Professional Documents
Culture Documents
Flooring 120124104103 Phpapp01
Flooring 120124104103 Phpapp01
SCREEDS
SELF LEVELLING
Screeds
ARDEX
‘RAPIDRY FORMULA’ CEMENT SYSTEMS
ARDEX
‘RAPIDRY FORMULA’ CEMENT SYSTEMS
This means rapid hardening and drying regardless of thickness for commercial and
industrial flooring systems
This means elimination of the risk of water discoloration, staining and efflorences when
fixing natural stone
Surface laitance on concrete
Appearance on Site
Result of background shrinkage after fixing floor tiles
Moisture from substrate reacts with minerals in the stone
Permanent moisture staining from screed
Permanent Staining from moisture in screed
Reasons for the Discolouration of Natural Stone
D. Moisture from the substrate (screed, concrete or adhesive), the grouting compound and plasticiser in
the silicone will discolour edge areas, known as `picture framing`
E. Calcium hydroxide in the mortar bed is deposited on the surface and becomes
calcium carbonate (known as lime bloom or efflorescence)
This means rapid hardening and drying regardless of thickness for commercial and
industrial flooring systems
This means elimination of the risk of water discoloration, staining and efflorences when
fixing natural stone
Screed cement
• A37
• A38
Screed cement
A37
Rapid hardening and drying cement for floor screeds
• Rapid hardening –
walk able in 3-4 hours
Squeeze
ball test
Slurry bonding of ARDEX A 37
A37 – Bonded
Unbonded screed
minimum 45mm thick
Wet screed on polyethylene sheet
Vertical screed edge
Screeds with Perimeter Strips
either so....
E-27
Screeds with Perimeter Strips
or so....!
E-28
STITCHING JOINT
E-29
Toppings (Wearing screeds)
Overtake any joint from the substrate into the screed as well as top floor!
BRE
Screed
Tester in
action
Screed Soundness In Situ Crushing
Resistance Tester
Template
Gauge
Smoothing/Self levelling
• CL 11
• K15
• K80
• K301
P 82
Priming and bonding agent
• Improves Adhesion
• Inhibit Penetration of water
• Used as pore sealer on floor surfaces to prevent air bubbles rising
through the sub floor smoothing compound
• Mixed with water to prepare internal surfaces to receive Cement – based
levelling compounds, adhesive,screeds as well as plaster material
• To prolong flow life and workability
PRIMING EQUIPMENT SET UP
MIXING STATION SET UP
Water Butt
Hose Pipe
Calibration bucket
Gauging trowel in use
K15 APPLICATION
K15 Before and after
Old
smoothing
compound
K 15
CL 11
Commercial Levelling Compound
• Cement based
• Can be applied from 2mm to10mm
• Walk able after 3hrs and ready to receive floor covering within 48 hrs
• Durable – Excellent surface Hardness
• Produces Flat and absorbent surfaces for the subsequent laying of all
kind of flooring products
• Used in internal sub floor such as concrete, cement/sand screed, quarry
tiles etc.
• Generally P51 primer is mandatory especially on absorbent sub – floor
• Coverage approx. 1.5kg/m2/mm i.e 25kg bag /5.55m2/3mm thick
• Compressive strength : 5/20/26 N/mm2 at 1/7/28 days respectively
K15
Self levelling Sub- floor Smoothing Compound
• Rapid hardening
• Rapid Drying – receives floor coverings within 24 hrs regardless of thickness
• Fast track – Install in the evening and reopen for business next day
• Can be applied by trowel or pump
• Strong – with stands heavy wheeled traffic and has excellent abrasion
resistance(Industrial)
• Can receive a range of surface finishes including epoxy paints, resin coating
• Rapidry Formula – It is the ability of the mortar to totally bind the water used for
mixing
• Prime with R3E with sand blinding or P51 in 1:2 ratio
• Used in internal sub floor such as concrete up to 5mm to 50mm.
• Coverage approx. 1.65kg/m2/mm i.e. 25kg bag /3m2/5mm thick
• Compressive strength : 14/20/32 N/mm2 at 1/7/28 days respectively
K301
Exterior Self-smoothing levelling and Resurfacing compound
CL11 Internal - For levels and smooth 26 N/mm2 6 N/mm2 65 N/mm2 3 hours at 3mm
uneven internal sub floor prior to thickness
floor covers – 2-10mm thick
K 15 Internal sub-floors of concrete, 28.8 N/mm2 7 N/mm2 73N/mm2 2 hours for walking and
cement/sand, quarry tiles, etc., prior 24 hours for floor
to the installation of floor coverings. covers
K 80 Internal - Compound for resurfacing 32 N/mm2 9 N/mm2 90 N/mm2 2 hours for walking and
and leveling existing concrete floors 24 hours for floor
to give a hard, smooth, flat, wearing coatings
surface or as a base for suitable paint
and resin coatings. 5-50mm thick
K 301 External - For smooth and level the 28 N/mm2 6.5 N/mm2 65 N/mm2 2 hours for walking and
concrete surfaces such as balconies, 2, 5 , 7 days for over
domestic driveways, garages, coat of 5, 10 & 20mm
walkways etc exposed to normal foot thick respectively
and rubber wheeled traffic. 2-20mm
thick
CPS – Car Park System
CPS – Car Park System
CPS – Car Park System
CPS – Car Park System
CPS – Car Park System
CPS – Car Park System
CPS – Car Park System
HIGH PERFORMANCE
INDUSTRIAL FLOORING PRODUCTS
Ardex Industrial Flooring System
DRINKS PRODUCTION
PUBLIC AREAS
MEAT PROCCESSING
R3E
Priming and bonding agent
Aggregate blinding to
provide key,
approximately 1kg/m2