Professional Documents
Culture Documents
DS16 041 00
DS16 041 00
DHE SENSOR
O 030 350 000 353
DS16-041
Electrical Mechanical
• Supply voltage 9 to 15V unregulated1 • See attached drawing No. D100 350 000 295
• Supply current 5 to 15mA • Air gap 1.5mm maximum
• Open collector output • Body diameter 9mm
• Output current 35mA maximum • Weight less than 50g
• Frequency response 15Hz to 20kHz • Polyester cable boss for strain relief to sensor body
• Reverse polarity protection • O-ring Ø9.25 x 1.78mm supplied with sensor
• Output, when referring to the target wheel of
recommended geometry, direction and sensor
orientation shown on the outline drawing, will FALL Environmental
at a point past the centre of a gap and RISE at a
point past the centre of a tooth. • Vibration 50 to 2500Hz @ 40g 8hrs per axis
• Resistant to standard motorsport fluids
Cable and Connection Definition • Maximum humidity 100%
• Operating temperature -10 to 175°C2
• 24AWG un-screened cable • Aluminium alloy body, hard anodised and dyed
• Cable length 1500mm black
• Connection • Viton jacketed cable (200°C)
Red wire Supply
Green wire Signal
White wire Ground
1Supply voltage 9 to 24V if operating temperature 2 Functional life of no less than 1000hrs at 155°C, this
<140°C, for higher operating temperatures will de-rate further as the temperature increases
maximum supply voltage should be reduced to
minimise self heating.