Professional Documents
Culture Documents
Price For Charcoal Kilns 2019 - Sep.17 Fheorghita
Price For Charcoal Kilns 2019 - Sep.17 Fheorghita
In this price we’d like to represent 3 main types of our charcoal kilns
Also it’s possible to burn all kinds of fuel briquettes such as "Pini Key" and "Nestro" into charcoal briquettes
The productivity of the briquette is 100-120 tons / month
1. Increased productivity 36-50 tons per moth for charcoal and 100-120 tons per month per briquettes
3. The high quantitative and qualitative characteristics of charcoal and briquette. The ratio of wood to
charcoal is 5.1m3 per 1 ton of charcoal
4. Low operating costs. The equipment serves one person whether it is a single installation, two or three.
6. Quick and easy unloading of finished products and loading of raw materials in the retort - up to 5
minutes
8. Work without repairs. We give a guarantee for two years. Minimum terms for work without repair - 5
years
10. Extended range of plug-ins for the selection of excess heat - a wood drying, hot water boilers, waste
incineration.
11. Low cost of equipment. Taking into account the calculation of the cost of a ton of charcoal produced per
year, the price of charcoal kiln is the lowest in the world market.
Parameters
The main difference between "UMT 3 PLUS EcoTeploOtbor" from other UMT models is
the presence of a boiler for burning pyrolysis gas, with a capacity of 400-600 kW.
the ratio of wood to charcoal is 4.7 / 1. This means that 4.7 m3 of hard wood = 1 ton of high quality charcoal.
This indicator does not give any one of the famous charcoal kilns.
no emissions to the atmosphere. High environmental safety allows to arrange this charcoal kiln anywhere.
Parameters
Width -depth –height 3760x1780x2100 mm (without chimneys)
Diameter of the retorts 1200 mm
Weight 4000 kg
Productivity till 20 tons per month
Guarantee – 24 months
Terms of manufacturing – 21 workdays
Price on terms FCA Kostopol, Ukraine –
Parameters
Width -depth –height 3760x1780x2100 mm (without chimney-stacks and boiler)
Diameter of the retorts 1200 mm
Boiler – 170 l, Boiler power -200 kW
Weight 4400 kg
Productivity 16-20 tons per month
Guarantee – 24 months , Terms of manufacturing – 30 workdays
Price on terms FCA Kostopol, Ukraine
What is the difference between setting a feed screw conveyor and the belt conveyor ?
Screw Conveyor
When fed with a screw conveyor there is no need to chop the charcoal to the required fraction, this makes the
auger. Also the screening (fraction less than 20 mm) is selected on the way from the loading to the packing unit.
Belt conveyer
There is no crushing of charcoal to the fraction of the right size by mechanical means.
ADDITIONAL OPTIONS :
Set of 6 baskets for "UMT-3" for firing finely fraction of raw materials – 1 099 $
Automatic protection against critical temperatures on the UMT "Farmer Standard Plus" -2 200 $
• Travel to the place of installation and back, accommodation, meals of the Contractor's employees at the
Customer's site
Vladislav Chernov
General Director