This document summarizes the key parameters of 5 units in a flowsheet simulation. Unit 1 introduces a vapor stream at 32°C and 620 kPa with ethane and propane as major components. Unit 3 cools this stream to the same temperature. Unit 5 further heats the stream to 54°C and higher pressure. Unit 2 receives this heated stream, and Unit 4 further heats it to over 126°C. The molar flows, temperatures, pressures, heat flows and compositions of the streams are reported for each unit.
This document summarizes the key parameters of 5 units in a flowsheet simulation. Unit 1 introduces a vapor stream at 32°C and 620 kPa with ethane and propane as major components. Unit 3 cools this stream to the same temperature. Unit 5 further heats the stream to 54°C and higher pressure. Unit 2 receives this heated stream, and Unit 4 further heats it to over 126°C. The molar flows, temperatures, pressures, heat flows and compositions of the streams are reported for each unit.
This document summarizes the key parameters of 5 units in a flowsheet simulation. Unit 1 introduces a vapor stream at 32°C and 620 kPa with ethane and propane as major components. Unit 3 cools this stream to the same temperature. Unit 5 further heats the stream to 54°C and higher pressure. Unit 2 receives this heated stream, and Unit 4 further heats it to over 126°C. The molar flows, temperatures, pressures, heat flows and compositions of the streams are reported for each unit.