits> PA FAMILY SERIES
B No.1 5.3 B 6.5 (3.4)
A A
7.7
6.1
5.9
7.7
8.2
1.2
5.9
11.7
3
<16 circuits>
B
Circuit
No.1
PA FAMILY SERIES /PA•PAF•PAL CONNECTORS
<16 circuits>
5.3
B 6.5 (3.4)
A
A
7.7
5.9
6.1
1.2
7.7
8.2
5.9
11.7
3
6
PA FAMILY SERIES
PA FAMILY SERIES
14 B14B-PASK-N B14B-PASK-1N 26.0 30.0 250
15 B15B-PASK-N B15B-PASK-1N 28.0 32.0 250
16 B16B-PASK-N B16B-PASK-1N 30.0 34.0 250
7.7
5.9
1.2
5.9
1.2
Bottom type
Bottom type
<5, 8 circuits>
Circuit No. of Dimensions (mm) Q'ty/
B No.1 Model No.
circuits A B C D bag
A 9
5 BE05B-PASK 8.0 12.0 12.4 5.5 300
2 5.3 0.5 8 BE08B-PASK 14.0 18.0 18.4 5.5 200
11 BE11B-PASK 20.0 24.0 24.4 12.0 150
12 BE12B-PASK 22.0 26.0 26.4 12.0 150
7.7
(2.5) 3
5.9
Note: 1. Dimemsions C; Refer to the PCB layout bottom type (page 3).
2. Not UL approved.
7
PA FAMILY SERIES
13.9
13.9
3
3
Circuit No.1
Circuit No.1
<3 circuits>
PA FAMILY SERIES /PA CONNECTOR (Crimp style Retainer mountable type)
B 7.1
<7 to 9 circuits>
B
7.1
A
A
2 5.3 2 5.3
13.9
13.9
3
3
Circuit No.1 Circuit No.1
13.9
3
8
PA FAMILY SERIES B
A 5.7
1.8
SMT type shrouded header
7.1
Top entry type Side entry type
Circuit No.1
<2 to 3 circuits> <2 to 3 circuits>
B B
A AB
2 5.7 A2 5.7
2 5.7
1.8
1.8
1.8
7.1
7.1
7.1
Circuit No.1 Circuit No.1
Circuit No.1
<4 to 9 circuits> <4 to 9 circuits> B
B AB
A
A 2 5.7
2 5.7
2 5.7
1.8
1.8
1.8
7.1
7.1
7.1
Circuit No.1
Circuit No.1 Circuit No.1
1.8
1.8
7.1
7.1
Post: Copper alloy, copper-undercoated, tin-plated (reflow treatment) Post: Copper alloy, copper-undercoated, tin-plated (reflow treatment)
Wafer: PA, UL94V-0, natural (ivory) Wafer: PA, UL94V-0, natural (ivory)
Solder tab: Copper alloy, copper-undercoated, tin-plated (reflow treatment) Solder tab: Copper alloy, copper-undercoated, tin-plated (reflow treatment)
RoHS2 compliance This product displays (LF)(SN) on a label. RoHS2 compliance This product displays (LF)(SN) on a label.
Note: (*): T
F...taping product Note: (*): TB...taping product
TFT...taping product with suction tape. TBT...taping product with suction tape.
9
PA FAMILY SERIES /PA CONNECTOR (Crimp style Retainer mountable type)
Contact
Applicable wire Insulation O.D. Q'ty/
Model No.
mm2 AWG # (mm) reel
SPA-001T-P0.5 0.13~0.33 26~22 0.9~1.5 10,000
1.5
Material and Finish
Crimping Applicator
Contact
machine Crimp applicator Dies Crimp applicator with dies
2.2
Housing
<2 circuits> <3 circuits> No. of Dimensions (mm) Q'ty/
Model No.
B B circuits A B bag
A 7.2 A 7.2 2 PARP-02V 2.0 5.4 1,000
2
3 PARP-03V 4.0 7.4 1,000
4 PARP-04V 6.0 9.4 1,000
5 PARP-05V 8.0 11.4 1,000
11.4
11.4
(blank)...natural (white)
R...red E...blue M...green Y...yellow
Circuit No.1 Circuit No.1
Retainer
No. of Dimensions (mm) Q'ty/
Model No.
<2 to 5 circuits> <6 to 13,15 circuits> circuits A B bag
2 PMS-02V-S 2.0 7.3 1,000
3 PMS-03V-S 4.0 9.3 1,000
4 PMS-04V-S 6.0 11.3 1,000
2
B
A
7
11 PMS-11V-S 20.0 21.55 1,000
3.1
12 PMS-12V-S 22.0 23.55 1,000
2.85 1.5
13 PMS-13V-S 24.0 25.55 1,000
7
15 PMS-15V-S 28.0 29.55 1,000
RoHS2 compliance
10
PA FAMILY SERIES /PAF CONNECTOR (Insulation displacement type)
Receptacle
No. of Dimensions (mm) Q'ty/
Model No.
circuits A B box
2 02PAF-6S 2.0 6.0 1,000
3 03PAF-6S 4.0 8.0 1,000
PA FAMILY SERIES 4
5
04PAF-6S
05PAF-6S
6.0
8.0
10.0
12.0
500
500
6 06PAF-6S 10.0 14.0 500
7 07PAF-6S 12.0 16.0 500
B
8 08PAF-6S 14.0 18.0 250
A 2 13
9 09PAF-6S 16.0 20.0 250
2
10 10PAF-6S 18.0 22.0 250
11 11PAF-6S 20.0 24.0 250
12 12PAF-6S 22.0 26.0 250
3.1
5.1
RoHS2 compliance
Note*: Unlisted in UL.
<For reference> As the color identification,
the following alphabet shall be put in the underlined part.
For availability, delivery and minimum order quantity, contact JST.
ex. 02PAF-6S-
S...natural (white)
PA FAMILY SERIES R...red E...blue M...green Y...yellow
Retainer
No. of Dimensions (mm) Q'ty/
Model No.
circuits A B bag
2 PAFS-02V-S 2.0 7.4 1,000
3 PAFS-03V-S 4.0 9.4 1,000
4 PAFS-04V-S 6.0 11.4 1,000
5 PAFS-05V-S 8.0 13.4 1,000
6 PAFS-06V-S 10.0 15.4 1,000
7 PAFS-07V-S 12.0 17.4 1,000
2
RoHS2 compliance
Note*: Unlisted in UL.
11
PA FAMILY SERIES /PAL CONNECTOR (Wire-to-wire type)
Contact
Applicable wire Insulation O.D. Q'ty/
Model No.
mm2 AWG # (mm) reel
SPAL-001T-P0.5 0.13~0.33 26~22 1.0~1.5 10,000
SPAL-002T-P0.5 0.08~0.21 28~24 0.9~1.5 10,000
PA FAMILY SERIES
1.6
0.5
12.8
RoHS2 compliance
2.85
1.3
Crimping Applicator
Contact
machine Crimp applicator Dies Crimp applicator with dies
0.5
PA FAMILY SERIES /PA•PAF•PAL CONNECTORS Note: Contact JST for fully automatic crimping applicator.
Housing
No. of Dimensions (mm) Q'ty/
Without panel locks Model No.
circuits A B bag
<2 to 5 circuits> <6 to 8 circuits> 2 PALR-02VF 2.0 9.4 1,000
B 6.3 B 6.3 3 PALR-03VF 4.0 11.4 1,000
A 3.7 3.4 A 3.7 3.4 4 PALR-04VF 6.0 13.4 1,000
2 2 5 PALR-05VF 8.0 15.4 1,000
RoHS2 compliance
Circuit No.1 4.7 Circuit No.1 4.4
D±0.1
Material and Finish
4
RoHS2 compliance
<6 to 8 circuits>
<For reference> As the color identification,
B 3.2 6.3
the following alphabet shall be put in the underlined part.
A 3.7 3.4
For availability, delivery and minimum order quantity, contact JST.
2 Panel layout ex. PALR-02V(F)-oo-
(blank)...natural (white)
5.1±0.05
C+0.1
0
D±0.1
5.8
Retainer
Retainers are interchangeable with those of the PA crimp style retainer mountable type.
12