Phone/Fax: 0263-234312
Web: www.belak.ro-
BETAK Ema: beak@beth 0
Industriei Str. 4, 420063 - Bistrita
Canuck
‘TOV: Quaitty; Environment; Occupational Health
Pesta oes
Se ened
hat dip galvanized steel stip, according to
Cie uker a)
ede
checking of adherence according to SR EN 50164-2/2009
zinc layer Z 600 and Z 300 according tothe customer
request
SE ee TPC
Dial sd coma ar
PE eet tra eect)
‘SR EN 10025-2/2004; SR EN 10111/2008
‘tolerance of sizes according to SR EN 10051 +A1/2000
~ calls weight: 60 kg, as per customer request
packs of 1 toalle, as per customer request
re
os TECHNICAL CRITERIONS sv
»BAZIT™ hot dip galvanized steel strip
2.500 = minim 70 microns or Z 300 = minim 42 microns
Lenght Weight
Sizes _Keltml (mp approx, (kg) = 1 ke
Moxa 130) 80
oxi | 078) 67 0
Sx [2.0038 x
aos | 16030 so
soxt 16030 so
Boxt | 00S 50
2x4 0806 30
403100) SI 50
2530608 50
Dox) 0501008
3x2) 047 | 10730
2203215680sesedtat pants
®G@ICECON CERT ccsnmcanoncoy
SSREN 480112001
‘CERTIFICAT DE ACREDITARE
‘a FROWN
CERTIFICATE OF CONFORMITY
0367-P/06.06.2014
This certificate of conformity is certify that product
HOT DIP GALVANIZED STEEL STRIP - BAZIT
(Lightning protection component ~ steel conductor type),
Placed on the market and manufactured in the factory by SC BETAK SA,
Head office and plant adress:
BISTRITA City, Industriei street, no. 4, jud. BISTRITA-NASAUD County,
Phone: 0263 234 312, fax: 0263 234 278
has been subjected by the manufacturer to initial type testing and production process
control including all measures necessary for fulfilment the maintenance
and the requirements specified in the reference standard.
ICECON CERT has performed initial inspection of the production process and quality
system, has assessed testing reports and will perform the continuous surveillance
of the production process, the quality system and the product by performing tests on
‘samples taken at the factory
This certificate attests that all requirements relating to conformity assessment
of the product, as are described in the reference standard
EN 62561-2:2012 (SR EN 62561-2:2013)
have been accomplished.
Applicable conformity system: 5, according to ISO/CEt Guide 67:2004.
This certificate has been first issued on 6" June 2014 and remains valid unti
5" June 2017, as iong as the praduct continues to comply with the requirements specified
in the reference standard
Intended use: installation of a lightning protection system.
Bucharest, 6" June 2014TUV SUD Industrie Service GmbH
CERTIFICATE
Conformity of the Factory Production Control
0036-CPR-1090-1.00141.TUV SUD.2014.001
In compliance with Regulation 305/2011/EU of the
European Parliament and of the Council of 9 March 2011 (the Construction Products
Regulation or CPR), this certificate applies tothe following construction product
Construction product Structural components and kits for steel structures
to EXC3 according to EN 1090-2
Intended use for load-bearing structures in all types of buildings
CE - marking method ZA.3.2 and ZA.34 acc. to EN 1090-1:2009+A1:2011
Range of production see reverse
produced by or for
=
Ps
°
Ss
=
=
ra
=)
bd
°
=
4
=)
a
-
i
wi
=
b 2
&
es
<
=
&
=
e
rs
rr
°o
. 4
‘i
ey
Manufacturer S.C, BETAK S.A,
Industrie’ nr.
420063 Bistrita
ROMANIA
Manufacturing plant S.C. BETAK S.A
vost etiam fain
420063 Bistrita
ROMANIA
Confirmation This certificate attests that all provisions concerning the
assessment and verification af constancy of performance
described in Annex ZA of the harmonised standard
i EN 1090-1:2009+-a1:2011
ict under system 2+ are applied, and that the factory
2 production control fulfils all the prescribed requirements,
Hs Stated therein
PS) start of valiity 23.07.2014
Pay) Next
= ee 23.07.2015
PEP) Period of v This certificate will remain vali as long as the test methods
= andlor the factory production control requirements included
z inthe harmonised standard used to assess the performance of the
= declared characteristics do not change, and the product and the
rs ‘manufacturing conditions in the plant are not modified significantly.
a
FEY) Remarks see reverse
Place and date of issue Munich, 30.07.2014
¢ 0. Vaida/CR
pH
ey (( Dakks
= a
Fa Sntinest
r=
pr
cx
‘TUVSUO Incusa Serica Gb - Abtalung Werestal-und Schwere -Certificate number: 0036-CPR-1090-1.00141.TUV SUD.2014.001
Range of production ¥ production (welding, mechanically connecting, corrosion protection)
Associated ‘TOV sUD-00141.2014.001
Welding certificates
Remarks ‘The Notified Body - 0036 TUV SUD Industrie Service GmbH has performed the
initial inspection of thefof manufacturing plant(s) and of the factory production
control and performs the continuous surveillance, assessment and approval of
the factory production control
‘This certificate remains valid during the aforementioned period and as long as
the conditions lay down in the above mentioned technical specifications in
reference or the manufacturing conditions in the factory itself are not modified
significantly.
Upon successful completion of the next continuous surveillanc
certificate will be issued,
anew
General provisions
“The regulations as addressed inthe below listed documents in ther respective relevant version shall
apply:
8) General Terms and Conditions of Business of TUV SUD Industrie Service GmbH
Testing and Certification Regulations of TU SUD Group
) Certification Contract between TOY SUD Industrie Service GmbH and the customer (manufacturer) as
named inthe certificate
d
VS Guideline 1711 of the German Society of Welding (the guideline shall generally apply except Annex
8)
General provsions/ conditions for validity of Factory Production Control Certificates according to EN
1090-1 and ofthe associated Welding Certificates (Request of Certification, Annex 1 of Doc.-No.
(9ssPuz0005/4T)