Professional Documents
Culture Documents
Lmu5 en 0275
Lmu5 en 0275
& I N F O R M AT I O N
LMU 5000
Coupling Device
Based on a new design, the LMU 5000 is a part of the 5000 Telecom product
range and offers the following features:
Customer Benefits • Efficient protection against HV power effect and transient voltage picks,
ensuring a high level of safety for staff and excellent protection for the
• High safety levels power line carrier equipment.
• Compliant with all • Designed to provide a fast and efficient commissioning
PLC transmissions • Matching characteristics that cope with all the impedances between a
• Easy to install and PLC equipment and the power line / coupling capacitor circuit.
configure
• Cost effective solution
• Allows a wide range
of applications
• Extended temperature
range
T&D
FEATURES ADDITIONAL FEATURES (OPTIONS)
The LMU 5000 is designed to operate with many Phase to phase coupling is carried ou by means of one
different sizes of R.F coaxial cables and with all Hybrid transformer.
different sections of copper bar.
ATTENUATION DEVICE
OUTSTANDING PROTECTION LEVEL
An additional (optional) attenuator is available for short
> Coupling capacitor terminal. lines with low R.F attenuation. It provides an efficient
solution against line reflections and resulting
The connection is protected against any
impedance distortions, based on extensive knowledge
unwanted contact (personnel protection).
and detailed analysis capability
LMU
5000
PLC
System
Line 1
LMU LMU
5000 5000 Line 2
PLC
System Line-trap Coupling
capacitor
LMU LMU
5000 5000
PLC
System
2>3
> Matching & Tuning PROTECTION CHARACTERISTICS
• Nominal Impedance
• Line side > Grounding switch
- impedance 50 Ω to 800 Ω • Short-circuit Current: 200A/permanent
- mode unbalanced
Phase to ground
• PLC Side > Primary Arrester
- impedance 50, 75, 125, 150 Ω • D.C. Spark-over voltage 1kV ±20%
- mode balanced
• Impulse Spark-over voltage (1.2/50 µs)
unbalanced
<2kV
• A.C. discharge current (50 Hz, 1s, 10 times)
> Attenuator option ≤ 20A
• Attenuation 6 dB • Impulse discharge current (8/20 µs): 20kA
• Impedance 50, 75, 125, 150 Ω • Nominal current after striking 30A / 1s
100A / 200ms
• Insulation resistance ≤ 1010 Ω
ENVIRONMENTAL CHARACTERISTICS
at 100V
MECHANICAL CHARACTERISTICS
• Coupling Capacitor
• Connection: bolt and metric threading (M8)
• Cable: Insulated Cable or copper bar.
• Section: 16 mm2 to 25 mm2
• Grounding
• Bolt for Cu cable up to 75 mm2
• Connection: bolt and metric threading (M10)
• Cable: Copper naked cable
• Section of cable: 50 mm2 to 95 mm2
Physical
MiCOM is a registered trademerk of AREVA. The other names mentioned, registered or not, are the property of their respective companies. - 389191982 RCS PARIS - SONOVISION-ITEP.
THE NEW INTERFACE
LMU 5000 at a glance
• In the constantly evolving world of power line
>> High safety level
technology, LMU 5000 represents a new
EAI-L3-LMU5000-BR-03.04-0275-GB - ©2004 AREVA . AREVA, the AREVA logo and any alternative version thereof are trademarks and service marks of AREVA.
>> High protection level generation for securing telecom networks.