7.1.1 Scope of Specification This specification covers the scope of work of structural steel works, submittals by the Contractor, applicable codes of practice for structural steel work and the specifications for the materials to be used, including steel, bolts & nuts, washers etc and the storage thereof. These specifications shall be read in conjunction with the CPWD specifications 1996 / 2002, MORTH Specifications and other relevant reference specifications described in the section 1.1 of these specifications. 7.1.2 Scope of Work The scope of work for the contractor in respect of structural steel work shall cover, but shall not be limited to the following: (a) Preparation of complete detailed fabrication drawings and erection marking drawing based on the design drawings, required for all the permanent and temporary structures (b) Submittal of revised design, with calculations and detailed fabrication drawings, in case any substitution of the designed sections is required. (c) Submittal of design calculations for joints and connections to be developed by the contractor along with detailed fabrication drawings. (d) Supply of all raw steel materials for fabrication, taking into account wastage margin, including storage and upkeep of the materials. (e) Furnishing of all materials, labour, tools and plant and all consumable required for fabrication and supply of all necessary bolts, nuts, washers, tie roads and welding electrodes for field connections, with necessary wastage margins. (f) Fabrication of the steel works in accordance with the approved fabrication drawings, including all shop assembling, matching and marking. Design, manufacture / fabrication and provision of all jigs, fixings, manipulators etc. required for the fabrication. (g) Provision of shop painting and requisite site painting to all fabricated steelwork, as per requirements of the related specification of the painting. (h) Suitability marking, bundling and packing for transport of all fabricated materials. (i) Preparing and furnishing detailed bill of materials, drawing Office dispatch lists, Bolts Lists and any other lists of bought out items required in connection with the fabrication and erection of the structural steelwork. (j) Loading, Transportation and unloading of all fabricated structural steel materials from site storage yard to erection site , handling, assembling, bolting, welding and satisfactory