Professional Documents
Culture Documents
Imphal, Manipur-795140
CNS
Communication, navigation and surveillance
Submitted By:-
1|Page
Contents
1. Acknowledgement.
2. Training Faculty
3. Functions of AAI
5. VHF Communication.
6. DVR
7. VCR
8. DATIS
10. DME
11. DVR
13. RADAR.
14. CCTV
16. Conclusion
17. Reference
2|Page
Acknowledgement
Acknowledgement is something which really comes from the
bottom of the heart of every writer .We are obliged to staff
members at AAI of TULHAL airport, for the valuable
information provided by them in their respective fields. We
are grateful for their cooperation during the period of our
assignment.
3|Page
Training Faculty
1.Ashish Shrivastava
2. S.Nandhulal
3. Kh.Siddhartha
4. Ajay Sangwan
5. T.Mankhothang
6. Shibina
7. Parthasarthi
8. Jhon Singh
9. Smita
4|Page
Functions of AAI
5|Page
Communication-Navigation-Surveillance
(CNS)
-------------------------------------------------------------------
Communication is the exchange of voice and data
information between the pilot and air traffic
controllers or flight information centres.
6|Page
VHF-Communication
7|Page
TRANSMITTER:-
1. A transmitter uses an oscillator to produce the desired
radio frequency current.
2. In electronics and telecommunications a transmitter or
radio transmitter is an electronic device which generates
a radio frequency alternating current. When a connected
antenna is excited by this alternating current, the
antenna emits radio waves.
8|Page
amplitude often called the carrier wave, because it serves to
"carry" the information through space. In most modern
transmitters this is a crystal oscillator in which the frequency is
precisely controlled by the vibrations of a quartz crystal.
9|Page
RADIO-RECEIVER (VHF)
In radio communications, a radio receiver (commonly also
called a radio) is an electronic device that receives radio
waves and converts the information carried by them to a usable
form. It is used with an antenna. The antenna intercepts radio
waves (electromagnetic waves) and converts them to
tiny alternating currents which are applied to the receiver, and
the receiver extracts the desired information. The receiver
uses electronic filters to separate the desired radio
frequency signal from all the other signals picked up by the
antenna, an electronic amplifier to increase the power of the
signal for further processing, and finally recovers the desired
information through demodulation.
The information produced by the receiver may be in the form of
sound (an audio signal), images (a video signal) or digital data.
[1]
A radio receiver may be a separate piece of electronic
equipment, or an electronic circuit within another device.
Devices that contain radio receivers include television
sets, radar equipment, two-way radios, cell phones, wireless
computer networks, GPS navigation devices, satellite
dishes, radio telescopes, bluetooth enabled devices, garage
door openers, and baby monitors.
In consumer electronics, the terms radio and radio receiver are
often used specifically for receivers designed to reproduce
the audio (sound) signals transmitted by radio
broadcasting stations, historically the first mass-
market commercial radio application.
10 | P a g e
Block diagram of receiver :
Super-heterodyne
12 | P a g e
DVR RACK
13 | P a g e
Voice Communications System (VCS)
Key features
VoIP
Colour touch-screen Control Panel
Set of audio accessories and PTTs
Easiest way to upgrade your current system or add
a failback equipment
Modularity & scalability & robustness
Easy to integrate with other equipment
Multiple GUIs library to select from
Fail proof & zero maintenance
Intuitive configurator
Compatible with common as well as VoIP radios
14 | P a g e
Special support for usage in simulators: GUI
replicas library, communications in the background,
library of VCS configurations.
Key benefits
15 | P a g e
16 | P a g e
Basic Block Diagram of VCS System
17 | P a g e
1.Voice Communication System is a switching system that
connects various air traffic controllers’ positions to various
air-to-ground and ground-to-ground communication systems.
2.Voice switching and routing between (A-to-G and G-to-G)
communication systems and air traffic controllers’ working
positions is done by using advanced microprocessor and
DSPs.
18 | P a g e
Used as operational equipment as well as in ATC
simulators
Can work fully automatically
Consists of a server with one or more working
positions for operator to prepare, check and dispatch
messages for broadcasting based on manual or
automated inputs
Sends a VoIP message to receivers with VoIP
interface, or analog audio to receivers with analog input
as well as to an output for voice recorder
Weather information is entered manually or
automatically from connected source of data
Includes an internal GPS based Time Reference
System or can be synchronised by external NTP
Linux based, industrial hardware
Speaker independent, no mike, no recordings
required
Near to zero maintenance
Temperature 19 °C
20 | P a g e
Dew Point 13 °C
21 | P a g e
Block diagram of D-ATIS
1.VAU(Voice Announcement Unit)
2.KVM switch
3.Server
22 | P a g e
AMSS
(AUTOMATIC MESSAGE SWITCHING SYSTEM)
AFTN IN INDIA
AFTN (Aeronautical Fixed Telecommunication
Network) in India is under the control of Airports
Authority of India. The AAI has established AMSS
centers throughout the country in major stations. India
plays a key role in the international AFTN, bridging the
gap between the eastern and western parts of the
world. Messages originating in the western countries
are routed through India to the eastern countries and
vice-versa.
AFTN SWITCHING SYSTEM
In AFTN, information is exchanged between many stations.
The simplest form of communication is point-to-point type,
where information is transmitted from a source to sink
through a medium. The source is where information is
generated and includes all functions necessary to translate
the information into an agreed code, format and procedure.
The medium could be a pair of wires, radio systems etc. is
responsible for transferring the information. The sink is
defined as the recipient of information; it includes all
necessary elements to decode the signals back into
information.
23 | P a g e
• CLASSIFICATION OF AFTN SWITCHING SYSTEM
A switching system is an easy solution that can allow
on demand basis the connection of any combination of
source and sink stations. AFTN switching system can be
classified into 3 (three) major categories:
1. Line Switching
2. Message Switching
3. Packet Switching.
Line Switching
When the switching system is used for switching lines
or circuits it is called line-switching system. Telex
switches and telephones exchanges are common
examples of the line switching system.
Message Switching
In the Message Switching system, messages from the
source are collected and stored in the input queue
which are analyzed by the computer system and
transfer the messages to an appropriate output queue
in the order of priority. The message switching system
works on store and forward principle. It provides good
24 | P a g e
line utilization, multi-addressing, message and system
accounting, protects against blocking condition, and
compatibility to various line interfaces.
Packet Switching System
This system divides a message into small chunks called
packet. These packets are made of a bit stream, each
containing communication control bits and data bits.
The communication control bits are used for the link
and network control procedure and data bits are for
the user.
A packet could be compared to an envelope into which
data are placed. The envelope contains the destination
address and other control information. Long messages
are being cut into small chunks and transmitted as
packets. At the destination the network device stores,
reassembles the incoming packets and decodes the
signals back into information by designated protocol. It
can handle high-density traffic. Messages are protected
until delivered. No direct connection required between
source and sink. Single port handles multiple circuits
access simultaneously and can communicate with high
speed.
25 | P a g e
• SIGNIFICANCE OF AMSS
Safe, economic and orderly movement of Air traffic
depends largely on an efficient communication system.
The communication system must be able to provide an
accurate and speedy exchange of aeronautical
information, such as, Air Traffic Service (ATS) messages
consists of Flight Plan, Departure and Estimate
messages etc. between stations to enable them to
control the air space and movement of Air traffic in an
orderly manner. With the advent of high speed
aircrafts, increasing number of flights in the airspace
across the continent and the competitive operation of,
Air Traffic management has become a difficult task. In
order to facilitate Air Traffic Control the information
available to the Air traffic service personnel should be
fast and accurate. Delayed information can lead to a
disaster, both in the air and ground .To overcome the
above (AFTN) messages is a must as per the ICAO
standards.
26 | P a g e
Networking Concepts Used in
AMSS
• NETWORK TOPOLOGY
The topology of a network is the, geometric
representation of all the links and linking devices
(usually called nodes) to one another. There are four
basic topologies possible: mesh, star, bus, and ring.
Topology
Mesh
In a mesh topology, every device has a dedicated
point-to-point link to every other device. The term
27 | P a g e
dedicated means that the link carries traffic only
between the two devices it connects.
Advantages:
1. Eliminating the traffic problems.
2. A mesh topology is robust. If one link becomes
unusable, it does not incapacitate the entire system.
3. Privacy or security. When every message travels
along a dedicated line, only the intended recipient
sees it.
Disadvantages:
1. Installation and reconnection are difficult.
2. The sheer bulk of the wiring can be greater than the
available space (in walls, ceilings, or floors) can
accommodate.
3. The hardware required to connect each link (I/O
ports and cable) can be prohibitively expensive.
Star
28 | P a g e
In a star topology, each device has a dedicated point-
to-point link only to a center controller, usually called a
hub.
Star topology.
Advantages:
1. A star topology is less expensive than a mesh
topology. 2. It easy to install and reconfigure.
Disadvantages:
1. If hub fails complete NM/ fails which is a main
disadvantage of star topology.
Bus
A bus topology on the other hand, is multipoint. One
long cable acts as a backbone to link all the devices in a
network.
Nodes are connected to the bus cable by drop lines
and taps. A drop line is a connection running between
the device and the main cable.
Advantages:
1. A bus topology include ease of installation.
29 | P a g e
2. A bus uses less cabling than mesh or star
topologies.
Disadvantages:
1. Difficult to add new devices.
2. Signal reflection at the taps can cause degradation in
quality.
3. A fault or break in the bus cable stops all
transmission, even between devices on the same side
of the problem.
Ring
In a ring topology, each device has a dedicated point-
to-point connection only with two devices on either
side of it. A signal is passed along the ring in one
direction, from device to device, until it reaches its
destination.
Advantages:
1. A ring is relatively easy to install and reconfigure. Each device is
linked only to it immediate neighbors (either physically or logically).
30 | P a g e
Disadvantages:
1. In a simple ring, a break in the ring (such as a
disabled station) can disable the entire network.
31 | P a g e
NAVIGATION
32 | P a g e
➢ In the twentieth century, electronics also
entered in the Aviation field. Direction
finders and other navigational aids enabled
the navigators to obtain 'Fixes' using
electronic aids only. Hence such aids
became more and more popular and came
into extensive use.
TYPES OF NAVIGATION
• GROUND BASED navigation system
• SATELLITE BASED navigation system
33 | P a g e
GROUND BASED NAVIGATION SYSTEM
Navigation in civil aviation is accomplished
by means of various equipments called
NAVIGATIONAL AIDS (NAV-AIDS)
NAVIGATION FACILITIES
VHF Omni-directional Range(VOR)
34 | P a g e
Non-Directional Beacon(NDB)
Instrument Landing System (ILS)
Distance Measuring Equipment (DME)
VHF Omni-directional Range
(VOR)
It is very high frequency and directional
omni-range equipment which measures
the azimuth angle with respect to the
magnetic north. When an aircraft comes
overhead a VOR it gives the pilot the
direction it must move in order to reach
the next VOR on the air route to its
destination.
36 | P a g e
VOR EQUIPMENT PROVIDE ABSOLUTE
BEARING TO AN AIRCRAFT WITH RESPECT
TO MAGNETIC NORTH IRRESPECTIVE OF
AIRCRAFT HEADING.
PURPOSES OF VOR
* The main purpose of the VOR is to provide
the navigational signals for an aircraft
receiver, which will allow the pilot to
determine the bearing of the aircraft to a
VOR facility.
* VOR enables the Air Traffic Controllers in
the Area Control Radar (ARSR) and ASR for
identifying the aircraft in their scopes easily.
They can monitor whether aircraft are
following the radials correctly or not.
* VOR located outside the airfield on the
extended Centre line of the runway would
be useful for the aircraft for making a
straight VOR approach.
* VOR located enroute would be useful for
air traffic 'to maintain their PDRS (PRE-
37 | P a g e
DETERMINED ROUTES) and are also used as
reporting points.
* VORs located at radial distance of about
40 miles in different directions around an
International Airport can be used as holding
VORs for regulating the aircraft for their
landing in quickest time.
Non-Directional Beacon(NDB)
It provides relative bearing to the
aircraft with respect to the direction of
NDB equipment irrespective of aircraft
heading.
➢NDB GIVES THE RELATIVE BEARING.
38 | P a g e
Instrument Landing System(ILS)
It is the instrument landing system
which helps the aircraft to land safely.
The Instrument Landing System
provides a means for safe landing of
aircraft at airports under conditions
of low ceiling and limited visibility.
The use of the system materially
reduces interruptions of services at
airports resulting from bad weather
39 | P a g e
by allowing operations to continue at
lower weather minimum.
The function of an ILS is to provide
the PILOT or AUTOPILOT of a landing
aircraft with the guidance to and
along the surface of the runway.
It also increases the traffic handling
capacity of the airport under all
weather conditions.
This guidance must be of very high
integrity to ensure that each landing
has a very high probability of
success.
The basic philosophy of ILS is that
ground installations, located in the
vicinity of the runway, transmit
coded signals in such a manner that
pilot is given information indicating
position of the aircraft with respect
to correct approach path.
It consist of :
40 | P a g e
1.Distance Measuring Equipment(DME)
- Gives the slant distance of the
aircraft from the runway.
41 | P a g e
The left side has a 90Hz
modulation and right has a 150Hz
modulation.
The overlap area provides the on-
track signal.
Difference in Depth of
modulation will align the aircraft
with the runway center line.
DME
Distance measuring equipment (DME) is a
transponder-based radio navigation technology
42 | P a g e
that measures slant range distance by timing
the propagation delay of VHF or UHF radio
signals.
Developed in Australia, it was invented by James
"Gerry" Gerrand under the supervision of Edward
George "Taffy" Bowen while employed as Chief of the
Division of Radio physics of the Commonwealth
Scientific and Industrial Research Organisation (CSIRO).
Another engineered version of the system was
deployed by Amalgamated Wireless Australasia Limited
in the early 1950s operating in the 200 MHz VHF band.
This Australian domestic version was referred to by the
Federal Department of Civil Aviation as DME (D) (or
DME Domestic), and the later international version
adopted by ICAO as DME.
DME is similar to secondary radar, except in reverse.
The system was a post-war development of the IFF
(identification friend or foe) systems of World War II.
To maintain compatibility, DME is functionally identical
to the distance measuring component of TACAN.
43 | P a g e
Timing
SEARCH MODE: 150 interrogation pulse-pairs per
second.
The aircraft interrogates the ground transponder with
a series of pulse-pairs (interrogations) and, after a
precise time delay (typically 50 microseconds), the
ground station replies with an identical sequence of
pulse-pairs. The DME receiver in the aircraft searches
for reply pulse-pairs (X-mode= 12 microsecond
spacing) with the correct interval and reply pattern to
its original interrogation pattern. (Pulse-pairs that are
not coincident with the individual aircraft's
interrogation pattern e.g. not synchronous, are
referred to as filler pulse-pairs, or squitter. Also, replies
44 | P a g e
to other aircraft that are therefore non-synchronous
also appear as squitter).
TRACK MODE: less than 30 interrogation Pulse-pairs
per second, as the average number of pulses in
SEARCH and TRACK is limited to max 30 pulse pairs per
second.
The aircraft interrogator locks on to the DME ground
station once it recognizes a particular reply pulse
sequence has the same spacing as the original
interrogation sequence. Once the receiver is locked on,
it has a narrower window in which to look for the
echoes and can retain lock.
Distance calculation
A radio signal takes approximately 12.36 microseconds
to travel 1 nautical mile (1,852 m) to the target and
back—also referred to as a radar-mile. The time
difference between interrogation and reply, minus the
50 microsecond ground transponder delay, is
measured by the interrogator's timing circuitry and
converted to a distance measurement (slant range), in
nautical miles, then displayed on the cockpit DME
display.
45 | P a g e
The distance formula, distance = rate * time, is used by
the DME receiver to calculate its distance from the
DME ground station. The rate in the calculation is the
velocity of the radio pulse, which is the speed of light
(roughly 300,000,000 m/s or 186,000 mi/s). The time in
the calculation is (total time – 50µs)/2.
Accuracy
The accuracy of DME ground stations is 185 m
(±0.1 nmi).It's important to understand that DME
provides the physical distance from the aircraft to the
DME transponder. This distance is often referred to as
'slant range' and depends trigonometrically upon both
the altitude above the transponder and the ground
distance from it.
For example, an aircraft directly above the DME station
at 6,076 ft (1 nmi) altitude would still show 1.0 nmi
(1.9 km) on the DME readout. The aircraft is technically
a mile away, just a mile straight up. Slant range error is
most pronounced at high altitudes when close to the
DME station.
Radio-navigation aids must keep a certain degree of
accuracy, given by international standards,
46 | P a g e
FAA, EASA, ICAO, etc. To assure this is the case, flight
inspection organizations check periodically critical
parameters with properly equipped aircraft to calibrate
and certify DME precision.
ICAO recommends accuracy of less than the sum of
0.25 nmi plus 1.25% of the distance measured.
47 | P a g e
Technical references to X and Y channels relate only to
the spacing of the individual pulses in the DME pulse
pair, 12 microsecond spacing for X channels and 30
microsecond spacing for Y channels.
DME facilities identify themselves with a
1,350 Hz Morse code three letter identity. If collocated
with a VOR or ILS, it will have the same identity code as
the parent facility. Additionally, the DME will identify
itself between those of the parent facility. The DME
identity is 1,350 Hz to differentiate itself from the
1,020 Hz tone of the VOR or the ILS localizer.
SURVEILLANCE
48 | P a g e
The act of watching or monitoring the behaviour,
activities or other changing information, is said to
be Surveillance.
Surveillance is the monitoring of the behavior,
activities, or other changing information, usually of
people for the purpose of influencing, managing,
directing, or protecting them. This can include
observation from a distance by means of
electronic equipment (such as CCTV cameras), or
interception of electronically transmitted
information (such as Internet traffic or phone
calls); and it can include simple, no- or relatively
low-technology methods such as human
intelligence agents and postal interception. The
word surveillance comes from a French phrase for
"watching over" (sur means "from above"
and veiller means "to watch"), and is in contrast to
more recent developments such as sousveillance.
This mainly includes Radar, CCTV and security
equipments.
RADAR
49 | P a g e
RADAR stands for “Radio Detection And Ranging”.
50 | P a g e
landmarks and other ships, aircraft anti-collision
systems, ocean surveillance systems, outer space
surveillance
and rendezvous systems, meteorological precipitation
monitoring, altimetry and flight control systems, guided
missile target locating systems, ground-penetrating
radar for geological observations, and range-controlled
radar for public health surveillance. High tech radar
systems are associated with digital signal
processing, machine learning and are capable of extracting
useful information from very high noise levels.
51 | P a g e
very weak, they can be strengthened by electronic
amplifiers. More sophisticated methods of signal
processing are also used in order to recover useful radar
signals.
Radar equation
The power Pr returning to the receiving antenna is given by the
equation:
Where
= transmitted wavelength
Gr = gain of receiving antenna
52 | P a g e
Additional filtering and pulse integration modifies the radar
equation slightly for pulse-Doppler radar performance, which
can be used to increase detection range and reduce transmit
power.
The equation above with F = 1 is a simplification for
transmission in a vacuum without interference. The propagation
factor accounts for the effects of multipath and shadowing and
depends on the details of the environment. In a real-world
situation, pathloss effects should also be considered.
Doppler effect
Frequency shift is caused by motion that changes the
number of wavelengths between the reflector and the
radar. That can degrade or enhance radar performance
depending upon how that affects the detection process.
As an example, Moving Target Indication can interact
with Doppler to produce signal cancellation at certain
radial velocities, which degrades performance.
Sea-based radar systems, semi-active radar
homing, active radar homing, weather radar, military
aircraft, and radar astronomy rely on the Doppler effect
to enhance performance. This produces information
about target velocity during the detection process. This
also allows small objects to be detected in an
environment containing much larger nearby slow moving
objects.
Doppler shift depends upon whether the radar
configuration is active or passive. Active radar transmits
a signal that is reflected back to the receiver.
Passive radar depends upon the object sending a signal
to the receiver.
53 | P a g e
Otherthan primary and secondary radar there aai uses
Surface Movement Radar.
CONCLUSION
55 | P a g e
56 | P a g e