Department of Electronics and Communication Engineering
III ECE Microprocessors and Microcontrollers- Quiz for PCE
1.The 8259-A is a _________
A. piority Interrupt Controller B. priority Resolver C. interrupt Request Registry D. control Logic ANSWER: A
2. The 8259A is used to manage _______ hardware in the system
A. Single B. Multiple C. Double D. none ANSWER: B
3.8255A contains_________ ports each of 8 bit lines.
A. 2 B. 4 C. 5 D. 3 ANSWER: D
4. In 8255A the ____ is controlled by control registers.
A. port A B. port B C. port C D. port D ANSWER: C
5.In 8255A __________ is used for input operation
A. mode 0. B. mode2 C. mode 3 D. mode1 ANSWER: A
6. In 8255A _________ is used for handshaking operation
A. mode 0 B. mode1 C. mode 2 D. mode3 ANSWER: B 7. In 8255 A ___________ is used to perform bidirectional operation A. mode 0 B. mode1 C. mode 2 D. mode3 ANSWER: C
8.Data transfer between the microprocessor for peripheral takes place through __________ A. i/o port B. input port C. output port D. multi port ANSWER: A
9.In 8255A, there are _________ I/o lines
A. 24 B. 12 C. 20 D. 10 ANSWER: A
10. __________ is useful for the generation of accurate time delay